similar to: Got event 17 (Polarity Reversal)...

Hi ! I ma having trouble with my PTSN line. When I call to my asterisk I get this.. -- Executing [s at from-pstn:3] Hangup("Zap/5-1", "") in new stack == Spawn extension (from-pstn, s, 3) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/5-1' -- Starting simple switch on 'Zap/5-1'[Jan 5 12:45:06] NOTICE[2893]: chan_dahdi.c:6869 ss_thread: Got event 17

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

So made my first forray into 1.4 and DAHDI and hit a problem. (Not convinced this is a DAHDI issue though...) Testing an analogue line and asterisk sees the caller ID being passed, but then fails to detect ringing. A plain old analogue phone plugged in rings just fine. Console output: == Starting post polarity CID detection on channel 4 -- Starting simple switch on

Aloha, I'm finishing up the final touches on this install, and have run into an odd problem. I can't seem to get Caller ID on the analog phone lines working. It's a Digium AEX 410 card. I have Verbose set and a line to print the CID: I have usecallerid=yes and callerid=asreceived set in both chan_dahdi.conf and users.conf [analog] include=>default exten =>

Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1

Hello list, This may or may not be Asterisk related, but if I had hair I'd pull it out over this. I have a TDM400P card in a Dell POWEREDGE 1550 running Asterisk 1.4.30. Everything works great except that every time it rains, I get flooded with this CLI message - == Starting post polarity CID detection on channel 1 -- Starting simple switch on 'DAHDI/1-1'

Hi Can TDM400P detect polarity reversal on FXO module? We have C.O. lines that reverse polarity on Answer and release. Thank You This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you

Using the latest SVN of zaptel and asterisk, I can no longer receive incoming analog calls. The caller just hears it ringing but Asterisk doesn't pick up. I am seeing these error messages: [Apr 9 09:38:02] WARNING[16564]: chan_zap.c:6470 ss_thread: CallerID returned with error on channel 'Zap/2-1' [Apr 9 09:38:50] WARNING[16570]: chan_zap.c:6470 ss_thread: CallerID

Hello, I have : answeronpolarityswitch=yes on chan_dahdi.conf but it's making all my lines answer on polarity reversal, this causes a problem for PSTN lines, so how can I set these lines to answer immediately (when it rings)? thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have Asterisk 1.4.18 and I have been running call center queues on it. Today it suddenly stopped adding inbound calls to queues. I am facing with following error: app_queue.c:3939 queue_exec: unable to join queue "myqueue" In extension file: Queue(myqueue|t|||120) And my agents are joining in following

Hi, the new Grandstream release for the ATAs allows the setting of the FXS impedence, the Onhook Voltage and the Polarity Reversal. Anyone know how these should be set in Germany? -- Best regards Peer Oliver Schmidt

hi: In my zapata.conf i have 4 fxo configured channels,for fxo number 1 to 3 i added polarity reversal property but for fxo number 4 i didnt add polarity reversal property but it still giving me on cosole that fxo number 4 is polarized (because the line on fxo number 4 is not polarized). what i want to do is to not let polarity reversal take effect on fxo number 4. that what i have in my

I would like to know if any body tried to connect gsm gateway with polarity reversal to fxo module at asterisk server ,and if the polarity reversal solve the problem of the answer and hangup supervison on calls .i appreciate any help.Thanks in advance;Wassim _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's

Hi all, i use asterisk 1.2.7 and i have a problem with callerid. i use sangoma a200 cards. one fxo one fxs module i have these scenario - bob calls adam, where bob calls into my asterisk and adam picks up "from" my asterisk - bob and adam are speaking to each other - meanwhile eve calls adam, adam hears a beep, and knows there is an other caller on line. - bob and adam stop seaking

pstn incoming on a TDM400P, sometimes i* won't answer, going into a loop like this: -- Starting simple switch on 'DAHDI/4-1' [Jan 16 10:38:55] NOTICE[5808]: chan_dahdi.c:7130 ss_thread: Got event 18 (Ring Begin)... [Jan 16 10:38:57] NOTICE[5808]: chan_dahdi.c:7130 ss_thread: Got event 2 (Ring/Answered)... [Jan 16 10:38:57] NOTICE[5808]: chan_dahdi.c:7299 ss_thread: MWI: Channel 4

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

Hi, Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine. With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line polarity reversal. Stutter dialtone is generated as expected. Has anyone else seen this? Is there anything special I need to do for 1.6.1 to make FSK MWI work? Thanks, --Barry

Hi, I am trying to connect a doorbell to a Xorcom device. And the setup is quite simple. But when I push the doorbell all I see on the asterisk cli is: -- Starting simple switch on 'Zap/11-1' [Apr 2 13:00:40] DEBUG[8771]: chan_dahdi.c:6180 ss_thread: not enough digits (and no ambiguous match)... -- Hungup 'Zap/11-1' I defined the extension s,h,i,t,T etc... in my context. Any

I'm testing a TDM400P with FXO module to receive incoming calls from an analogue line and send it to a SIP device. To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity. The problem is that when a call is finished, the TDM400P seems to require about 20 seconds to prepare for the next incoming call. If a new call comes in within 20 seconds after the previous call was

Hi! I want to get audio from the PSTN before the call is answered so I don't miss when the called phone is busy or if there is some error (like the phone is unavailable or is wrong, etc) and hear the ringing from my telco. I have polarity reversal in my telco for incoming and outgoing calls. If I set answeronpolarityswitch=yes then I get no audio until the call is answered. If I set it to