similar to: chan_misdn troubles

Good Evening, The company I work for is attempting to connect an Cisco ISDN Router to an OpenVOX B200P BRI Card so that we can get it to dial out across an existing ISDN PRI Line also installed in the Asterisk PBX Everything has compiled successfully and the BRI card has been detected when mISDN is started: # misdnportinfo Port 1: NT-mode BRI S/T interface port (for phones) -> Interface

Hi List, I?m having problems compiling chan_misdn: asterisk:/usr/src/chan_misdn-beta-0.0.3-rc4 # make install cc -ggdb -Wall -D_GNU_SOURCE -Wno-missing-prototypes -Wno-missing-declarations -fPIC -I/usr/src/asterisk/include -DAST_CONFIG_DIR=\"/etc/asterisk/\" -I/usr/src/mISDNuser/include -I/usr/src/linux-2.6/include -I/usr/src/mISDNuser/i4lnet/ -Wall -c -o chan_misdn.o chan_misdn.c

Hi all! I'm getting an error when I try to start asterisk with chan_misdn. I patched my kernel (2.6.12.4), and compiled the whole stuff (kernel, mISDNuser, asterisk, chan_misdn). I got mISDN from http://isdn.jolly.de/download/v3.0/ I'm using a CVS Snapshot of asterisk, which was checked out about 5 hours ago. This is the error: [chan_misdn.so]Aug 15 14:13:29 WARNING[4929]:

Hi all, i downloaded and installed mISDN with 2.6.8 kernel, but when i try mISDN-init scan (or config) i get this error: [!!] FATAL: bc not in path, please install. Anyone can help me. Tnx Giordano -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.17.0/639 - Release Date: 18/01/2007 18.47 -------------- next part

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6

I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0

Hi, is anybody out there who can set the outgoing caller id on ISDN (CAPI or misdn) channels? I've tryed everything what I found in forums, os voip-info.com but no luck. I use a fritz card with CAPI in my first installation (1 BRI), and a hfc 4 port bri card with misdn on other. The first installation have p-t-mp configuration, the second one is p-t-p. Both configuration is EuroISDN in

Hi list, I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in zaptel dir and: make, make install, make b410p. Everything is ok. Now I want to compile Asterisk but can't activate the chan_misdn channel which depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E) When I made the make b410p, all

Hi, I have FRITZ!Card PCI card. I have installed misdn-1.1.0 on stable debian 3.1 with 2.6.8. kernel. Then I reboot system, and it doesn't boot, it stops near "Apache2 starting...". I started my system with "recovery" kernel, and tun off misd, then my system works fine. I think it's problem with memory. Has anybody debian and misdn working fine? Maybe you can

Hi, I have a Digium B410P 4-port BRI card. I installed misdn 1.1.3 with hfcmulti driver and misdnuser 1.1.3. I configured the card "correctly" as misdnportinfo reports: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Interface is Poin-To-Point. -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- Port 2: TE-mode BRI S/T interface line (for

I've just bought an OpenVOX B200p ISDN card - and if I remember correctly from last time I used one of these - it is possible to use either DAHDI or mISDN with it. Are there any factors to consider when choosing which software to use? Is one better than the other - or does one have features which are not present in the other? I will be using it for a simple PBX, with 2 ISDN channels as

hi i am experiencing some problems with the configuration of an BN8S0 Beronet card. I've downloaded last CVS of mISDN ans mISDNuser, i patch the kernel 2.6.16.18 and the enabled the following: <*> ISDN support x x Old ISDN4Linux ---> x x --- CAPI subsystem x x <M> CAPI2.0 support x x [*] Verbose reason code reporting (kernel size +=7K) x x [*]

Good Afternoon, Can someone please explain what Y-cords are available out there and how they can be used with Aastra or other VoIP phones? Maybe with or WITHOUT headsets? Isn't a Y-cord traded for soft Barge in these days? Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I've got a device that seems to become unreachable for about 2 minutes, every hour. From what I can tell, it isn't due to network or server issues. Any ideas? TIA. -- Mike Diehl Diehlnet Communications, LLC. Voice: (505) 903-5700 Fax: (505) 903-5701

Hi, Can I use a simple HFC PCI (Cologne chip) card with asterisk 1.6.x ? What drivers are available? Thanks,

Hello asterisk-users, My SIP phones are in pickupgroup, and if some of them ringing from other phone can pick up with *8 as usual. But I want to know if this happen. I've tried the a extension, but seems not working. Any other idea? -- Best regards, Gergo mailto:csibra at gmail.com

Hi all, With the gamut of FXO cards out there, I'm looking for a recommendation for home use. I have a nicely working Asterisk 1.4 system that just requires an FXO card to connect my NTL PSTN to it. My previous X101P clone seems to have kicked the bucket. Any suggestions would be greatly appreciated. Regards Kyle -- Kyle Gordon kyle@lodge.glasgownet.com http://lodge.glasgownet.com

Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables

What are the advantages in using mISDN over other solutions? If I knew why it was a good idea (like does it have better sound quality than alternatives?) then I would put the time in to test it, and also improve the Wiki. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Thomas H?ger Sent: Friday, January 21,

hello there, I am facing an issue with misd/misdnuser/lcr in the system I am running debian 7 and I managed to install from git misdn/misdnuser but in lcr I am getting: chan_lcr.c: In function 'load_module': chan_lcr.c:3520:24: warning: assignment makes pointer from integer without a cast [enabled by default] make[2]: *** [chan_lcr.po] Error 1 make[2]: Leaving directory