similar to: QoS VoIP

Hi there, I need help in implementing Asterisk with LDAP. I' ve installed Asterik 1.4 with CentOS 5.2 and I would like to use with it an existing zimbra LPAD. thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081018/5f725eea/attachment.htm

Hi all, I need a little help, i am studing htb to control user bandwidth (download/upload) and I made a script as below to test. I am testing using ttcp tool from by linux box to other linux (192.168.200.51). my box <---- Linux = more than 128kbit mybot -----> Linux = get 128kbit But I want to control both ways, what am I missing? script: EXTIF=eth0 INTIF=eth1 TC=/sbin/tc DOWN=128

Hi ! I found an excellent article about QoS and traffic shaping for VoIP (Asterisk IAX protocol), which is designed to improve sound quality even over very busy lines. http://www.howtoforge.com/voip_qos_traffic_shaping_iproute2_asterisk Should I just cut and paste all that to shorewall''s tcrules (replacing 4569 with 5060)? Additionally, author of this article uses IAX protocol,

Hello everybody, sorry for bothering you, but after some hours, I''m stuck. I''m living in a student''s foundation where I want to connect lots of people to a tiny DSL link. We have exactly four types of traffic. We want a really hard PRIO solution (as I promised to someone that group X will only use the link capacity which isn''t used by group Y). I could make a

Hello, I''m using Linux kernel 2.6.x and tc (from iproute2 package). I''m trying to use HTB or HFSC scheduler in order to limite the rate of outgoing packets and also in order to minimiez delay for RTP stream. But I didn''t suceed in having this 2 QoS services working. I use Iptables in order to classify packets. Here is my HFSC conf. In fact the pings that i send from

Hello. I'm moving from a very old Fedora Core 1 to CentOS 4.4, what a change!! Three year ago, I wrote some script (network related) and worked very well. Now, I can put into init.d by means of chkconfig and I restarted the system, but always hang when executing my srcipt (in my new centos 4.4). There a manual for making scripts for init.d? there is some new requirement by which it does not

G''Day I would like to be able to use my VOIP telephone over a saturated ADSL link whilst enjoying optimum audio quality and utilising all of the bandwidth I pay for. It is about this situation that I write. HFSC appears to be the queueing discipline of choice for VOIP. In order for this to work, though, do I have to account for the ATM overhead in the small VOIP packets by defining my

ei tuka imam edin pf conf obache pravi mnogo nomera, kato se pusne parvoto koeto e dropva paketi, timeoutva po serverite i t.n.. i speed-a e mnogo baven, vijte ako nqkoi moje da otkrie generalna greshka da reply :) vapreki che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set

Hi, I am trying to setup a shaper for my linux box and I am experiencing some problems. What I am trying to do is priorizing packets on the egress link, therefore I have setup some prio classes etc. The priorizing seem to work but the problem is that the ceil parameter doesnt seem to work on non leafs. This is what stats show: > class htb 1:1 root rate 3000bit ceil 3000bit burst 1602b/8 mpu

I suppose a few questions pop up on this list about access Samba through a firewall. ?I have been very successful running Samba through a firewall, until today. ?I hit a stumbling block. I have a Linux Firewall with the public IP Address of 134.x.x.140 <it is not the exact ip address, but close>. ?I am using NAT and port forwarding to send traffic destined for 137, 138,139, and 445 for BOTH

I have a little home network with one Windows 98 PC and a pc running linux. My idea is that as soon as DSL is finally made available to my area (which I keep getting told will be real soon now) I want to route it through the linux box and up to the Windows PC, using IP masquerading, etc. At present I have samba enabled on the unix box which opens up several worthwhile conveniences to me:

Hi, I am currently working on the TC. I have seen some behaviour which seems to be odd. I know someone in the mailing list would have seen this problem or may have some fix for this problem. When I try to include u32 filters with different priority or pref, I could see the filters being set on all the priority''s irrespective of the priority number. See my sample script below and the

Hi, Sorry to bother you all. I have a typical problem sharing DSL upstream bandwidth with users. I have 3 types of traffic high-priority, medium-priority and low priority. My upstream rate is 960kbits. Traffic (any priority) can vary in bandwidth from 0 to 960kbits. I have a test setup where I can pump 600kbit of high priority sustained and I have 400kbit of low priority traffic sustained. I

Hello, I am trying to get LDAP running. So far, the server is running but I cannot connect to port 389 or the server using webmin or phpldapadmin. It could be my ISP has blocked this port but I'm not sure. I have tried to telnet to port 389 but it is refused. All other services run fine. I user the iptables ruleset found in the IP-Masquerade HowTo. Below is the ruleset I follow for

EHLO tc gurus. New to traffic control. Unfortunately, the politicians here in Denmark have decided that a PC is the same as a television set - so anyone owning a PC and internet connection of over 255 kbit/s must pay DKR 2200/year = EUR 300 = USD 400 in television licence fees :-( This is a lot of money for poor students, so we want to offer the students the *option* of limiting their

I have a connection to the Internet (on eth1), and over this I also have a PPTP tunnel set up (on ppp0). Temporarily I use the (slower) PPTP tunnel for everything, but I really just have to use it for some specific purposes, which are distinguishable by port. So, I want to direct only some specific ports to ppp0, using eth1 for the rest. I have tried following the instructions on

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

Hello, I have a webcam that I wish to view from the internet. It is a wireless linksys model with an ip address of 192.168.1.15. I have it set on port 8081, 192.168.1.15:8081. I am using the IP Masquerade HowTo script. Here's the rule I added to my firewall script: EXTIF="ppp0" INTIF="eth1" EXTIP="`$IFCONFIG $EXTIF | grep inet | cut -d : -f 2 | cut -d \ -f

Hi All Can someone tell me what am I doing wrong? These was suposed to catch icmp type 8. Why ''match u8'' does not work? # tc filter add dev eth0 protocol ip parent 1: prio 2 \ u32 \ match u16 0x0800 0xffff at -2 \ match u8 8 0xff at 20 \ flowid 1:5 Illegal "match" # # tc filter add dev eth0 protocol ip parent 1: prio 2 \ u32 \ match

Is it possible to create 1 filter rule using fw selectors AND u32 selectors? Richard. -- ___________________________________________________________________ Recursion: see recursion +------------------------------------------------------------------+ | Richard Lucassen, Utrecht | | Public key and email address: | |