similar to: rc6: Dunno what to do with STUN message 0101 ??

After struggling with one way audio issues as a result of STUN binding errors on both the Asterisk side and the Chrome side, we've decided to just simply go with a TURN relay for RTP packets until the issues are resolved. I configured rtp.conf so that all of the STUN related entries are commented out, and I use the following TURN configuration instead: turnaddr=numb.viagenie.ca:3478 ; ;

Trying to use gtalk: -- Executing [andy at ipkall:2] Dial("SIP/ipkall-00000000", "gtalk/andy-gtalk/+1xxxyyyzzzz at voice.google.com") in new stack [Apr 1 10:41:53] ERROR[2416]: chan_gtalk.c:1934 gtalk_request: No XMPP client to talk to, us (partial JID) : andy-gtalk gtalk.conf [general] context=google-in ; Context to dump call into allowguest=yes stunaddr =

I am experiencing a "606 not Acceptable" error trying to set up an Asterisk server as an ekiga.net client. My server is behind a firewall with NAT routing. I have googled this problem and read about Asterisk feeding its local ip address to ekiga.net. That seems to be my problem. I tried putting stunaddr=stun.ekiga.net into the sip.conf file under [ekiga]. I also tried

Dear all, I have enabled stun module and configured it in asterisk , but asterisk not using stun returned public ip address for any of the sip requests going out of my network. i have done settings as below res_stun_monitor.conf settings: [general] stunaddr = stun.ideasip.com stunrefresh = 30 stun show status Hostname Port Period Retries Status ExternAddr

is there general documentation on how asterisk behaves as a stun client (besides res_stun_monitor.conf) ? e.g.,: * can asterisk use multiple stun servers ? (im interested in availability, not data parity) * what is the relationship between gtalk.conf's stunaddr and res_stun_monitor.conf ? will duplicate queries be sent ? * Does asterisk provide some call (through AMI,

Hello list when trying to set up webRTC communications with sipjs client package (tried 0.7.0, 0.10.0 and 0.19.0), I see in the asterisk debug log-file the following : DEBUG[30891][C-00000000] chan_sip.c: Processing media-level (audio) SDP c=IN IP4 99.88.77.66... OK. DEBUG[30891][C-00000000] chan_sip.c: Processing media-level (audio) SDP a=rtcp:9 IN IP4 0.0.0.0... UNSUPPORTED OR FAILED.

Hi people! Do you guys know where to find a STUN Server Howto?! Why?! We all know, to get Asterisk behind an NAT Router to run, is a bit tricky, and you might have to fire a lot of holes in your firewall. However, I would appreciate it very much if somebody could give me great links of how to set up a STUN Server. Tamer

Does anyone know if the program stunbdc, which prints one's IP address, is available in CentOS-5? It comes with the libnice package in Fedora-11. ------------------------------ [tim at rose ~]$ stunbdc -4 stun.ekiga.net Server address: 75.101.138.128 port 3478 STUN transaction started (timeout 600ms). STUN unknown: 0 mandatory attribute(s)! Received 88-bytes STUN message No

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm trying to connect to ekiga.net through a client connected to my Asterisk server. For it I am being based on this [1] document. Next I put the configurations that I am using. /etc/asterisk/sip.conf: ; Outgoing to ekiga.net [ekiga] type=friend username=MyUser secret=MyPass host=ekiga.net canreinvite=no qualify=300 nat = yes stunaddr =

ekiga registration fails. I've set nat = yes ( also blank ) and i've set externip. Anybody have a sip.conf that works? Here's the sip debug: Reliably Transmitting (NAT) to 86.64.162.35:5060: REGISTER sip:ekiga.net SIP/2.0 Via: SIP/2.0/UDP 10.10.11.180:5060;branch=z9hG4bK17818198;rport Max-Forwards: 70 From: <sip:test at ekiga.net>;tag=as64618445 To: <sip:test at

I have been trying out several stun servers with Asterisk 1.6.0.9 and 1.6.1.0 and I keep getting the following message: [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]:

=20 Andrew Fenn wrote: > You don't need their program to use justvoip, voipdiscount, etc=2E You > can use any sip client to connect to Betamax servers=2E Try Twinkle=2E >=20 > On Mon, Jul 27, 2009 at 11:24 PM, miroa84<wineforum-user at winehq=2Eorg> wrote: >=20 > > I tried to install justvoip several times and I cannot install it=2E Can somebody tell me how to

I have two phones, one does not need stun, the other one needs. All settings are identically, except the number/password and said above stun - not stun I use codec in the order: g729 g711u g711a Any ideas, why the user can hear me, but I cannot hear him (stun) while the other user without stun has no problem. bye Ronald

Hi Everyone. I'm in a quandry & don't know which way to go. - Obviously I'm an Asterisk newbie although I've been watching this list for over 2 years now. I've got an Asterisk box (actually, it's an AsteriskNOW box) up and running here at home. - It's on my home LAN - NAT'ed behind my LinkSys router. - On the same LAN I've got a Cisco 7940, 7960, and

Howdy, I have the following issue and would like to know if anyone has got around this before. IP Phones - Linksys 942 Sip server - Asterisk 1.4.13 Stun server - Vovida Ok heres the issue. We have multiple client phones on their own network behind a natted connection. We have setup the phones to be natted and also pointing to our stun server. Now when the phones make an outside call to the PSTN

Asterisk Project Security Advisory - ASA-2007-017 +------------------------------------------------------------------------+ | Product | Asterisk | |--------------------+---------------------------------------------------| | Summary | Remote Crash Vulnerability in STUN implementation |

Asterisk Project Security Advisory - ASA-2007-017 +------------------------------------------------------------------------+ | Product | Asterisk | |--------------------+---------------------------------------------------| | Summary | Remote Crash Vulnerability in STUN implementation |

Hi, I am trying to register SIP clients which are behind NAT on different network. In order to achieve this goal I think I need STUN Server . I downloaded STUN Server from http://internap.dl.sourceforge.net/sourceforge/stun/stund_0.96_Aug13.tgz But I don't know how to install/configure it. And please advice me that STUN server is good idea for this scenario? Thanks in advance Wazb

HI all! I'm looking for some infos to configure stun server support for a SIP peer. I've installed Asterisk 1.4.3, but searching for stun support in chan_sip (sip.conf) i've found nothing, only a "misterious" externip = stun... But where i have to put the ip of stun server? No infos around Google and forum! :-) Thank all, regards -- Marco Ciacci Asterisk Admin Windows

Hello, I'm having intermittent STUN trouble. Every one out of perhaps 5 reboots the PAP2 contacts STUN ... on the other attempts it just skips that step all together. I have been verifying this using ethereal which shows the distinctive STUN server DNS lookup followed by about 10 STUN queries (when it works - when it doesn't it skips all that including the initial DNS lookup ...