similar to: Asterisk as SMSC to GSM-Phones

Hi, i've been discovering app_sms and it states that it can act as an smsc for landline sms. Receiving SMS from my Gigaset Phones is no problem and the SMS are stored as files on by * box. So far so good. Let us assume that i have a couple of phones which should be able to receive SMS directly from my * box ( and not from an SMSC from BT or Deutsche Telekom ), So all these phones have

hi is it possible to use asterisk as an sms central to send SMSes directly to clients on PSTN instead of just communicating with a central? the telco to which we're currently connected doesn't have a central.... roy

Hello! Is it possible to run Asterisk as a SMS Service Center and does it work over a directly connected ISDN (CAPI) interface card? Did anyone already use Asterisk for that? Roland Zagler mailto:r.zagler@fog.at @fog smart partners

I have a VoIP provider that terminates to a PSTN 10-digit number. I want to be able to send/receive SMS messages that appear to be from the 10-digit number that my VoIP provider gives me. I am currently integrating Asterisk with Kannel and it works great. Unfortunately, my mobile phone provider Cingular, doesn't allow me to alter my number when I send out SMS messages. Or at least

Where can I get a starting point for setting up sms via VoIP and via web. I want to send SMS from VoIP or web to VoIP phones and GSM phones. 1. how to set-up? 2. which smsc should I use? (what is the price?) 3. which phones can be used? bye Ronald

Hi, 1. Do you have any experience with receiving incoming SMS on an analog or ISDN landline ? How can then you differentiate an SMS call from a voice call ?

Hi all, Can someone tell me where to find source code for RSTP for linux 2.6 kernel? Thank you in advance. -Marc.

Hi, I have some experience in sending SMSs using smsclient. I call the german Vodafone SMSC (01722278020), and smsclient takes approx 20 secs to send a SMS. The hardware is an Sedlbauer ISDN card. Now, I want to do the same using asterisk and a digium PRI card. I dialed using the manager with: action: originate channel: Zap/g4/01722278020 ... I assumed, the call will fail, because the remote

Hi, I''ve tried several different approaches to debootstrap a working rootfs for with a Cortex A15 model ( FastModels ) and Xen but still face some issues. Some information on my setup. For a Dom0 kernel I''m using the latest version from git://github.com/torvalds/linux.git, I attached my config as it might be of some use for others. I''m using the latest Xen unstable

Hello all, is here anybody who have any idea how i can insert a script or program to rewrite a callerid with special rules. This ist necessary because of many moving mobile offices who changes the telefonenumbers in short time distances. I've found the SetCIDName feature. But this doesn't work in my relation. The phones from wich the calls are, are connected via OH323 Module and

The second part of my patch series to fix the handling of addr_assign_type for random MAC addresses. This contains the trival changes from random_ether_addr() to new eth_hw_addr_random() and code to reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address where eth_mac_addr wasn't used. Danny Kukawka (2): net: replace random_ether_addr() with

The second part of my patch series to fix the handling of addr_assign_type for random MAC addresses. This contains the trival changes from random_ether_addr() to new eth_hw_addr_random() and code to reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address where eth_mac_addr wasn't used. Danny Kukawka (2): net: replace random_ether_addr() with

The second part of my patch series to fix the handling of addr_assign_type for random MAC addresses. This contains the trival changes from random_ether_addr() to new eth_hw_addr_random() and code to reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address where eth_mac_addr wasn't used. Danny Kukawka (2): net: replace random_ether_addr() with

The second part of my patch series to fix the handling of addr_assign_type for random MAC addresses. This contains the trival changes from random_ether_addr() to new eth_hw_addr_random() and code to reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address where eth_mac_addr wasn't used. Resend due to send with too long recipients list. Sorry! Thanks to Joe

The second part of my patch series to fix the handling of addr_assign_type for random MAC addresses. This contains the trival changes from random_ether_addr() to new eth_hw_addr_random() and code to reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address where eth_mac_addr wasn't used. Resend due to send with too long recipients list. Sorry! Thanks to Joe

The second part of my patch series to fix the handling of addr_assign_type for random MAC addresses. This contains the trival changes from random_ether_addr() to new eth_hw_addr_random() and code to reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address where eth_mac_addr wasn't used. Resend due to send with too long recipients list. Sorry! Thanks to Joe

Hi, One of my model generates short messages that has to be delivered to mobile phones as SMS''s. I am not sure how to proceed from here. 1. What are the components I would need? 2. Do I need a GSM modem? If yes how would it integrate with my app? 3. Does my hosting provider needs to have a GSM modem? 4. Does sending an SMS cost anything? If yes how much would a single SMS cost? Any

hi has any one used OOH323C i tried this it is installed but do not know how to configure has any one used this, what is the best h323 addon to use with asterisk

Hello all, is it possible to make an outgoing call transferable for the dialing phones like the 't' or "T" option on the Dial-Command does this for incoming calls? Does someone have any idea? Thanks Hans-Peter Straub -- -------------------------------* I-NetPartner GmbH Hans-Peter Straub Seewiesenstrasse 12 D-73054 Eislingen -- Phone: +49 7161 9849955 Fax: +49 7161

This series add two important features. One of them changes the .ndo_tx_timeout to include an extra parameter to identify the stuck queue. Many drivers are using a nester loop to identify which queue is stooped/stucked. This is a redundant work since dev_watchdog is doing exactly the same thing. This is so interesting for other drivers to in terms of code optimization. The second part (second