similar to: Problem with transfer (and asterisk -r)

Hello all. Dialing with tT options and function Read (to prompt number) has a trouble for me. Can I temporarily features off during Read? features.conf: [featuremap] blindxfer => ## ; Blind transfer (default is #) atxfer => ** ; Attended transfer I try: exten => s,n,Set(LOCAL(tmp_atxfer)=${FEATUREMAP(atxfer)}) exten =>

Hi Is there a way to disable blind and attended transfer during a call. I am trying this configuration but unfortunately with no luck: - in features.conf [applicationmap] disabletransfer => 9*9,self,GoSub(disabletransfer,s,1) - in extensions.conf [incoming] exten => 99,1,Set(__DYNAMIC_FEATURES=disabletransfer) exten => 99,n,Dial(Sip/alice,120,tT) exten => 99,n,Hangup()

Hi folks, I was using the following featuremap: blindxfer => *1 disconnect => *9 atxfer => *2 parkcall => *7 automixmon => *0 and everything worked. Then the need arouse to use some features like automixmon during a conference, but MeetMet has the * key bound to the (admin) menu. Thus, in order to enable features like automon and transfers even during a conference, I

Hi. rsync 3.0.8 FreeBSD RELENG_4 i386. rsync -Haxi --delete /.../ /.../ The first pathspec above (residing on zz, a full filesystem) is: /vvvv/wwww/xxxx/zz/ The second pathspec above (residing on yyy, an empty filesystem) is: /vvvv/wwww/xxxx/yyy/zz/ It's obviously a 'copy everything over' operation. I've had to obfuscate the pathnames, however the exact pathlength throughout

Hello. I have a strange problem with the MeetMe application. Configured is a misdn msn to go into a preconfigured MeetMe room. exten => 12,1,MeetMe(1234,pIM) The first caller gets the prompt to enter the pin and then gets connected to the MeetMe room. The second caller gets also the prompt but after entering the right key he hears a dialtone followed by the message: The number you have

I'm wondering whether there's a problem with the blindxfer and atxfer commands. I was using Asterisk STABLE and pressing the # key to transfer calls worked fine, except of course when you called up FedEx and they asked "Enter the number of packages, followed by the Pound key". I found on the wiki (http://www.voip-info.org/tiki-index.php?page=Asterisk+config+features.conf) that

Hi, I am trying to use the attended transfer. So I put this in my feature.conf: [general] [featuremap] atxfer => *0 blindxfer => #0 I completly restart asterik, and not just make a RELOAD. But during a call, when I press # it runs a blind transfer and if I press * I am disconnected. I am using the CVS version of * get as explain here

On 12/21/2014 04:42 AM, Patrick Beaumont wrote: > Have you enabled DTMF logging and seen the DTMF codes being recognised by > Asterisk? I had a bunch of soft phones that I had to change to using ?sip > info? for the DTMF signalling as the RFC signalling was not always being > recognised. This would cause transfers to appear as if the user had not > dialled any digits. > > >

I've got a confbridge set up which works if dialed locally: -- Executing [266 at internal:1] Answer("DAHDI/1-1", "") in new stack -- Executing [266 at internal:2] SendDTMF("DAHDI/1-1", "1") in new stack -- Executing [266 at internal:3] ConfBridge("DAHDI/1-1", "1") in new stack -- <DAHDI/1-1> Playing

Hi List. I have a small problem in using the transfer key transfer of IP Phone in Asterisk 1.6, I think I spend some detail in the configuration but can not find. What happens is, when I do a transfer using the Transfer button, the phone, does not play the music on hold, which is waiting on the phone is silent, and I have the same settings on a 1.4 server, and the music plays correctly when

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm trying to doing a transfer from an analog extension to a SIP extension but until the moment I was not successful. I was testing both the recall key and uncomment the following lines in the features.conf file: blindxfer => #1 atxfer => *2 verifying previously that the extension uses the arguments "tT" with the Dial

On Wed, Dec 17, 2014 at 1:09 PM, sean darcy <seandarcy2 at gmail.com> wrote: > I've got a confbridge set up which works if dialed locally: > > -- Executing [266 at internal:1] Answer("DAHDI/1-1", "") in new stack > -- Executing [266 at internal:2] SendDTMF("DAHDI/1-1", "1") in new stack > -- Executing [266 at internal:3]

On 12/20/2014 03:22 PM, sean darcy wrote: > On 12/19/2014 09:42 AM, Rusty Newton wrote: >> On Wed, Dec 17, 2014 at 1:09 PM, sean darcy <seandarcy2 at gmail.com> wrote: >>> I've got a confbridge set up which works if dialed locally: >>> >>> -- Executing [266 at internal:1] Answer("DAHDI/1-1", "") in new stack >>> --

i have TB instaled and i cant get call pickup when another phone rings i tried ** , *8 , *8# , **+ext but nothing seems to be ok.on extention menu i put call pickup=1 and call group=1 but nothing look at my features.conf; ; Sample Parking configuration ; [general] ; do not manually enter parkinglot config information, use the parkinglot module ; ; the parking_additional.inc file is

I have a group of local users. They want to participate on a conference call to a PSTN line in USA. To connect they need to enter a code there as well. I want to use a local conference room, where LAN users and local users can call in. The conference room should be connected to the conference abroad. features.conf has: [featuremap] blindxfer => #1 ; Blind transfer ;disconnect

Hi all, I am having a couple of problems with features.conf I was hoping to get some help with. #1. If an outside caller is parked, when retrieved, that caller will now have the ability to transfer. This only happens when they are put in call parking and then retrieved. #2. I cannot get any other keys to register for features. For instance, I tried assigned blindxfer => *1, but both

Hi guys, I'm trying to get blind transfer to work and automatically transfer call to another number on key sequence press. Extensions.conf_snippet [from-pstn] exten => _0399377744,1,Set(__DYNAMIC_FEATURES=blindxfer) exten => _0399377744,n,Set(__GOTO_ON_BLINDXFR=to-pstn ^0388924326^1) exten => _0399377744,n,dial(SIP/0399377704 at c5400-02,T) [to-pstn] Exten =>

Hello all, I am trying to complete my dial plan and have come up with an interesting situation. My configuration is set up with 12 xlite SIP clients on SUSE linux workstation. They are calling out via 10 analog lines, TE110P->rhino 24 fxo. It all works and dials out great ... but ... this unit was brought in to handle the "global" office. So the help desk support on the Suse

Hey folks, I can park a call with #70 after enabling that feature in features.conf. However, once I retrieve the call from the parking lot, #70 cannot be used to park it again. Worse yet, none of the keys defined in the featuremap work anymore, include blindxfer or automon. Any ideas what may be the problem? -- martin | http://madduck.net/ | http://two.sentenc.es/ "man sagt nicht

Hi, Am running 1.4.18 at the moment, and am trying to implement inline blind transfer. I have : [featuremap] blindxfer => *6 ; Blind transfer in features.conf And in extensions .conf under [globals] : DYNAMIC_FEATURES=automon#blindxfr So what am I missing ?? Have read through http://www.voip-info.org/wiki/view/Asterisk+config+features.conf Thanks,