similar to: Call-Limit on Asterisk Cluster

hi, i have this problem on call-limit, the call does not get limited. =D i created the limit on a SIP trunk not on the extension. i had it setup on realtime, call-limit tinyint(5) unsigned. unfortunately when i tried 3 calls all went thru. so i thought maybe it was the realtime issue i added on sip.conf [trunk-100-1000] type=peer host=10.20.30.40 call-limit=1 i removed the entry on the

Hi, Is it possible to use realtime for Music On Hold? Is it also possible to store the music/audio files on the database, same way a voicemail can be stored on the database? Thank You Regards, Nhadie

Hi, Would just like to inquire if anyone here has a setup of asterisk to send traffic to AS5400 connected to an SS7-PRI.? this is more of a AS54 question, as i've been reading and i always stumble upon PGW2200 as a requirement to handle SS7 signaling on the AS54. Has anyone able to send calls from asterisk to an as 54 with SS7-PRI without PGW2200? TIA Regards, Nhadie --------------

I have a pair of Asterisk 11.5.1 servers operating as a load balanced cluster, with DNS SRV records set up to weight them 60/40 relative to each other (both at priority 0). The back-end is MySQL Realtime, and everything works pretty well with the Cisco SPA phones & ATAs that represent the majority of my endpoints. I recently tried to add an iPhone with the Bria softphone application, to

Hi, What does retransmitting NAT means? I have a client that uses SPA 942, and his phone sometimes cannot be called. i did a sip sebug and i keep on seeing retransmitting NAT. on the realtime it shows that it is registered, so when i try to call it , asterisk thinks it is still online so it tries to reach it instead of saying it's unavailable, [Oct 9 11:10:33] -- Called 103100 it

unix-odbc with Asterisk Realtime is one good way to use a different backend DB than MySQL. I haven't heard of "bit rot" problems running it over long times, but I'd like to if there are any. I'm particularly interested in seeing reports of Asterisk Realtime backed by Postgres. The problem with pointing dialplan DB functions like Set(DB) at unix-odbc (or any relational

Hi, I'm running asterisk realtime, i had prob when a user does not unregister properly. I tested with SPA942 and a PAP2, when phone is registered, i call using the SPA using x-lite no problem, but when i unplugged the power, it does not unregister properly, so asterisk think SPA942 is still registered, when i call using x-lite, asterisk tries to call it.so it gets stuck at [Aug 11

Asterisk is an excellent PBX system, and makes a very good endpoint in the SIP chain for all sorts of things -- IVR systems, voicemail applications, automated messages, etc. It has an extremely well-written CDR engine, so many people mesh it with billing applications to produce accurate accounting information. It also is fully aware of the media stream, which means it's capable of cutting

We've got this configuration : Cisco as5400 --- asterisk main server ---- asterisk for cells ---- gsm gateway cisco and the gsm gateway are connected to asterisk via sip, the two asterisk servers are connected via iax. On a succesful call the cisco (not always, 60% of the times) will keep sending a ringtone to the connected phone, even if the call is answered, actually if the user behind

I have MySQL Cluster set up for OpenSIPS which allows for the best Redundant High-Availability. I was wondering if it's possible for Asterisk to also use multiple database servers for Realtime? Currently with Realtime I am only able to point to a single IP address for a database. If that database server goes down that Asterisk is pointed to then Asterisk won't be able to do anything.

Hi, list. We have a problem with loss peers after 'sip reload', our configuration: Asterisk 11.6-cert1, SIP realtime peers, sip.conf: - rtcachefriends=yes - rtsavesysname=yes - rtupdate=yes - rtautoclear=yes When we do 'sip reload' , peers are removing from available. Before `sip reload` : srv-pbx2*CLI> sip show peers Name/username Host

The Asterisk Development Team would like to announce the release of Asterisk 16.1.0. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk The release of Asterisk 16.1.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release:

Hi All, is it possible to choose outbound route by checking the extension of the caller? e.g extension that starts with 3 goes to outbound route 1 extension that starts with 4 goes to outbound route 2. Basically, i'm hosting two(2) office, extension 3XXX is office 1 and extensions 4XX is office 2, they both have the same dialling pattern so i need to choose route based on source.

The Asterisk Development Team would like to announce the release of Asterisk 16.1.0. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk The release of Asterisk 16.1.0 resolves several issues reported by the community and would have not been possible without your participation. Thank you! The following issues are resolved in this release:

I'm trying to get Asterisk to pass thru calls using the G729 codec. I've got a 7960 phone and my gateway is an AS5400. I got the following messages when debugging SIP (7778881000 is the 7960): WARNING[1872]: channel.c:2115 ast_channel_make_compatible: No path to translate from SIP/7778881000-2874(4) to SIP/as5400-35c1(256) WARNING[1872]: app_dial.c:1002 dial_exec: Had to drop call

Hi, Is there a way to limit only one registration for each user at a time? meaning if a user tries to register, but that user is already registered. i will deny? or is it possible to for a single user at the same time, and when someone calls that user, it will ring both phones? Just want something whereby a user can assign his extension on an IP phone in the office, and assign the same

I've been searching the Internet for information regarding the replacement of astdb with a modern sql engine. There are several reasons one would like to do this. First of all, external applications have a hard time reading/writing to the now-old astdb format. Also (and this is what interests me most), the sql astdb could easily be clustered throughout several servers (I'm looking for a

We have several Asterisk servers (1.6.2.15) all configured for Realtime, all backed by the same database. The Asterisk servers are all listed under DNS SRV records, and SIP ATAs find us this way. Normally, no matter which Asterisk server an ATA connects to, we get our database fields filled out correctly, such as "regseconds", "lastms", "ipadr", etc. However, with

We ran a load test using glusterfs and were able to deliver mail (I can't remember specifically how much per second, maybe 100 messages per second?) without any issues. We did use the glusterfs fuse client and not nfs, and used regular maildir. We developed a mail bot cluster that would deliver mail, and simultaneously receive and delete it with pop and IMAP and we ran into zero issues. We

Hello, I am running version 1.4 with realtime support. I've set (for Snom phones 300/320/360) a call limit of 1 (incominglimit and outgoinglimit fields in the database). - When I used 1.4 SIP SHOW PEER show that it has a call limit of 1. The problem was that when such a phone received a call and did attended transfer it was left "in use" and could not receive new calls. -