similar to: Improving the speed of chan_sip

Hi all, I'm using asterisk in a production environment now and this afternoon I got reports complaining that it was not working. Looking at the asterisk console output, I saw it contains lots of error messages as printed below. Unfortunately it is not obvious from the logs as to what started all this. Just before the error messages start, everything seems to be working fine with no problems.

Hi I?m a new user and I do test with my hardware . I have a x100p and telephone vozip. And when I run this command asterisk ?vvvvc for to test it . My computer show it ?warning? [chan_iax.so] => (Inter Asterisk eXchange) == Manager registered action IAX1peers == Parsing '/etc/asterisk/iax1.conf': Not found (No such file or directory) Apr 2 07:45:12 ERROR[16384]:

Hi, I was able to use Unsniff to validate that the incoming 20 byte payloads of audio from the downstream IAX2 trunk was definitely G.729a whilst Asterisk 16.13.0 transcodes to G.711a unnecessarily. Media is confirmed as having been negotiated as g729 on all four streams. Nuance with this call is that it's from a WebRTC client which doesn't transmit any audio, could this be influencing

Hello all, A few years ago, I added the inalloca feature to LLVM IR so that Clang could be C++ ABI compatible with MSVC on 32-bit x86. The feature works, but there is room for improvement. I recently took the time to write up a design using token values that will hopefully be better named and easier to work with and around. For the technical details of the proposal, I've written up the RFC

I'm attempting to get two Asterisk 0.4.0 PBXes to communicate with one another using IAX/IAX2 trunks. I've managed to get a semi-functional NAT Firewall working as a PBX (with Asterisk running directly on the firewall itself), but there are issues with bind()ing to various interfaces which is causing outbound SIP issues. To get around these issues, the idea is to do something like

asterisk-users-bounces@lists.digium.com wrote: > Is there anyone else with the same problem? Yes, we've seen the same problem. We have found a work around, but I'm unable to to look into it today. -- Andreas Sikkema Rits tele.com Van Vollenhovenstraat 3 3016 BE Rotterdam t: +31 (0)10 2245544 f: +31 (0)10 2245540

On Mon, Jan 27, 2020 at 4:31 PM Eli Friedman <efriedma at quicinc.com> wrote: > I assume by “drop support”, you mean reject it in the bitcode reader/IR > parser? We can’t reasonably support a complex feature like inalloca if > nobody is testing it. If we can’t reasonably upgrade it, and we don’t think > there are any users other than clang targeting 32-bit Windows, probably

Hi, all Please help me. My platform is RedHat Linux 9.0. I have a wildcard x100p. I just installed asterisk by following step: # cd ../zaptel # make clean ; make install # cd ../libpri # make clean ; make install # cd ../asterisk # make clean ; make install # make samples When I test Asterisk typing # asterisk –vvvvc I get one error and one warning: [chan_iax.so] => (Inter Asterisk

Sorry for the delay. Arthur Eubanks has started working on the design here: https://reviews.llvm.org/D74651 I felt I should follow up here about that. On Mon, Jan 27, 2020 at 6:47 PM Eli Friedman <efriedma at quicinc.com> wrote: > It doesn’t seem like multiple call sites should be a problem if they’re > sufficiently similar? If the argument layout for each callsite is the > same,

Hi all! Am I missing some configuration or is it simply a bug: If Asterisk chan_sip is configured with bindport=5062, the port is missing on the outgoing SIP messages contact header. This resulting in in-dialog messages sent to port 5060 ... where there is no Asterisk on that host... Tried externip = 1.2.3.4:5062 with no success. Version 1.6.0.3. br Walter -------------- next part

Hello, Hope everyone is enjoying their holiday! We setup two asterisk servers (From CVS on Wednesday) and set up IAX between the two. Right now they both reside on a switch with a static 192.168.0.x IP address. The first Server is .5 and the second is .30. Our dialplan seems to be working, however on the console we get a flurry of NOTICE and WARNING messages. NOTICE[1116941120]: File

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

I constantly get the following error messages in /var/log/asterisk/messages: Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 3324 (iax_ack_registry): Received unsolicited registry ack from '192.168.0.1' Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 4181 (socket_read): Registration failure Where 192.168.0.1 is another asterisk server. Below are the local and

We have a new customer with a lot of old phones like the 9133i. They won't register, and we see some very strange behavior with them. If the SIP peer exists, they simply fail silently, with no error in the CLI or the messages log. Nothing works, but no errors. If the peer does not exist, it's clear that it's registering improperly: [2013-04-28 13:34:31] NOTICE[3058] chan_sip.c:

Hi all I been looking into the whole code strugture of chan_iax and i see there is a option to specify the refresh rate of registrations: But there is no code to actually load this from the config file thus i changed the setting in chan_so.h, and recompiled. But still my refresh rate is 60 sec. I need to get this down to 15 sec (nat /pat firewall issue) any ideas? thanks Liaan

hello, I have a test setup with 2 asterisk servers, each having a one snom 100 via sip using it. I`m experimenting on how trunking between them would work. I have them setup for RSA authentication which I plan to use in the future. So I`ve setup the keys and servers seem authenticate to each other. One is named phila and other hurricane. Here is what I see on phila: -- Registered

Hi, We have a scenario where inbound calls from an upstream provider (chan_sip) sent downstream (chan_iax2) negotiates only g729 yet RTP media contains g711. Both the upstream and downstream trunks are limited to only offering g729 whilst the initial invite from our upstream provider offers both g711 and g729. Asterisk presumably simply forwards the media from iax2 trunk encapsulation to sip

I've got a test * server (hppbx) where I install CVS-HEAD as often as possible, with my extension registered to this, talking through IAX to our production server which then channels out to the PSTN. After completing a call just now, the following appeared on the CLI of hppbx (the 90xxxxxxxxxxx is a valid number, changed to protect the guilty): == Spawn extension (from-sip,

Calling my home numbers has always worked. Till now. The Asterisk CLI show the following : [Dec 23 10:53:22] NOTICE[25159]: chan_sip.c:12640 handle_response_invite: Failed to authenticate on INVITE to '<sip:092xx90xx at 85.xx.xx.xx>;tag=as5b139383' And after restarting Asterisk, the CLI is flooded by : [Dec 23 11:11:06] WARNING[1468]: chan_sip.c:1817 __sip_xmit: sip_xmit of

Afternoon all, I'm trying to load Asterisk, however I am getting the following error: [skipping res_musiconhold.so] [chan_sip.so]May 22 18:42:24 WARNING[16384]: loader.c:240 ast_load_resource: /usr/lib/asterisk/modules/chan_sip.so: undefined symbol: ast_moh_stop May 22 18:42:24 WARNING[16384]: loader.c:421 load_modules: Loading module chan_sip.so failed! I've tried doing