similar to: T.38 SIP Issues

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

I just set up a WRT54GS and now I can't dial out or in. sip show registry shows: CODE: SELECT ALL Host dnsmgr Username Refresh State Reg.Time draytel.org:5060 N xxxxx 120 Request Sent I seemed to recall that running in cli always showed a response back, but there's nothing now. Using

Hi I have just moved my firewall from a 2.6 debian machine to a 2.4.30 openwrt (linksys wrt54gs) box. I orginially had this working with 2 isp, 1 cable 1 adsl and dyndns. Now when i have moved to 2.4.30 I am having problems. Everything else is working fine except when I DNAT packets from the firewall to an internal address, ie my web browser is inside so I DNAT from the external IP to the

Hello everyone, Even though a lot of it was a bit last minute, several of us from the commnunity made it to Baltimore to help Digium with their booth at ISPCon. It was a great time. Gregory Boehnlein, Brian Capouch, Christian Savinovich, Kristian Kielhofner (me), and John Todd (not pictured) were there (as well as others), and some pictures were taken (the up close ones of me were very

Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing

Hi, I am pretty new to all of this but was able to set up an asterisk server and have been able to succesfully connect to asterisk with x-lite as sip client. I have also connected asterisk to FWD (using iax2) and to voipjet (also using iax2). Now I am trying to connect asterisk to Stanaphone. It has to register as a SIP client but I am not being succesful at all. My asterisk server sits behind a

i apologize if this has been asked before, but things are too busy to preclude a full search of the list. i have both cable and dsl from the local providers here. due to wiring issues here, i''ve been forced to put the cable modem in one end of the house and the dsl modem in the other. the cable modem is firewalled off by a cisco pix 501 (192.168.2.12). the dsl modem is firewalled off

Hello, I have a very strange problem that I can''t seem to be able to figure out. First of all: my network scheme: http://heavyg.safehex.be/network.png I have an agreement with my neighbour that I can use his wireless network to experiment with extra internet uplinks in exchange for some filesharing etc. Now I have set up a wireless router at my place, that connects to his network.

Hi All I have been able to get MP 104 FXO to make outbound calls with my asterisk box and polycom IP 500 phone. However I cannot get the incoming calls to hit the asterisk box. Any help will be appreciated. Thanks, Lal -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060612/36de60cc/attachment.htm

Hello, Did anyone succeeded in installing Asterisk on OpenWRT system. pls help. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090724/aee7ee12/attachment.htm

I have been banging my head against the wall for weeks now on this one. I have a switch running NetBSD and Asterisk 11.19.0 although I have had this problem on older versions as well. I, and my users, can call out, we can receive calls, quality is excellent but I cannot talk with one user. The different elements are as follows: The switch as described above which is in a server room on the

Hello guys, i have been on this mailing list for some weeks now, and i was wondering if someone here has installed linux on the XBOX and use it as a dedicated server. Its a 200 USD computer and could make it perfect to asterisk, its little and doesnt really take much space. My question is could this make it for a stable server??? here are some links i found for linux on XBOX

Did anyone see the article? It''s the first time I really noticed that these little Linksys routers are such a fully fledged linux machine with a decent processor and a replacable firmware. I am now itching to get one to replace the multipurpose firewall desktop machine. Has anyone experimented with the current state of the firmware and how advanced you can get with tc rules? For

I have asterisk running in a wrt54gs attached is a pap2 with 2 extensions working on it, the problem now is that there is lots of echo, some rythm in the background, and the voice is delayed by about 4 or 5 sec's between the 2 extensions. memory usage is about 15 to 20 megs so I think I can solve the problem with correct settings, anyone know where I might start to correct these issues

Hello For users who 1) don't have a QoS-capable ADSL router and 2) would like to run Asterisk with a couple of SIP trunks, I was wondering what hardware is recommend to run any of the main open-source *WRT projects to which Asterisk has been ported: (http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects Thank you.

Hello folks: This may have been discussed many times before but I have not been able to find it. I have also not been able to resolve it myself so I am asking here with hope that someone can straighten me out. I am using ip to do multisource policy routing or two connections to the internet. I have a linksys wrt54gs route which connects two machines by wire through the switch and three

FYI this topic has been covered on the Zebra and Quagga lists - hardware processors, memory, NICs, etc - software OS (Linux, *BSD), drivers, etc I''ve been running a couple of Linux routers for about 2 years now, I''m using them as core routers so I bought a couple of rackmount "server" boxes with redundant PSUs and h/w RAID (1) for hotswap disks. I''m using

I'm going to try and lay out all the relevant information I have here in this one post. I can provide more info if necessary. ISSUE 1: Office A routinely looses connection to Office B. When typing IAX2 Show Peers, it will show as Unreachable. I issue IAX2 Reload and it will work again for 1-3 days (haven't narrowed the time down yet). My theory is that the DSL at Office2 is changing

Asterisk 1.4.23.1 on Centos 5 When I turn on DEBUG to a high value (in this case 100) I see about a gazillion of these: pbx# fgrep 132034af765ea5467d69600902d14a22 /var/log/asterisk/full [Feb 20 15:21:57] DEBUG[15743] chan_sip.c: = No match Their Call ID: 132034af765ea5467d69600902d14a22 at 192.168.0.11 Their Tag Our tag: as5a51fc5e [Feb 20 15:21:57] DEBUG[15743] chan_sip.c: = Found Their

Gabe Bourque wrote: > Hello Anton Tinchev, > > I'm writing to you in hopes you can answer a few questions regarding > Asterisk/Digium and it's reliability. I saw your posting in the > Asterisk mailing list (Re: [Asterisk-Users] Is Asterisk ready for "real" > use?) and decided to write directly to you. The reason being that you > are one of only a few