similar to: Server for 25-30 phones, sip trunks over the net

For anyone looking for a cheap home ZFS server... Dell is having a sale on their PowerEdge SC440 for $199 (regular $598) through 11/12/2008. http://www.dell.com/content/products/productdetails.aspx/pedge_sc440?c=us&cs=04&l=en&s=bsd Its got Dual Core Intel? Pentium?E2180, 2.0GHz, 1MB Cache, 800MHz FSB and you can upgrade the memory (ECC too) to 2gb for 19$ bucks. @$199, I just

Does anyone on list have experience with Digium hardware in the following servers: Dell poweredge SC440 IBM xSeries x226 Have just had major hassles getting TE205P ISDN cards going in these boxes. No joy so far. Anyone managed to do it yet? Thanks. Mark

Hi all. I have a Dell SC440 running Centos 4.4. It has two 500GB disks in a RAID1 array using linux software raid (md1 is / and md0 is /boot). Recently the root file system was remounted read-only for some reason. The logs don't show anything unusual, presumably the file system was read-only before anythng was logged. Running dmesg showed this error repeated many times: EXT3-fs error (device

I have a Dell SC440 with Centos and Asterisk 1.4.21 and a card openvox D110PG, T1, when a person calling from the PTSN will listen to them but then begins to distort the voice I heard that name. I probe the card in another computer and it works perfectly. Anyone has any idea or help. I'm going crazy with this problem. Install Debian on this server and the same thing happened to me. I bought

Hi all, We are using - a dell sc440(Single dual-core intel xeon 3040, 1.86GHz,1066MHz front size bus 2MB cache) as the asterisk server - dell 400sc(Intel P4) as a SER server - digium isdn card, TE120P at Asterisk server - Bandwidth: 2Mbps/512kbps All SIP Phones are registered to SER server, and SER will route all outgoing calls to Asterisk server. My problem is the sound quality goes down if

Hi, In my application I am JITing thousands of functions, though I am doing it sequantially and running only one at a time. So it is crucial to be able to properly clean up the memory from an old JITed function when JITing and running the new one. I am using Haskell binding of LLVM and my application works OK. However, memory usage increases and never decreases during the run time of my

Hi, I've been very puzzled lately. I installed a phone system for a friend a few weeks ago, and they're having a problem that I can't get rid of, actually 2 problems. Before I go into the problems, let me tell you about the setup. It's a pretty small setup with only 4 handsets, all Polycom 320s, the server is a Dell SC440 with Intel E2180 CPU (dual core, 2GHz) and 512MB Ram.

Perhaps someone with more experience can help me solve this puzzle: Asterisk 1.4.18 on a Dell PowerEdge SC440, CentOS 5, 2.6.18-53.1.14.el5, Digium TDM400 with 3FXO(1-3) and 1FXS(4) Phone service is provided by XO Communications via their XOptionsFlex service (5 analog lines, 3 of which are used by Asterisk). For simplicity I refer to them as xx43, xx44, and xx45 - based on their phone numbers.

%FIRSTSTRU = type { i32, double, i32, i8* } struct { int var1; double var2; int var3; char *var4; }firstStru ; Could someone help? If, running a application in windows with MSVC, I allocate a memmory buffer and call a LLVM function with such buffer, there's a structure alignment problem. If the LLVM function call a C function using the same buffer, it runs fine. Any ideas?

I need to place a SIP FXO gateway in Central America. I've been looking at Quintum products, but the prices are about $150/FXO port. I have a Dell SC400 on the shelf, and I'm considering just installing Asterisk and two TDM04B cards and shipping it down. Does anyone have multiple TDM cards in the SC400? FXO ports on a TDM card are about $75/FXO port. With the Dell, there will be

Hi all, I've just built a new installation of CentOS release 5.3 (Final) and have installed both <http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.6.1.1.tar.gz>Asterisk 1.6.1.1 and subsequently Asterisk 1.6.0.10 (thinking that I was maybe trying to be too cutting edge) on a Dell PowerEdge sc440 server (nothing complex - Pentium Dual core 2ghz - 1gb ram - 70gb

Hi, Was this ever resolved? I'm curious, I'm also in a situation where there may be many (very many) JITted functions over the history of an application (which may be running for many days) Thanks On Mar 20, 2009, at 7:34 AM, George Giorgidze wrote: > Hi, > > In my application I am JITing thousands of functions, though I am > doing it sequantially and running only

Hello, If an ordinary user runs: -- snip -- cat > starv.c <<EOF main(){ char *point; while(1) { point = ( char * ) malloc(10000); }} EOF cc starv.c while true do ./a.out & done -- snip -- This will fast starv the operating system (FreeBSD 6.2). I have tried to limit the number of processes and the amount of memmory consumed (in login.conf). There is also a file /etc/malloc.conf

Hi! Would like to initialize a huge matrix.csc (Pacakge SparseM) with all elements 0 and afterwards set a few alements nonzero. The matrix which I like to allocate is so huge that I can not use A <- matrix(a,n1,p) before: A.csr <- as.matrix.csc(A) because I can not allocate such a huge matrix A. But I believe that the much more memmory efficient model in case of csc matrix should do it for

Hi, I'm having high load, choppy sound and slow responsives with an asterisk server (version 1.2.12.1) that make a peak of 90 channels (around 60 phones calling at max, isn't necessary to reach this peak to get the problem). All the traffic is SIP, with recording for every call. The server has: Intel(R) Xeon(TM) CPU 3.20GHz (with HyperThreading disabled for inestability) 4G RAM 2 DD SCSI

This Index: src/main/altrep.c =================================================================== --- src/main/altrep.c (revision 79385) +++ src/main/altrep.c (working copy) @@ -275,10 +275,11 @@ SEXP psym = ALTREP_SERIALIZED_CLASS_PKGSYM(info); SEXP class = LookupClass(csym, psym); if (class == NULL) { - SEXP pname = ScalarString(PRINTNAME(psym)); + SEXP pname =

Hi all, Just watching for my first time the 'oom-killer' call in a CentOS 4.2 workstation. System was running normally but with high load of nice process, iow, rosetta and seti, others appart, nautilus, etc... i realized that after a night of standby running normally, the next moorning after few manual operations from X-session in local console, it started a massive swapping, this time

Hello my friends, My asterisk is going down randomly, following you will find some errors that i could see in the /var/log/asterisk/message at the moment of the crash: [Feb 5 10:32:45] WARNING[6519] chan_sip.c: Maximum retries exceeded on transmission 1850202354 at 10.4.1.152 for seqno 21 (Critical Response) [Feb 5 10:32:45] WARNING[6519] chan_sip.c: Hanging up call 1850202354 at 10.4.1.152 -

Has anyone on this list succesfully managed to get two (or more) TDM04 (with four FXO each) working on a Dell PowerEdge server? If so, which model? Was it a hassle? I'm doing a seven-line installation and a callbank seems like overkill, I just don't want to get suck with a PowerEdge that gets into an IRQ mess. Thanks in Advance, Tom Hayden

Hi all, I am not able to export an ALTREP object when `gctorture` is on in the worker. The package simplemmap can be used to reproduce the problem. See the example below ``` ## Create a temporary file filePath <- tempfile() con <- file(filePath, "wrb") writeBin(rep(0.0,10),con) close(con) library(simplemmap) library(parallel) cl <- makeCluster(1) x <- mmap(filePath,