similar to: externip not working...

I have a big headache. I have an Asterisk server connected to an Avaya PBX. Everything is working between those two. The problem is that I have 45 PAP2T adapters and 45 SPA3102 adapters that connect via the Internet to the Asterisk server through a Fortinet firewall. When calling from a PAP2T I get one way audio, the remote site can hear me but I cannot hear them. If I do an "rtp

I have a customer with a Fortinet Firewall that is having stability issues with Asterisk and SIP endpoints (PAP2T) outside his network. The first issue I see is that Asterisk sees all phones as the IP address of the Fortinet. Since the parameter "localnet" defines the local network and that address falls in that range, how will Asterisk treat the endpoints? I have

I was having problems getting a Linksys PAP2T-NA to work with Pitney Bowes mailing station so it could use its modem to dial home and download postage/software updates. After scowering the web, I couldn't seem to find a definite how to article on what settings were needed. I finally came up some settings by combining the information from various places around the 'net. I have typed out

Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I

Hi All, Is it possible to specify more than 1 localnet? I know this is an odd question. I have a customer that has multiple sites linked by VPN. Main range is 192.168.33.0/24 and a remote site is 10.1.1.0/24 We want to allow some access to the public IP address at the main site. For this to work I need to use the externip and localnet directive. If I do this it rewrites the SDP with the

I am having trouble setting this system up and wonder if some one help me. Does anyone know what is missing if anything to get 2 phones on my asterisk home server to be able to call each other. I have a WRT54GS running OpenWRT/asterisk connected to a PAP2 with 2 extensions 5060/5061, this is on the lan side of my gateway/router WRT54G 192.168.1.1 BusyBox v1.00 (2006.11.07-01:40+0000)

have adaptors compatible with Asterisk, but explicitly say in the product titles that they're unlocked, which I think is the key. On Thu, Dec 17, 2009 at 4:16 AM, Brian Cline <Brian at nw.brian.fm> wrote: > Hello, > > I'm running Asterisk v1.6.1.11 internally with a few Linksys SIP > phones and will be receiving a machine containing a Dialogic card > for a

Hi people! I am not getting smart getting asterisk 1.6 behind a NAT to run. 1. I enabled IP forwarding on debian linux 2. told asterisk in "general" that he is behind NAT and mentioned him his external static IP Adress as well his domain in the outside world. If a client who is connected with a DSL modem calls me, a grandstream module in the LAN behind the router, in the same network

how do i troubleshoot no ring tone. It was working and all i added was the lines below now it doesn't ring. Edit sip_nat.conf for proper NAT: localnet=192.168.1.0/255.255.255.0 externhost=pbx.DOMAIN.com (Set your external hostname name here) externrefresh=10 fromdomain=DOMAIN.com (Set your external domain name here) nat=yes qualify=yes canreinvite=no Add extra codecs to

Hi, We have some Asterisk servers that we are moving behind a NAT to preserve public addresses and make room for growth. This is Asterisk 1.4 NAT works very good with the externip/localnet-setting when we are connected directly to our teleco. But when I try to use NAT and put them behind our Kamailio something interesting happens: The media-address in the SDP is the internal ip and not the

ekiga registration fails. I've set nat = yes ( also blank ) and i've set externip. Anybody have a sip.conf that works? Here's the sip debug: Reliably Transmitting (NAT) to 86.64.162.35:5060: REGISTER sip:ekiga.net SIP/2.0 Via: SIP/2.0/UDP 10.10.11.180:5060;branch=z9hG4bK17818198;rport Max-Forwards: 70 From: <sip:test at ekiga.net>;tag=as64618445 To: <sip:test at

Hi out there, I think i've everything set up properly, outbound calls are working fine, but at incoming calls I can't hear anything, but the other one is able to hear me perfectly. I'm using an asterisk 1.6.1.10 in my internal network in a NAT, connected to my sip-provider using a trunk. Firewall settings on the router are: forward UDP port 5060,5004,10000-20000 to asterisk server

Here is Mexico the phone company uses a DSL router from 2Wire which in my opinion is quite bad. I am having problems getting PAP2T adapters connected to Asterisk using these routers. They connect fine but after about 5 minutes I get a message on the Asterisk console that the ATA is unreachable. So far the only way I have found for the ATA to stay connected more than five minutes is to put it in

I have a weird problem with a client. I recently upgraded to Asterisk 1.4.22 and Zaptel 1.4.12.1 on their server and now there is a problem when a fax call is received. Basically when faxdetect=incoming is set in zapata.conf the call comes in and the fax extension dials a Linksys PAP2T where a fax machine is connected. The fax answers and almos immediately it hangs up and I get this: --

Hello. I have an Asterisk server (ViciDialNow) set up behind NAT. I can manage to make outbound calls, but the communication drops off after 30 seconds or so. I'd really appreciate having some assistance from the mailing list on this issue. So, I'm having an Asterisk server behind a firewall and Zoiper softphones on SIP connecting to Asterisk on the same local area network. The

Hello, I'm running Asterisk v1.6.1.11 internally with a few Linksys SIP phones and will be receiving a machine containing a Dialogic card for a development project (in a nutshell, the card receives analog calls while the accompanying software handles automated prompts, etc). The Dialogic card is not SIP-based but will work with an analog line, so I'm looking into adapters that act

My Asterisk server is behind a NAT and I have set: ---------------------------------------------------------------------------- externhost="my.server.address" externrefresh=180 localnet=192.168.0.0/255.255.0.0 localnet=10.0.0.0/255.0.0.0 localnet=172.16.0.0/12 nat=yes --------------------------------------------------------------------------- in [general] section of sip.conf. I can

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm trying to test with a friend who has an Asterisk in his office with the Asterisk which I have in my house. Then I have an extension that he is trying to register remotely. Trying with the Twinkle client, I see that it is registered: - --------------------------------------------------------------------------- 400/400

Hi all! Do anybody has a full working environment using externip on an asterisk box behind a nat? I tried with two diferent boxes (Elastix-1.4.24 e Trixbox-1.4.22-3)and the asterisk do not replace neither contact, neither sdp headers info with the externip informed on sip.conf general parameters. I used these two statements: externip=XXX.XXX.XXX.XXX localnet=192.168.200.0/255.255.255.0 Do

Hi all, I've tried search this problem on the list... no luck... The case is: without externip/localnet config on sip.conf [general] my SIP trunk works, but with no audio NAT problem (asterisk sends the private 192 address to the outside...) when I configure externip/localnet correctly my SIP trunk simply disappear! Checking the signalling with tcpdump shows me that Im sending the