similar to: cordless usb handsets: Uniden Win1200?

Can anyone recommend a good cordless user-configurable SIP hardphone that is readily available in the states and doesn't cost $300? There seem to be a plethora of decent and affordable corded phones (like from Grandstream) but the search for a cordless unit seems elusive. I purchased a vtech 8100 online only to discover after receiving it that it is locked to vonage service. Thank you.

I have a dilemma. I am trying to setup an asterisk setup for about 10 people, but with the ability to expand to 100s. We are looking into hardphones to use for our systems. Here are the requirments I am looking for: SIP Not POE Full duplex Speakerphone $100-$300 We would like to have the cordless and corded option if possible (at least for 3 of the 10 people). So here are the

does anyone know of a 2.4 or 5 ghz cordless phone system that has an ip base station? thanks

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

Basically, pretty much all the 2 line cordless systems I've seen come with a built in digital answering system that I'll never use, the main problem with this is that these units don't support VMWI (visual message waiting indicator) with telco supplied voicemail. This is a problem because I'll be setup an Asterisk system in the next month or so to handle my 2 analog and 1

I'm testing new cordless Motorola phone and the handset is constantly displaying message: MSG WAITING OFF According to the manual this message suppose to go off but it doesn't Is it something that I can control via * ? -- #Joseph

Hi, I am investigating getting a wifi VoIP phone because its may be a better option than an ATA and a cordless phone.. Does anyone have any experience with the whats out there?? Do they support things like WPA etc?? I have heard the battery life can be a problem.. Is this the case? Thanks..

I am trying to get a new Asterisk installation running using a Zultys ZIP2 phone and a Uniden 200 phone. I have the system working reasonably well (although probably not optimal) except for a couple of items. First, I can't get the voice mail message light to work on the Zultys phone but it works just fine on the Uniden phone. Second, the time presented on the Uniden UIP200 phone is 1 hour

I had a working system using * 1.0 and then 1.2 and now Asterisk 1.4.13 with addons 1.4.4, zaptel 1.4.6, libpri 1.4.2. I have a mix of Grandstream (GXP2000), Uniden uip-200, Linksys Wireless G, and analog phones via Adtran chan bank. When I went to * 1.4.13, the Uniden phones stopped being able to login to voicemail. All phones are on same lan with Asterisk. I get 'Login incorrect'

Hello, This is not exactly an Asterisk question, but I was encouraged to seek advice here anyway. The kindness of the * open source community is legendary :) I am getting going with an Asterisk 1.2 box, and I'm having trouble getting good quality transmit sound using handsets with VoIP phones. I'm primarily trying to focus on SPA-941, but also experimenting with Aastra 9113i and Uniden

I have a situation where we have an asterisk box that is extending several Mitel PBX extensions to some cordless SIP phones (Cisco WIP310). Everything works great, except when the cordless phone walks out of range of one access point and into range of another (cisco 1100 series APs). I've been able to get virtually seamless roaming between access points to work in the past with data but

Hello Everyone, My company is about to deploy * as replacement for our existing commercial Altigen PBX. Meanwhile, I've been trying to find the best cost effective SIP VoIP phone which we can use in office for 20-30 employees, as well as a few remote staff. Normally I wouldn't post about a VoIP phone, however, this phone was released less than a week so I thought I'd give some

Hi, all. I've got my Uniden UIP200 configured via TFTP (had to get DHCP 3.0.1 -- Debian's latest is 2.0.x!), and all seems well... except for the minor detail that it doesn't work. It registers fine with Asterisk, but when I copied my Grandstream's sip.conf info and plugged in the Uniden stuff, no dice. Any ideas? Thanks... -Ken unidencom.txt: OverwriteLocalSettings

Anyone know of a cordless 4 line DECT phone that does't have an answering machine? Or one that costs less than $300.00 (even with answering)? Yes I tried Google but Geeee too many results still sifting thru. TIA

Anyone used any of the Uniden VoIP gear, any comments one how easy it was to integrate with asterisk? Also quality of the gear in general? This unit _looks_ pretty nice on paper http://www.uniden.com/productpop/00_productpop.cfm?prd_code=UIP1868 -- Harondel J. Sibble Sibble Computer Consulting Creating solutions for the small business and home computer user. help@pdscc.com (use pgp keyid

Hi, all. Got my Uniden UIP200 today (ordered from thetwistergroup.com), and was very excited to set it up... until I came to the realization that there were no docs with it whatsoever. There was, however, a sheet of paper with the stock warnings (don't use the phone in the tub, etc.), AND a URL -- for documentation. Score! Well, no. The URL it gave me, bcs.uniden.com, does indeed have

Hello Everyone, My company is about to deploy * as replacement for our existing commercial Altigen PBX. Meanwhile, I've been trying to find the best cost effective SIP VoIP phone which we can use in office for 20-30 employees, as well as a few remote staff. Normally I wouldn't post about a VoIP phone, however, this phone was released less than a week so I thought I'd give some

Anyone using the UIP200 with *? I am having difficulty getting the phone to register and *stay* registered for more than 4 seconds. The * console shows the UIP200 registering and records the user agent. The UIP200 displays station name and time on its LCD, then 4 seconds pass and it shows #1 DISCONNECTED. The * console reports no problem and believes the device to still be registered. A call

Hi, I have a problem with this particular gamepad. I calibrated it under linux with jscal and it is working OK. But now I want to play FIFA with it and fifa don't detect it as Logitech WingMan Cordless Gamepad but as controler. I found wine registry tips and followed their guide for DirectInput but I have a problem because command specified there doesn't give the expected output: Code:

In that example you could make outgoing calls only correct? (since incoming likely needs port forwards) I guess the questions becomes "how often are you going to do that to justify the extra $100 or so you going to pay for a wifi sip phone?" Paul Fielding (paul.fielding@shaw.ca) wrote: > > I think some people are missing the point. You can't throw your cordless >