similar to: SPA400 vs Rhino/Digium card

Hi all, I have asterisk connected to my voice application server. Asterisk is connected and registering to a linksys spa400 box. I am running an application on a perticular extention (141). Here is a snip from my extensions.conf... exten => spa400,s,MyApp(/etc/asterisk/MyAppConfig.conf) exten => spa400,s+1,Hangup when an incoming call comes,It is accepted properly,And the application

hello guys... well as my first post i want to say when i try to install rhino it says: ...The installer requires Windows installer 3.0 or newer... so when i try to download that (as a last resort [Wink] ) it fails... so if anyone can help thats great but if not... well this thread is mainly an error report... Thanks! Trey.

Had a fairly horrible lightning storm night before last, and four of eight ports in a 1.4.20 machine stopped answering. In the CLI: budsw*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo default en default 1 from-zaptel en default 2 from-zaptel en default

Hi Folks, Struggling with a new * installation with 2 Rhino R2T1 cards. For some reason, the system is locking up tight when you run ztcfg to configure the card(s). Configuration is asterisk 1.2.14, zaptel 1.2.12, and rhino's 1.05rxt1 drivers. The cards seem to load fine with a "modprobe rxt1", but once you run "ztcfg -vvv", the system will lock up within a few seconds, no

Hey Aaron, I''m just thinking out loud here, but have you considered the possibility of using the Rhino [1] library to implement javascript support in mechanize? It''d create a jruby dependency for that feature, but still. Just thought I''d bring it up while I was thinking about it. -Mat [1] http://www.mozilla.org/rhino/

I am testing analog phone and fax machine plugged into Rhino Channel Bank which is connected to TE412P card. This site is in China. I am running RHEL 5, Asterisk 1.4.21.2, Zaptel 1.4.11 and libpri 1.4.4 I ran into a problem which is analog phone can hear dial tone and can make outgoing calls. Another phone (ether internal or external) can call the analog phone ***but the phone does not

The if() statement always evaluated to true. Detected by "cppcheck", not tested on real hardware. Signed-off-by: Thomas Jarosch <thomas.jarosch at intra2net.com> --- drivers/rhino.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/rhino.c b/drivers/rhino.c index ca66169..e478bcb 100644 --- a/drivers/rhino.c +++ b/drivers/rhino.c @@ -187,7 +187,7

Hello there, Offending source code is ????? if(? ( BattVoltage> 129 ) || ( BattVoltage < 144 ) ) Maybe swap || for && would be better. This problem I found by using cppcheck. It said [rhino.c:190]: (warning) Logical disjunction always evaluates to true: BattVoltage> 129 || BattVoltage < 144. Regards David Binderman

Anyone have any experience with the Rhino T1 channel bank? It looks very cost effective at around $1300 for 24 lines but I haven't seen it mentioned on the Asterisk list yet.

Anyone ever experience noise instead of a dial tone. We are using a Digium TE410P and 2 units of Rhino FXO & FXS Channel Bank. Everything works well when they are freshly turned on or rebooted, but after a while there's only noise can be heard instead of dial tone. Does this have anything to do with the timing configuration? Where is this time is generated from, is it from the TE410P card?

Anyone know if Rhino is planning on supporting zaptel 1.4 anytime soon? ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further

I would like to have your comments regarding: 1) drivers/rhino.c ------------------ The following patch addresses some problems in drivers/rhino.c. Or that is what I think. I don't use this hardware. The patch: 1. Eliminates some usefulness definitions. 2. It removes code that evaluate the time. I can't see how the code actually does useful work. 3. The

FYI Arnaud ---------- Forwarded message ---------- From: Silvino Benevides Magalhaes <sbm2yk at gmail.com> Date: 2009/10/14 Subject: Re: about solis and rhino To: Arnaud Quette <aquette.dev at gmail.com> Hi Arnaud, I was on holiday, so I only answer you now. About rhino, I received a document contains the its protocol and a little box with rhino firmware to testing driver

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. When I pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if I dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Has anyone had any success with the Rhino CB-24? I can't get mine to work, I tried all the obvious settings. The cb-24 gets stuck at init ESF framing, as if it's not seeing the t1 card at all. It does get a t1 carrier (detecting voltage??) Help! Thanks.. Everything appears to look good on the server, I did: [zaptel.conf] span=1,0,0,esf,b8zs fxogs=1-24 [zapata.conf] signalling=fxo_gs

Hello list, I have recently deployed Asterisk as the phone system for my office. So far, everything has been going really well, except for one little thorn in my side. I have a set of 6 analog lines that are connected to a TE411P via a Rhino FXO Channel bank. If I call the analog number, Asterisk answers the call, and routes it appropriately. The problem is, when I hangup, Asterisk never

Just saw these new Asterisk compatible cards at Rhino's homepage. Anyone has experience with these babes? http://www.rhinoequipment.com/index.html http://www.rhinoequipment.com/t1card.html The 4-port FXO looks interesting. Looks like a very clean design. Leo

Hi all, I'm trying to insert a Rhino Ceros box equipped with a Rhino R2T1 dual-T1 card and running the latest version of Trixbox (2.4.2) between the central office and a Nortel Option 11. The switch at the CO is a DMS100. Basically, I'm taking the T1, connecting it to port 0 on the R2T1 card, and then connecting port 1 to the Nortel. (Actually a CSU and then the Nortel) We're running

Hi, Does anyone know whether faxes work good when they're connectected to a channelbank ? regards, Leon

I am forklifting a Merridian option 51c with 112 Nortel Digital Handsets and 400 analog units. For the analog units I have quotes for 9 ADIT 600 48 port fxs units and 17 Rhino 24 port FXS channel banks. I have used neither. Which is the best choice? The price difference is not that great. I am looking at Citelinks 24 port Handset Gateway for the Nortel Digital units. (Any other suggestions