similar to: BLF call pickup on Linksys SPA932

We are having an issue with the SPA962/932 combo where the phone and the sidecar will reboot unexpectedly ? could be onhook, could be on a call, doesn?t seem to matter. I read that certain early firmware revisions could cause this so I?m running what was a week ago the newest available (5.1.18). A call to Linksys support suggested that I ensure that the phones are using a recent firmware version

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Greetings all. First off, thank you for your time on this. I have spent literally 12 hours searching every forum and article I can find, and I'm going cross-eyed, so I need to bother everyone with this. I am running * 1.2.37, and I am trying to get the hints working, so I can turn one of my SPA962's LED's red when someone parks a call. I have used Button #3 on my SPA962 to

Would anyone happen to have some examples of polycom configs, specifically the 650 with sidecar for blf. I have the asterisk side all configured since I've set up blf with other types of phones, but I'm missing the polycom side. I've put together a <mac>-directory.xml, and the sidecar now lists numbers as speed dials but does not subscribe to blf.

Hello ! I am having troubles setting up Busy Light Fields (BLF) in asterisk 1.4.18 The things work up to 80%, I can transfer the call by BLF button and I can see the green (free) status and red (busy) status. What I cannot do is to accept the call when someone rings a remote extension. The BLF button starts to blink in red telling me that the call is ringing on remote extenson, but if I press it,

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

Hi, Is anyone aware of a SIP hardphone with Busy Lamp Fields supporting 2 colors (or more) ? This could be very useful to support extended presence, for instance. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090519/0b8f1b62/attachment.htm

Is there anyway to "spoof" a BLF signal to a phone from within a dialplan? That being so I can turn a BLF light on or off on a phone when a certain thing happens in a dialplan?

Hi, I was wondering if anyone stumbled upon the correct event in a sip NOTIFY (from a SUBSCRIBE) to make the BLF lamps on a Linksys/Cisco SPA9xx/5xx go yellow? I'm trying to differentiate between "On the Phone" and "DND" with the BLF. Thanks. -- James

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

has anyone done it? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080528/ff622d28/attachment-0001.htm

I'm trying to get the BLF to work correctly on my Polycom phones. I have the buddy watch working correctly, but can't get the BLF to change based on the state... Example: When an extension is ringing, I get the same 'red light' that I get when the extension is actually in use... I was wondering if anyone had any experience with getting the Polycom phone to

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

I have servers setup in versions 11 and 13. Between two 11 servers, I had no issues sharing BLF, and assigning the hints on my Cisco 525G2 phones. I've upgraded to 13 on one of these servers, and now can't share BLF. I get something like... [2017-07-15 22:35:49] NOTICE[3483]: res_pjsip/pjsip_distributor.c:347 log_unidentified_request: Request from '"Travis Ryan" <sip:612

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Hi The blf-crypt password schema mentioned in the docs could be a solution to my auth problem. However, the docs state that actual support depends on the glibc. Mine apparently doesn't. Does support depend on the glibc's version (mine is 2.15-r2)? Maybe someone with access to a box with a good enough glibc could do the following and post the hash for the plain password "test"?

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

I have a setup with Yealink phones & Asterisk Server (all latest patches). I am using BLF to display the states of other phones. While this works MOST of the time (busy, being called) it does NOT work when a phone is NOT regisstered at all, the yealink phones display a green dot EVEN if a phone is turned off (try explain this to users, they are shaking their heads!!!) I can see on the

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}