similar to: rxfax issue

is /usr/local/sbin/mailfax flagged to 755? ________________________________ Von: asterisk-users-bounces@lists.digium.com im Auftrag von Rob Danz Gesendet: Mi 13.07.2005 17:17 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] SpanDSP rxfax, no tiff. Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

Hello All, I have downloaded and installed spandsp and downloaded rxfax, etc and rebuilt asterisk with app_rxfax. I have added the following to my extensions.conf: [macro-faxreceive] ; ${ARG1} - sendto e-mail exten => s,1,Wait(2) exten => s,2,Answer exten => s,3,SetVar(FAXFILE=/var/spool/asterisk-fax/fax-${MACRO_EXTEN}-${TIMESTAMP}) exten => s,4,SetVar(EMAILADDR=${ARG1}) exten =>

Hi, I am using spandsp-0.0.4, tiff-3.8.2, and agx-ags-addon with Asterisk 1.4.18. Everytime rxfax executes, Asterisk crashes: -- Executing [fax at phones:1] Set("Zap/2-1", "FAXFILE=/var/spool/asterisk-fax/1207322398.0.tif") in new stack -- Executing [fax at phones:2] RxFAX("Zap/2-1", "/var/spool/asterisk-fax/1207322398.0.tif") in new st ack [Apr 4

How should be the macro rewritten? [macro-faxreceive] exten => s,1,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif) exten => s,2,DBGet(EMAILADDR=extensionemail/${MACRO_EXTEN}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,Set(EMAILADDR=ronald@elmit.com) exten => s,104,Goto(3) ... [Jan 23 10:43:38] -- Executing Macro("Zap/3-1", "faxreceive") in new

Hello. Im trying to get Fax-to-email working. I've installed Rx and txfax, spanDSP and every package needed. I've done everything on this page (altough, some bash-scripting problems): http://www.voip-info.org/tiki-index.php?page=Asterisk+Fax+to+email anyway, when i try to send an fax, i get theese messages in asterisk: -- Executing Goto("SIP/5060-08148520",

Well, my faxes passes through asterisk successfully, however I still have some problems about fax reception by rxfax. The softfax answers, and negotiates transmission, however then as some stage of communiation something is wrong. But I have nothing more but this log: Jun 2 00:10:21 DEBUG[16900]: chan_zap.c:4242 zt_read: DTMF digit: * on Zap/10-1 Jun 2 00:10:22 DEBUG[16900]: chan_zap.c:4242

Hello All, I am looking to get asterisk to receive faxes but I really don't know where to go from here, any help pointing me in the right direction would be great. What I would really like is for this second line to answer faxes, but if a user typing in an extension it goes to that extension but I need to get the fax working first. Error I get when I turn on Fax conf... pbx.c:1945

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091111/2b828eff/attachment.htm -------------- next part -------------- Hello. I am trying to execute an fax reception script and i am getting the following: [Nov 11 08:40:52] WARNING[12800]: app_system.c:88 system_exec_helper: Unable to execute '/var/lib/asterisk/scripts/mailfax ""

I have managed to get spandsp working, and if I dial a specific extension I can receive faxes. WhooHoo. However, I was wanting to use the "fax detect" option in order to allow individuals to receive faxes, but can't get that to work. Given the following extensions (mainly copied from examples on the wiki), why is the call simply passed onto the sip device rather than being

Hello! I'm try to implement a fax service using spandsp (0.0.2-pre10) and NVFaxDetect (since I'm using a SIP channel). I receive the call from pstn on my SIP/PSTN gateway (welltech 3804). The fax is detected by NVFaxDetect and than a macro is started. The welltech use Alaw codec. The problem is the following: NOTICE[22270]: Dropping incompatible voice frame on

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

Hello: I have been using the asterisk system now for almost 5 months. I'm very happy with it's performance, however I have been using the RXFAX on and off for the last month or so. I gave up after a while and just had it route to my analog fax machine in the fax context. However, I have always had the implementation that it would go to a macro.. macro-faxreceive, and to the rxfax of the

Maybe I over-complicated my question with the mailfax part. If I leave the mailfax step out entirely, then there should be a .tif file, right? But there's not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Thanks for the responses so far. /Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

Hello All, I am looking to receive faxes via my inbound SIP, but I can get it to answer the fax. Now I did test the SIP inbound to a phone and that does work it is just the fax part I am having issues with any help would be great. This is the error I am getting Mar 11 15:08:49 NOTICE[14322]: rtp.c:430 ast_rtp_read: RTP: Received packet with bad UDP checksum Mar 11 15:08:49 WARNING[14322]:

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * again. This all worked out fine. When integrating the RxFax into my dialplan the

Hi All I am using asterisk version cvs-v1-0-04/15/05 and spandsp 0.0.2pre18. I can receive and then email most faxes without issues, but recently I am having this issue when receiving faxes from a particular person. I can receive the faxes ok, but there are alot of bad rows as indicated by my logs below and the fax is not readable. I have included a good (from another user) and a bad fax. We

Hello, I think you should handle the fax in the h (for Hangup) extension (which is, after your fax was received), instead of using the priorities following the fax reception (as in your example). Have a look at the different examples in the wiki, like http://www.voip-info.org/wiki-Asterisk+fax: [fax] exten => 666,1,Macro(faxreceive) exten => h,1,system(/usr/sbin/mailfax ${FAXFILE}

Hi, all. I've got app_rxfax going and nicely receiving a fax, which I then throw to a script, and have it convert it to a PDF and mail it. Works great... a lot of the time. But a fair bit of the time, rxfax throws errors, and extensions.conf seems never to invoke my script. Here are the pertinent lines: exten => _6403,n,rxfax(${FAXFILE}) exten =>