similar to: Linksys SPA3102-NA firmware upgrade on Linux

I need another Sipura 3K and the replacement I think is Linksys SPA3102. Any input on how reliable is it? -- #Joseph GPG KeyID: ED0E1FB7

Somebody has 5.1.7 firmware for SPA3102? I'm having issues with inbound/outbound calls using asterisk through SPA3102 with firmware 5.1.10. I've read it has a codec bug, since it doesn't care about what you set up in Preferred Codec. Any help will be appreciated. Sebastian -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I

Hi All, In our small office calls to the PSTN are currently sent via Asterisk and a Linksys SPA3102 (1 x FXO and 1 x FXS): SIP Phone --> Asterisk --> Linksys SPA3102 --> PSTN If the PSTN is in use on SPA3102 I need a way to get the call to then route out over IAX termination. SIP Phone --> Asterisk--> Linksys SPA3102 --> PSTN (In Use)

Hello, i have a SPA3102 and asterisk v. 1.2.18. I also hev a mysql database with cdr. Well all I want is to receive incoming calls from pstn on specified sip account (suppose 8000), and to initiate outgoing calls from all my asterisk sip accounts through SPA3102 device. Someone can explain me what may i set on SPA and asterisk to do this thing. Thank you for your support. -------------- next part

Hi all, i need sample xml configuration files for linksys pap2, linksys pap-2t, sipura 2100, sipura 2102, 1001, 3000 and 3102. All of these are linksys/sipura products. So if anyone has these sample files then plz share. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Ok, I downgraded spa3102 to 3.3.6. Now when I make a call from pstn and call is established asterisk seems to drop the call. However I still hearing ringback on pstn side, call is established again, and asterisk drops the call again, like a loop. -- Executing [preat_admin at nodo:1] Playback("SIP/PSTN-08214948", "horario-atencion/our-business-hours-are") in new stack

I'm faxing from stand alone fax machine via linksys SPA3102 but most of the time only half or quarter page goes through. Did anybody have any experience like this? -- #Joseph

Hi, I've read in this mailinglist archives some notes related to Linksys SPA3102 provisioning but I couldn't find there the answer I'm looking for. Is it possible with this box (mine is unlocked) to store its config file(s) in a TFTP server, and have this(these) file(s) reloaded at boot time, for instance ? In embedded web server, there is a Provisioning tab full of settings but none

Will the DAHDI with OSLEC have any effect one ECHO in Linksys or Sipura adapters? I know Dahdi is a replacement for Zaptel. And Zaptel is mostly for internal cards not external units like Linksys. I have one Linksys 3K that with so echo so bad that it is pretty much useless. -- Joseph

I'm using Linksys SPA3102 adapter and have a strange ring tone: Long-Short-Short or Long-Long-Short-Short Does anybody know which setting adjust this ring tone on SPA3102 Sipura rings normally. I'm not sure if setting are on Regional Tab or User Tab -- #Joseph

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net

First of all, I'm not knocking Sipura/Linksys. I have heard very good things about their products. I'm just wondering if they are the only quality shop on the market. I know about the zoom 5801 where you can't dial out the FXO from SIP, only from the FXS port. And I have heard similar about the HT-488 also. I want to know if anyone else makes ATAs where all of the features work

Hi, I have been considering a purchase of the linksys spa3102 for a couple hours but I would like to know from someone here, wether this device will support faxing on my local asterisk server, I have had success sending and recieving faces with an x100p, and recall that in the old documentation, they mention that if I send/recieve faxes, that it all should be done on the local server for best

Should a Linksys Sipura 2102 be configured with nat=yes even if it is on the local network? I have been having some troubles with a Linksys Sipura 2100 series, which suffers from NO AUDIO after a few calls.. Because it is on the same subnet as Asterisk it is configured with nat=no. When you think of it because the Sipura 2100 is a broadband router, the voice part may be considered as being behind

Hi list, Hopefully, some of our Dutch members can help with this one. I'm also based in the Netherlands and am using a Sipura (Linksys) SPA-3000 (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test system. It works fine, except that the Called ID (CID) is not working. I'm aware that KPN (our local telco) requires a separate subscription to activate CID on POTS

Hi, anyone can confirm if the Linksys's ATA and Router (PAP2-NA and RT31P2-NA) have the same limitation of just one G.729 call like the Cisco ATA 186 ? I'm testing both appliances here and found this issue but could not confirm this anywhere (nothing on the manual, no document or post from any user about this). In my tests they use G.729 only on the first call and G.711 on the

Fry's Electronics has a new Linksys 2 line ATA box for sale for $59.99 retail. They have a version with a router for $89.99. We picked the non-router version up and it seems to be a rebadged Sipura SPA-2000. The box has a Vonage service package inside as well, but it does work with other services. The box also has a "User Guide" meant for end-users that is very well written [no

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->