similar to: Codec negotiation for Thomson ST2030 and g729

Hello, After reading all the docs and going through the menus, I still can't find the voicemail access button or menu sequence on the ST2030 (http://www.voip-info.org/wiki/view/Thomson+ST2030) Also I can't get phone provisionning through tftp to work. Configuration files are loaded but the phone seems to ignore them. Any idea?

hi there, I saw a page on voip-info about the thomson ST2030 phone. There is not so much info on there, that's why I would like to raise a question here. Has anyone got hands-on experience with this phone? (with or without extension module) I am interested if it can be used (as SIP phone) in a good way with asterisk. (also, do all the functions behave like they should; like Supervision

Hello, I'm trying to upgrade a Thomson ST2030 phone froms its default 1.42 firmware to the latest version (1.56) through tftp. The phone loads the .inf file, then the correct firmware file (as stated in the ST2030S.inf), then it reboots and loops doing these same things again and again. The firmware version on the phone stays at 1.42. Is there a special intermediate firmware version to

Hi, i'm new in asterisk programming. Maybe my question was posted thousand times but i found nothing using google. I'm looking for a method to limit the total simultaneous calls (inbound and outbound) that pass from internal phones to 2 SIP providers. I found the calllimit option but it works only on a per-channel basis. Instead i want limit the total amount of calls, abstracting from

Hi all, on my debian box i configured chan_oss to work with /dev/audio device. CLI console command and Dial(CONSOLE/dsp) work perfectly but i notice 2 problems: 1. audio is very low in volume, even if i set 100 the mixer volume (via cmd line setmixer utility) 2. the sound is very crappy: the voice is "vibrant", words sounds like 'ttthhhiiisss iiisss aaa ttteeessstt". Seems

Am 07.01.2016 um 10:55 schrieb Frank: > On Wed, 2016-01-06 at 17:03 +0100, Juergen Sauer wrote: Thx, 4answer. :) >> with in my sip.conf, I have got for this hardphone: >> [...] >> [hard1] >> username=hard1 >> secret=correct-and-three-times-checked-4-digit-pin > > In most cases, there is no need to set the "username=" option. The

Hello. Once again, I came up with a problem for which I can't seem to find a solution. I'm not able to make BLF work with Thomson ST2030 phones and Asterisk (1.2.13). I've set up hints in dialplan, as well as Subscibe keys on the phone. The LED status gets updated according to the associated line status. However, when a phone is ringing, If I try to pickup the call by pressing the

Hello, I am looking for a replacement for my Thomson ST2030SIP. My specifications are as follows : - 2 lines. - 6 BLF keys. - PoE. Can you give me a return on the models you use ? Thanks. Sil

Hello list, I'm observing what I believe to be inconsistent behaviour regarding "Newstate" AMI events for the "Ringing" state. As such I come to you asking for experience or advice: am I wrong or should I file a bug ? I present you a short introduction which I feel is relevant; however, if you want to go straight to my technical question, please scroll

Hi all, I am looking for phones witch support POE, with a good relation between quality and price to work with asterisk. I just see the Thompson st2030 and the Linksys SPA 922 an SPA 942. Witch of this phones or another ones gave you the best results in a productivity enviroment? Thanks in advance. VoipCrazy. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I've got strange problems trying to run asterisk with MGCP ip phones (Thomson ST2030). Situation: "user A" <----- pstn -------> ASTERISK <----- mgcp ------> "user B" "User A", connected behind a PSTN, tries to call "User B". After dialing "User B"'s number, call comes to ASTERISK, ASTERISK contacts

Hi! I wish you all e Happy New Year first! Allthough, I'm relative new to Asterisk, I got our server up and Running, Softphones, ISDN, and a brand new Snom 821 are working flawlessly. :) Platform is Debian 8/Asterisk Packages (11) from Debian Repo. But I am running into problems setting up 2 older Hardphones, Thomson 2030S. :( with in my sip.conf, I have got for this hardphone: [...]

Hi, Is anyone aware of SIP Diversion header ? It seems currently supported by Comverse (formely NetCentrex) softswitch and some hardphones (Thomson ST2030). An old draft (draft-levy-sip-diversion-08.txt) mentions this header. ha I'm wondering if this could be used -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I'm using Asterisk 1.6.2.0 and I like to use escape characters with SendText, because I can just delete the message from my phone (Thomson Speedtouch ST2030) display by sending a return-char (\n). But \n is not escaped: I tried already: exten => 222, n, SendText(\n) exten => 222, n, SendText("\n") exten => 222, n, SendText('\n') exten => 222, n,

Ishfaq Malik <ish at pack-net.co.uk> schrieb: > Do you have a link to the user guide for your exact phone model? Unfortunately not... I have a Thomson ST2022, but I can just find in Internet manual for the ST2030... Regards Luca Bertoncello (lucabert at lucabert.de)

We are running Dovecot 1.0-rc27 and have run across what seems to be a fatal error (SIGSEGV) in the past few days (4 times total in past 6 days). It appears to have been 5 separate users, 5 separate remote IP addresses. Two of these have this format: Mar 26 15:13:10 myhostname dovecot: imap-login: Authenticate PLAIN failed: Don't send unrequested data: user=<rmtuser>, method=PLAIN,

We're having a horrid problem with our asterisk setup. Sometimes calls just go dead - we can't hear what the other end is saying. (I think they can't hear us either). The call doesn't hang up until one of the callers gets bored. Internaly we use Thomson ST2030 SIP phones. Externaly we have 3 ISDN BRI lines (6 channels total), connected to an Eicon Diver server card (4BRI).

Hi list! Finally I got my Asterisk works with my two phones... It was a problem on my Firewall (for the phone of my wife) and on my Dialplan (for forwarding calls). Now all works as expected, at least in the simulation I did with AsteriskNOW. Hopefully it will work later, when Deutsche Telekom changes my ISDN to VoIP... Well, now I have some time to spend with "fooling"... My phone

We are looking to deploy asterisk at one of our locations that will have about 50 phones. I have been buying different phones to test there quality and feature set. So far we have a Grandstream 2000 Grandstream HandyTone 488 Cisco 7912 Polycom SoundPoint IP And we are looking at getting a Linksys SPA-942 Anyone have a favorite? -------------- next part --------------

Hi all, i'm trying from several days to setup a SLA on my machine with some THOMSON 2030. My goal is to bind every F key to an extension (NOT a trunk). So, F1 = 201, F2 = 202, F3 = 203, and so on... I'm googled thousand of pages and many more confusing concepts are in my mind. My server uses extensions with numbering 2XX placed in context 'phones'. I set yet in sip.conf: