similar to: Audiocodes MP-11X configuration to work with Asterisk

Hello I am going to try the new Digium Fax for Asterisk product. I'm planning to connect fax machines to Asterisk (currently 1.6.0.9) via T.38 ATAs. I'm looking at Grandstream HT502 or Linksys SPA2102 ATAs. If anyone has any experience with these devices, or other recommendations, I would be grateful if you could share your experiences. Regards Ian

We are currently moving away from a wide-spread Cisco CallManager deployment to Asterisk. For many of our small sites we have the routers configured for what Cisco calls SRST so if we have a WAN failure, the router acts as a SCCP registrar. We are converting to SIP, and from what I can tell Cisco wants a license for each router to run SRST over SIP... So my question to the group is: What are

Sir, Here is the working Audiocodes MP-11X FXO configurations to work with Asterisk. ;************** ;** Ini File ** ;************** ;Board: MP-118 FXO ;Serial Number: 905371 ;Slot Number: 1 ;Software Version: 5.00A.024 ;DSP Software Version: 204IM => 209.13 ;Board IP Address: 192.168.0.195 ;Board Subnet Mask: 255.255.255.0 ;Board Default Gateway: 192.168.0.1 ;Ram size: 32M Flash size:

Razza, I have a MP114 FXO/FXS that I have never got to work , even as an FXS, even though I have several other FXS's that work fine ie Linksys PAP2 etc.. would you put up your config? PDE

Has anyone used the AudioCodes MP-20x? http://audiocodes.com/Objects/Analog_Telephone_Adapter_Series_MP_20X.pdf Seems like a good device, but I can't seem to find anyone actually using them... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/6ca85b8c/attachment.htm

Hello list, I have a customer who is interested in standardizing on dell servers for asterisk deployments. Has anyone had success with a particular configuration? Anything specifically to watch out for? Thank you for your time, Art Arthur Miller Sr. Sales Associate VoIP Supply, LLC. 454 Sonwil Drive Buffalo, NY 14225 716-250-3871 OFFICE 716-630-1548 FAX arthur at

I've MP-114 that is working configured and working OK with my Asterisk but I just obtained MP-112 (2xFXS) and I can register OK with asterisk but I can only dial 3-digit extension. Anything longer than 3-digits is cut off, example I dial extension 1000: [Apr 29 10:03:30] NOTICE[3817][C-000000e9]: chan_sip.c:25902 handle_request_invite: Call from '54' (10.0.0.115:5060) to extension

Hello, If anyone is using a TE121B card and it works reliably (i.e. no "HDLC Bad FCS" or similar errors), could you pass along the make, model, and basic configuration of your Asterisk server? We tried upgrading our old Dell PowerEdge server to a SuperMicro system, but that didn't help. I would like a solid recommendation before I suggest another purchase. Thanks. -- Kevin

I was able to setup AudioCodes MP-114 to rote calls form FOX to Asterisk and make internal calls: Routing Tables -> Tel to IP Routing: *, *, 10.0.0.109 (my asterisk IP) But I'm not sure how to setup AuioCodes to make calls out via FXO? In extensions.conf [Globals] pstn-5665=10.0.0.157 Whenever, I try to call out I get a busy signal. -- Joseph

I have AudioCodes MP-114 and I'm trying to configure SAS (Stand Alone Survivability); when Asterisk is down the MediaPack gateway should forward the call IN/OUT through the gateway (without asterisk in the middle), but it is not working. I'm working with tech. support from the source I purchase the unit from they we are just emailing back and forth and the unit is still not working. Can

Hello, Anyone here have experience with Audiocodes MediaPack MP-108 Gateways? I would be willing to pay someone for advice and support with configuring my gateways for a telemarketing project I am starting. My experience is somewhat limited but all I want to do is make outbound calls just like I would on normal pots lines. (That's the best way to explain it) I do not need any special

Anyone using Nokia "E" Series handsets with Asterisk? I'm trying to deploy some e71's and am having an issue. I can get a single handset working, but when I try to create a SIP profile on the second phone, it won't allow me to save the profile, saying that devices in the same "realm" must have identical username and password. Anyone have a workaround for this

Greetings; We are trying to get Asterisk up and happy at our site-we tried VOIP using Sphere about a year ago, spent a *boodle* on expensive hardware and services from a local "expert", but it never was happy. I'm brand-spanking new at VOIP, and I've learned a *ton* getting Asterisk breathing in the last couple of days. I have three Polycom Soundpoint IP 500 SIP phones, which

I used to use IDEFISK, but since it was taken over/renamed into Zoiper it's been really hard work - now I'm told that they won't support my chosen distribution - Debian Etch - the current stable version of Debian I prefer. So, looking to dump Zoiper and go with something else - I want something light-weigh (So that rules out Ekiga - and Zoiper was going down the bloatware route

Hi list, I'm trying to get ready the MP-104 FXO to use qith my box, but when I send calls I hear only dial tone and after a few seconds I get busy signal. I very appreciate your advices. Command line results and SIPconfigurations follows: *CLI>* -- Executing [7991696900 at total:1] Playback("SIP/101-09dd8918", "beep") in new stack -- <SIP/101-09dd8918>

While I myself am not a MagicJack user, I'm curious as to whether anyone here has managed to heist their MagicJack account's sip credentials, and use them to terminate calls using asterisk. Apparently it's as simple as sniffing the SIP credentials. If so, said person would enjoy unlimited termination for $20 year while retaining the flexibility of setting their CallerID to a

Hi list, I have a terrible noise issue with Dell SC1430 + Digium TE110P. The digium card is not sharing interrupts with any other device, as I saw in Dell's BIOS and also with "lspci -vb" command. After changing coax wire, UTP, balum, digium card ... I have found that the problem is in Dell box, so now I'm running the same Asterisk config in other server with the same

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

I was looking at the aastra 9133i, however I was informed that this phone is no longer supported. What are good phones around the $100 - $125 price point? (Need POE) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 david at safedatausa.com

I'm running an AsteriskNow V1.7.1 with both a PSTN connection and fax machine. Both are connected to a DAHDI board. I'd like to route incoming PSTN fax calls to the extension of the fax machine and process non-fax calls through different dialplan.logic. What's the best way to go about doing this? I've looked into Fax for Asterisk, bit I'm not sure that I want it or NVFax