similar to: callwaiting callerid

Hi all, In order to get the CallerID from PSTN (X100P) I have modified callerid.c file like that: callerid.c [line 256] from: case 3: /* Number (for Zebble) */ to /*case 3: Number (for Zebble) */ Without this modification my own number was displayed as the inoming call CallerID. Now I want to go further. I have activated CallWaiting support on the POTS line. When someone calls and I am in

I have a Digium TDM400p (1 FXO, 1 FXS) with the FXS module connected to a standard analog handset with caller id display (US caller ID). Although it appears that caller id information is coming into asterisk (it shows up in voicemail), I can not get it to display on the analog handset. Is there anything special I need to do to send the caller id info out the FXS port? I've tried a few

I've got a rather strange callerid problem and don't know how to debug it. I've got two X100P cards installed in a RH9 box and both are connected to individual pstn pots lines. Both are equipped with callerid and both display callerid info on regular analog phones (verified 100%). Incoming and outgoing calls are handled just fine. When an incoming call arrives on one X100P card, *

Asterisk Users, I am running Asterisk-1.4.11 on a Debian "Etch" system. On an occasion, when customer calls into my Asterisk Box, I get this error messagefrom Asterisk "CallerID returned with error on channel Zap/3-1" , causing all my zap channels to be busy. So, I cannot make any calls in, nor out. I am located in the United States. Is there any other suggestions,

Specs FC2, Asterisk 1.0.0, Zaptel 1.0.0 TDM400P Port 1 FXS Port 4 FXO Standard analogue handset plugged in with pstn line. Problem: When I go to dialout it drops numbers on the outgoing number. Keys dialed from handset were 9 0418800185 I tried hitting the keys slowly as well as at my normal speed, all tones are heard in the handset for all numbers.

I've been working on the local side of asterisk for several days, and I have the in-house dial plan pretty well corn fingered to my satisfaction. Today I began working on the other side to make asterisk do things like place an outgoing call to PSTN and route an incoming call from PSTN. I'm using a TDM11B with a single fxs and a single fxo. My analog handset is plugged into the port

Hi, I've set up an Asterisk as voip gatway: VOIP <-> Asterisk <-> hfc-s card <-> NTBA <-> Siemens Gigaset Dect ISDN pbx. Outgoing calls from dect handset to the world are working. Incoming calls don't even ring the handset. I'm using the dahdi driver with the zaphfc kernel module. The hfc-s card is in nt mode. The msn is set at the dect phone/base station

FC2, Asterisk 1.0.0, Zaptel 1.0.0 TDM400P Port 1 FXS Port 4 FXO Standard analogue handset plugged in with pstn line. Problem: I have 2 analog phones that I use, when plugged directly into pstn line both phones work perfectly, dialing no issues. When I plug the handsets into the TDM400P, one works perfectly the other drops random numbers. Its like the tone is slightly different on the second

Hi all, I've been trying to wrap my mind around this one for several days now. How can I 'debug' the CallerID reception on a Zap/POTS channel? I have a POTS line with CallerID and a Digium TDM11B card right now. I have my signalling set to ks for both sides, can make and receive calls just fine. But I never get CallerID on incoming calls. I get the following messages: Aug 11

Hi All, According to the wiki, we need to have both callwaiting=yes and callwaitingcallerid=yes , and that's what I have in zapata.conf. I can hear the call waiting alert tone when a 2nd call comes in during an established call, and I can switch between the calls without problems. However, CallerID on the 2nd call does not show up with the call waithing alert tones. Can anyone help? Thank

Hi, According to the wiki, we need to have both callwaiting=yes and callwaitingcallerid=yes , and that's what I have in zapata.conf. I can hear the call waiting alert tone when a 2nd call comes in during an established call, and I can switch between the calls without problems. However, CallerID on the 2nd call does not show up with the call waithing alert tones. Am I missing something?

I have two call waiting problems. I have a POTS line into and FXO port and telephones on an FXS port 1) I can't seem to use the flash button(on the phone) to answer a call waiting call. I see the callerid coming though and here the call waiting tone, but I just can't seem to answer it. The flash button seems to have no effect. I have: callwaiting=yes in zapata.conf

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm testing a telephone connected to FXS port of a Sangoma A200 card. But I'm observing that callerid is not working. The configuration that I'm using in chan_dahdi.conf is the following one: - --------------------------------------------------------------------- ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

I'm having real problems with my connection to BT, it is a home line, but after a while it sets an alarm and only a restart of asterisk resets it could some one look at the below configs and suggest any changes to make this more reliable Thanks for your help Robb asterisk version 1.6.1.10 dahdi version SVN-trunk-r7445 dahdi_scan active=yes alarms=OK description=Wildcard TDM400P REV I

Hi, I am using asterisk 1.2.5 and have some problems with asterisk connected with an E1 card to our PRI. Dialling in and out generally works. When someone dials in from a mobile phone, all numbers are sent as a block, and the called extension rings as intended. when someone picks up his phone handset, waits for a dial tone, and then dials in manually, the call will be redirected to the

Hi, I'm just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works.

Hello all, Recently I just instaled asterisk-1.2.14, zaptel-1.2.12, libpri-1.2.4 and Freepbx v.2.2.0. My zapata.conf look like this, (Pasted bellow) The problem is that the asterisk never send the callerID to the phones. I just take a look to the cdr database an there is no callerid too. I do not know why the calledID is not receibed. All this FXO ports are conected to a mobile lines and if I

Hi, I just upgraded by 1.0.x home server to 1.2.2. Overall the upgrade went fine, but a strange problem has cropped up with the CALLERID name value of incoming calls from the X101P card. When an incoming call is presented (via Vonage ATA), the calledid value getting double quotes up from: -- Executing NoOp("Zap/1-1", """WIRELESS CALLE" <1404xxxxxxx>") in

Hi there, So I've finally got our Definity and * box talking back and forth, but can't figure out how get callerid sent from the Definity to *. Has anyone had any success with this? I've tried every combination of zapata.conf variables pertaining to callerid with the same results: Accepting call from '' to 'xxxx' on channel 0/1, span 1. On the SIP phones I receive the

Hi All, I'm trying to get a Cisco 7905g IP Phone to work with our Asterisk server but I'm having problems getting the phone to answer a call or make a call. I'm using the stable branch of the asterisk CVS on a RH9 box. I have got the phone to register with * and it retrieves it's extension number, date & time etc., but when I pick the handset up it's just dead silence