similar to: HPEC performance

I'm hoping someone can help me here. I've purchased replacement systems for 3 aging 1.4.x installs. I'm hoping to setup Asterisk 11, dahdi 2.6.1 and Oslec. I'm also moving those installs from Mandriva 10.0 to Debian 6.06 (Squeeze). In my testing, the TE220P PCIe cards that I have, the timing was awful on both slots, so I compiled Kernel 3.6.9 from kernel.org. Timing jumped to

Hello oslec make error on RHEL 2.6.9 : Warning: could not find versions for .tmp_versions/dahdi.mod Warning: could not find versions for .tmp_versions/xpd_fxo.mod Warning: could not find versions for .tmp_versions/xpd_fxs.mod Warning: could not find versions for .tmp_versions/xpd_pri.mod Warning: could not find versions for .tmp_versions/xpp.mod Warning: could not find versions for

Hello list, I'm facing a little issue with dahdi attempting to load the OSLEC echo canceller into my current kernel. After compiling dahdi 2.3.0.1 with OSLEC support, I get the following error when set 'oslec' as the echocanceller: DAHDI_ATTACH_ECHOCAN failed on channel 1: Invalid argument (22) - Similar errors are *NOT* present using other echo canncelers. - I tried adding the

Hi All, I have followed below steps to enable echo cancellation. # cd /usr/src # wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2 # tar xjf linux-2.6.28.tar.bz2 # tar zxvf dahdi-linux-2.1.0.4.tar.gz # ln -s /usr/src/dahdi-linux-2.1.0.4 /usr/src/dahdi # mkdir /usr/src/dahdi/drivers/staging # cp -fR /usr/src/linux-2.6.28/drivers/staging/echo /usr/src/dahdi/drivers/staging # sed -i

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

Yesterday I pulled in the latest svn of Dahdi and added the files from a recent kernel in the drivers/staging/echo structure and modified the Kbuild file so it would compile without error. I insmod'ed the module in, and modified my system.conf has echocanceller=oslec. cat /proc/dahdi/1 shows: Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER) IRQ misses: 1 1

Hi List. I've bought a new server for my home asterisk installation and I'm trying to install asterisk with dahdi drivers and OSLEC. To do that I've got the svn dahdi-linux trunk revision 5366 and the echo subproject from the 2.6.28-rc6 Linux kernel sources. As reported in the dadhi README file I've uncommented out the two OSLEC related lines at Kbuild file in the

Hi, I setup an asterisk system (asterisk 1.8-rc3, dahdi-linux-2.4.0 with dahdi-extra from Tzafrirs git, kernel 2.6.35.4). The hardware is an older pc system with Celeron CPU (2.5 GHz) with a Beronet BN4S0 ISDN card. The system starts without any errors. I discovered a severe issue. The kernel panics on a very small load. The first call normally gets through. If I start the second or third call

I was previously using an old computer running Asterisk 1.2 with zaptel. Once the CPU fried I switch to a new computer and I chose AsteriskNow 1.5 running in 64bits to simplify the installation process. I manage to find my way with configuring dahdi instead of zaptel and to switch all my previous config to the new computer. Now everything is fine except that even if I use the md2 echo

Hi list, I install dahdi-linux successfully with the module of oslec for the echo, but when I specify it in the system.conf the echo canceller oslec it shows me errors: DAHDI_ATTACH_ECHOCAN failed on channel 4: Invalid argument (22) I see that the echo cancellers is supported: mg2, kb1, sec2, and sec because oslec is not supported?, but he has support to compile it with dahdi_linux! best

Trying to build oslec. Following dahdi-linux README I copy drivers/staging/echo to dahdi-linux/drivers/staging. I uncomment the 2 oslec lines in drivers/dahdi/Kbuild. That doesn't work: /home/asterisk/build/dahdi/svn/dahdi-linux/drivers/dahdi/dahdi_echocan_oslec.c:33:35: error: ../staging/echo/oslec.h: No such file or directory So: wget

Hi Who should insert dahdi_echocan_oslec.ko module in Ubuntu 14.04? dahdi start/stop service? I have a test installation that is not launching it when asterisk/dahdi starts. Clues? Regards Ethy

On Thu, 22 Oct 2015 15:06:59 +0300 Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote: > On Wed, Oct 21, 2015 at 01:33:27PM -0200, Ethy H. Brito wrote: > > > > Hi > > > > Who should insert dahdi_echocan_oslec.ko module in Ubuntu 14.04? > > dahdi_echocan_oslec should be built by default. What you may miss is the > 'echo.ko' (OSLEC) kernel module.

Hi - I had a client recently move their asterisk system (asterisk 1.4.26, dahdi 2.2.0.1, aex800 w/vpm module) to a "new" location, a building that's nearly 150 years old. I was not personally able to go there, but the person who did the move said the building's demarc room was "scary"-- water leaks, jumbled and frayed wiring, and all sorts of other fun. The echo on

Hi all, Just want to check from the list experienced personal about the Digium HPEC, where I had purchased the HPEC and wish to run with TDM card Sangoma A200. I can't install HPEC to run with Sangama A200 card, even I had changed my hpec file from i686 to i386. The error that I had as bellow; > Found key 'HPEC-XXXXXXXXXX' for 2 channels. > Found valid HPEC licenses for 2

On Fedora 11, gcc-4.4, I'm trying to build oslec in dahdi-linux, but: [asterisk at asterisk dahdi-linux]$ make make -C drivers/dahdi/firmware firmware-loaders make[1]: Entering directory `/home/asterisk/build/dahdi/svn/dahdi-linux/drivers/dahdi/firmware' make[1]: Leaving directory `/home/asterisk/build/dahdi/svn/dahdi-linux/drivers/dahdi/firmware' make -C

Hi, I've a problem: I can't configure DAHDI with ech canceller OSLEC. I have Asterisk 1.4.24 and DAHDI 2.1.0.2. I compiled also OSLEC. But when in /etc/dahdi/systems.conf I insert value echocanceller=oslec,1-4, command dahdi_cfg -vvvvvvvvvvvv give me an error about oslec. Someone can help me? Thanks Marco -------------- next part -------------- An HTML attachment was scrubbed... URL:

We have been distributing asterisk servers for several years now, and early on decided that hardware echo can was the way to go. Our first few boxes without it had horrid echo problems, and attempts at tuning in 2006 didn't make any difference. We installed a new server yesterday at a client's location with a Rhino 4 port FXO card (HW EC included), and when an inbound call was

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo