similar to: Got SIP response 406 "Not Acceptable"

Someone have info about install an AVM fritz into FC3 ? I'm getting problems with kernelcapi, after succesfully installed the fcpci support. Thanks -- Adri? Vidal adriavidal@gmail.com Mail is better with 1Gmail

I have a E1 conected to asterisk all zap channels are ok, but when calls come into Asterisk caller don't hear none ring, the call goes straight into the menu, how can i simulate 2 or 3 rings? here it is my conf. exten => s,1,Answer exten => s,2,Wait,2 exten => s,3,NoOp(${CALLERID}) exten => s,4,ResponseTimeout,45 exten => s,5,DigitTimeout,3 exten =>

Someone can confirm the new release is out? Haven's seen any post about it!!!!! -- Adri? Vidal adriavidal@gmail.com

Somone in europe have had succes getting Callir ID showed on a phone screen conected to an Handytone 286 ? Adri? Vidal -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 235 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041124/e5514052/attachment.bin

Hi Everyone, I am running DD-WRT on a router that feeds about 30 Aastra 6753i. The phones occasionally go into "No Service" mode. The POE switch doesn't seem to be the problem as it's tested fine. I think the router sometimes gives up and comes back quickly. Or something of that nature. However, the connections are maintained if a call is going on because there are peer to peer

Hello! I'm having a bit of an issue with one of my installations that I cannot figure out. For some reason, when two people are in a call (both local to the * box, same subnet, pure SIP), the call will randomly be placed on hold and provide MOH to the other party. We're using Polycom IP430 handsets almost exclusively for this installation. Can anyone think of a reason why a call would

Hi list, I have for a year I have an account to call with broadvoice from about 3 days beginning a not registered problem of, asterisk shows to a message of error with the DNS, and my dns this working fine WARNING[5770]: chan_sip.c:7595 transmit_register: Probably a DNS error for registration to 908XXXXXXX at sip.broadvoice.com@sip.broadvoice.com, trying REGISTER again (after 20 seconds) [Dec 16

My provider migrated from an old EOL softswitch to Trixbox. I have a number (8159093011) on a different server on a different network. It appears as though the incoming calls are trying to authenticate against that number, which isn't present on the box. Could someone help me decode this debugging output? I was calling 8159911010. My server is 208.100.1.33. Theirs is 208.1.87.235. I

I have asterisk 1.0.5 installed via apt on a debian system. It's a custom distrobution called Voyage Linux that runs from a flash card and I have a hard drive installed with mysql installed on it as well as apache. I have been though the AMP install guide (asterisk management portal) and in the interface it has a place for me to record new IVR menus. I have to dial *77 to begin recording

Hello all, I am using Linksys SPA942 in my current installation activity. I see a peculiar behavior: A call is made and the SPA942 uses its speaker. When the far end of a call hangs up , the SPA942 stays off hook, and after a time plays a fast busy. The user then has to press the line presence button to hang up the phone. I think I must be missing some sip.conf parameter. My sip.conf is pretty

Hi everyone, I have been long working on a project (http://asterisktools.org, to be released under GPL) that aims to provide desktop tools for Macs. I am finally getting to the release stages of this application and hope to have an early BETA available next weekend. If there is anybody who is interested in this tool, please send me an email as I am looking for people who can test the

Hi, I have a strange problem. At a site where there are 20+ phones, there is one phone that cannot make outbound (to PSTN) calls. Each call is dropped after 20s with "no response to our critical packet". Calls to voicemail and internal extensions work fine. I understand that everything points to a NAT problem, but I don't understand how it could be because: 1) It does not affect

Before committing to about 50 of the spa942's, I like to take a last poll from those on the list to identify any negative issues that might be associated with the audio, functionality, early failures, etc, on the spa942. Expecting to deploy these using existing cat5 cabling and both rj45 jacks. Been using three of theme in a short term demo with the customer, but the demo systems has

I'm running AsteriskNow 1.7.1 with a OpenVox 2/FXO/2FXS card, a Linksys SPA942 SIP phone and outgoing SIP and IAX routes. When I dial local PSTN numbers from the SPA942 using the FXO channels I observe a 5-7 second delay between when the PSTN number answers the call and when Asterisk connects the call at my end. There's enough delay time that I hear an additional ring after the PSTN

Have someone running fine Alert-Info with a Snom 370 ( System Information: Phone Type: snom370-SIP MAC-Address: 0004132661BD IP-Address: 192.168.10.170 Firmware-Version: snom370-SIP 7.3.14 14961) i've tried exten => 200,1,SIPAddHeader(Alert-Info:<http://www.notused.com>\;info=alert-external) exten => 200,n,Dial(SIP/${EXTEN},30) Can see into the phone SIP trace is

I am trying to setup a simple pstn gateway using Asterisk and a X100p card. I have got everything installed using Redhat 9 and am able to load Asterisk. I also configured sip and I am able to connect to the asterisk gateway with Xlite on the windows side. I am able to dial 1000 and get the welcome message. What I am NOT able to do is dial a seven digit local or 10 digit long distance number and

I'm running AsteriskNow 1.7.1 with a OpenVox 2FXO/2FXS card, SPA942 SIP phone and outgoing SIP and IAX routes. When I dial local PSTN numbers from the SPA942 using the FXO channels I observe a 5-7 second delay between when the PSTN number answers the call and when Asterisk connects the call at my end. There's enough delay time that I hear an additional ring after the PSTN number has

Am having a unique problem, calls received on my SPA942 seem to end after 15 seconds, but calls made from this device do not have this problem. For this device (when receiving calls) I get periodic "chan_sip.c set_destination: can't find address for host" I have set the "canreinvite=no" in the sip.conf. Does anyone have a sample entry from sip.conf for the Lynksys SPA 942

Hi, I'm running asterisk realtime, i had prob when a user does not unregister properly. I tested with SPA942 and a PAP2, when phone is registered, i call using the SPA using x-lite no problem, but when i unplugged the power, it does not unregister properly, so asterisk think SPA942 is still registered, when i call using x-lite, asterisk tries to call it.so it gets stuck at [Aug 11

Hello! Sorry for the OT-thread, but i don't know where else too ask... Has anyone done http-provisioning of a Linksys SPA942 with client side ssl-authentication? Where do i get the CA from? I'm aware of the Sipura mass deployment howto on voip-info.org, but it doesn't cover the authentification part. Thanks Christian