similar to: SLA in 1.4.18: i'm going crazy.

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

Hi all, on my debian box i configured chan_oss to work with /dev/audio device. CLI console command and Dial(CONSOLE/dsp) work perfectly but i notice 2 problems: 1. audio is very low in volume, even if i set 100 the mixer volume (via cmd line setmixer utility) 2. the sound is very crappy: the voice is "vibrant", words sounds like 'ttthhhiiisss iiisss aaa ttteeessstt". Seems

Hi, i'm new in asterisk programming. Maybe my question was posted thousand times but i found nothing using google. I'm looking for a method to limit the total simultaneous calls (inbound and outbound) that pass from internal phones to 2 SIP providers. I found the calllimit option but it works only on a per-channel basis. Instead i want limit the total amount of calls, abstracting from

Hi, I'm having a problem getting a snom 300 to work with BLF (extension 222). I've set it to watch extension 220 in the function key config pages as per the wiki (BLF, <sip:220 at server.com>) but I can't get the light to come on when 220 is ringing. The SIP trace page doesn't show anything coming from my PBX when 220 is ringing or in use. Any help much appreciated as this

Hi, I'm wondering - why SIP device state doesn't get updated to anything else, except Not In Use. For queue call (with Local channel) i get: app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use) app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use) app_queue.c: The device state of this queue member, Agent/21168, is still 'Not in

-------------------------------------------------------------------------------------------------------- dev*CLI> zap show status Description Alarms IRQ bpviol CRC4 Wildcard TDM400P REV I Board 1 OK 0 0 0 dev*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo

I have 4 asterisk servers. They all have local phones on their local network they manage for SIP based conversations. We then have IAX between them all for inter-asterisk connections. This setup has worked well for nearly 2 years now, minor problems here and there but overall very nice. Recently we acquired some Polycom video conference units. I was able to setup our main server to host all

Asterisk Version: 1.8.1.1 Problem: Multiple Parking Lots Issue: Not redirecting to the right parking lot. Always uses the first parking lot from "parkedcalls show" or "features show" Asterisk Working Version: 1.6.1 Steps Taken: In features.conf added: [parkinglot_test] context => parkedcalls-test parkext => 700 parkpos => 701-710 parkingtime => 120 findslot

Group I'm having trouble getting hints to work correctly using SVN-branch-1.4-r59289 I have hints working on several other systems but I must be missing something this time around. VoIPGW*CLI> show hints -= Registered Asterisk Dial Plan Hints =- 30@default : State:Unavailable Watchers 3 29@default :

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Hello everyone, I'm getting DIALSTATUS=CHANUNAVAIL when a call is trying to get one of my queue interfaces, despite the fact it is free at that time, can you give help? 1. I see many sip channels from that extension: [root at mysweetpbx]# asterisk -rx "*sip show channels*" |grep 648 Peer User/ANR Call ID Seq (Tx/Rx) Format Hold

" Hello, I have been trying to get my Grandstream GXP2000 phones to stop showing ringing state on monitored extensions. But no matter where I put notifyringing=no asterisk still sends the ringing state to the phones. Is this a bug I should report or is there another way around it. Here is how i have my subscriptions setup: extensions.conf [demo] exten => 6100,hint,SIP/100 exten =>

Hello all, I know it was on the list before but i have some questions about the Kirk IP600v3, the requested configuration files were send private i guess Does anybody have the correct SIP settings for handsets connected to the Kirk. IP600v3 I am particulair intrested in settings regarding: -Voice Mailbox -Call waiting -DTMF settings for e.g. parking an extension with asterisk functionality

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

Hello Asterisk-Community, I'm having an error with my BLF configuration on my asterisk...i've configured the sip peer like this: [8250] type=friend callerid=Extensi?n 8250 <8250> canreinvite=no context=pbx9 dtmfmode=rfc2833 host=dynamic insecure=no language=es nat=yes pickupgroup= callgroup= qualify=2000 secret=cyx2mo type=friend username=8250 subscribecontext=pbx9 call-limit=100

Hello Asterisk-Community, I'm having an error with my BLF configuration on my asterisk...i've configured the sip peer like this: [8250] type=friend callerid=Extensi?n 8250 <8250> canreinvite=no context=pbx9 dtmfmode=rfc2833 host=dynamic insecure=no language=es nat=yes pickupgroup= callgroup= qualify=2000 secret=cyx2mo type=friend username=8250 subscribecontext=pbx9 call-limit=100

I configured my sla.conf to use with a Polycom phone. I have no idea if I did it right, however, none of the console "sla" commands exist. Do I have to something special to compile in this support, or should it just work out of the box? ~jay

Greetings, Back in September someone asked about documentation for the new SLA feature in 1.4, however they received no replies. I thought I might ask the same question now in December. Apart from sla.conf.sample and a few comments in app_meetme.c I have been unable to find useful documentation. Is anyone using this feature right now? Is there a helpful source for information this highly

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the