similar to: DTMF on iax channel is not interpreted by asterisk

Hi, I have a duplicated DTMF issue with, it appears, bridged IAX channels. I have the following setup: PRI IAX <-------->* PSTN <------->* Dialplan I've configured a number on the dialplan server to make and outbound call to the pstn. This call then comes back into the dialplan server to SayDigits(). I'm seeing that a few of my digits are being duplicated

I would like to ask, if someone observe also problem with peer qualify problems, my asterisk log is full with UNREACHABLE/REACHABLE messages, even when two asterisks are in LAN environment, please take a look into this debug, I can't find any problem with packet loss, all qualify requests are replied and acknowledged, I will submit bug report, if you will also not find any problems here...

Hi All, I'm having problem with IAX, I'm trying to connect to speex.co.il from asterisk using: register => username:password@speex.dyndns.org and I cant get it to work. Maybe someone who already got this to work will help... When dialing my speex extension I see the next output from consol: IAX2 Debugging Enabled *CLI> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno:

All, I run a bunch of (well 20+ actually) Asterisk boxes at home, work, friends and the lie with our own dialplan in the form 8EEXXXX where 'EE' is the exchange number and 'XXXX' is the extension number. This arrangement has been in for 2+ years and worked well with a central box (asterisk.thorcom.net) acting as the routing hub and SIP exchange point with various public

I'm taking inbound calls on an * server, then transferring them to a second * server where they join a MeetMe conference. If I have 'notransfer=yes' set on the first * server it works fine, but if I allow the transfer (call then shifts to be between the DID provider and the second server), the call is dropped 3-5 minutes later. There is no firewall on my end, and the two

Hi, I have two asterisk servers one is connected to the PSTN and the other one is connected to SIP users. The two servers connect with each other using IAX. When I have an incoming call from PSTN to the asterisk servers and have a forward to go back out to the PSTN the two IAX channel bridge together. Now every time I dial a DTMF digit, the asterisk is sending two DTMF digits. I enable

I downloaded iaxComm and get up my iax.conf file and the extensions.conf. Here is the out but from CLI in iax debug. What did I forget to do??? Rx-Frame Retry[No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00001ms SCall: 10489 DCall: 00000 [192.168.50.66:4569] USERNAME : 100 REFRESH : 300 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type:

For some reason, starting just today, 1 out 3 of my asterisk servers is having issues calling 1 other server. The only issue I see is that when it registers with the problem server it is using port 1027, not 4569. ie: Registered to 'Server 1', who sees us as 'Server 2':1027 Server 1 then proceeds to timeout trying to register with Server 2. The way I have each server registering

Hi all, I'm using following software and equipment and I have very strange behavior: Asterisk CVS-NHEAD-05/30/05-16:42:41 H323 gatekeeper - GnuGK 2.2.2 IAX2 client - Firefly 1.9.8 build 3945 H323 client - SJPhone Build 1.50.271d H323 gateway - Welltech Wellgate 3504A When I dial from Firefly (IAX2) -> SJPhone (H323) everything works as expected. When I dial from SJPhone (H323) ->

Hi, My termination with sixtel stopped working, is it something I did or anybody else is having the same problem. I am attaching log: *CLI> -- Executing GotoIf("SIP/300-fbe0", "1?4") in new stack -- Goto (macro-dialout-default,s,4) -- Executing GotoIf("SIP/300-fbe0", "1?6") in new stack -- Goto (macro-dialout-default,s,6) -- Executing

I'm new to this list, and I apologize if this is an already answered question, but my Google-fu was not strong enough to find the answer if it was. I'm having a problem with DTMF on incoming IAX calls. For the first few seconds of the call (between maybe 1 and 15, it varies from call to call) everything works fine. After that I continue get DTMF_E messages from the remote IAX server

Hi Guys, I have already tried this one on the developers list. I have not been successful getting much back there and I have notified them that I will post this on the users list instead. Hopefully somebody have tried something similar and can help out. I am developing AGI scripts on Asterisk and have run into some very strange behaviour and I think this is a bug, but I am not completely sure.

Hallo Did you allow udp outgoing on 4569 as well.. i found udp bit different than tcp when comming to firewalls liaan ----- Original Message ----- From: "Bartosz Wegrzyn - asterisk" <junk@lexon.ws> To: <timebandit001@gmail.com>; "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, February 21, 2005 12:29

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

Hi, My asterisk server is behind firewall and i am trying to connect to FWD. i hv configured as mentioned in this link http://www.freeworlddialup.com/advanced/iax. i am able to register my server with FWD. But when i dial 393612, i always get 'No one is available to answer this time, try again later'. I hv portforwarded tcp 4569 and 5060 from my firewall to my asterisk server. Any idea

Hi All, Sorry if this has been covered in the past; I've tried searching the archives, but haven't had any luck finding a similar problem. Basically I have problems when using IAX2 (which I now understand is just IAX). I have three IAX connections setup - VoicePulse, IAXtel, and an Asterisk IAX<->PSTN termination provider here in Sydney (ATP) If I try to use the CVS STABLE version

On the asterisk1 I got this: register => username:secret@ipaddress2 [eop] username=username secret=secret type=peer host=ipaddress1 auth=md5 on the second box I got this this host is ipaddress2 [incommingiax2] username=username type=user secret=secret host=dynamic context=from-internal-custom auth=md5 on first host 1 am getting: Jun 22 14:42:10 NOTICE[2398]: chan_iax2.c:7411

Hi My head hurts... Can anyone help out here, my remote IAX can see my local IAX and visa versa, conversation starts, I can dial my remote (POTS) landline number, remote end answers, trys to route to local iax2, I see it start the conversation here, the extension (SIP) rings once and then it dies... Both ends are defined with accept IPADDRESS to keep it in the family and simple.. Debug info

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call