similar to: Need good voicemail documentation

Displaying 20 results from an estimated 2000 matches similar to: "Need good voicemail documentation"

2008 Feb 13
2
MWI problem with Siemens Gigaset S675 IP
Hi list, Before purchasing a number of Siemens DECT SIP phones, the Gigaset S675 IP, I read that the problems with MWI had been fixed with the latest firmware version (see http://www.voip-info.org/wiki/view/Siemens+Gigaset+S675IP). Now I'm not so sure that's the case. After setting up a network mailbox for one of these phones, as well as an Asterisk voicemail account (ext.
2008 Jan 10
4
Asterisk 1.4 and ISDN-BRI support
Hi list, Has anyone been able to get ISDN-BRI support to work reliably on Asterisk 1.4? If so, I'd love to know how you did it (hardware, distro, kernel, modules, versions, config files). I've tried to get it to work on a Debian etch system with an HFC-PCI card and the zaptel package (v1.4.7, also from xorcom.com), but with no luck: all three channels that are created when the
2008 Feb 27
1
SPA3102 registration problem
Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I
2013 Mar 21
4
Asterisk 1.8 and dual stack support
Hi folks, Following an upgrade to Debian wheezy, I'm now running Asterisk 1.8.13.1. As opposed to Asterisk 1.6.2.9 that I ran with squeeze, this version can support IPv6. However, it seems that I can't get it to support both IPv4 and IPv6 at the same time. For example, if in sip.conf I set the bindaddr variable to '::' it will only listen on IPv6 and none of my IPv4-only
2012 May 18
3
Password problem
Hi folks, My client and I are having a problem getting a portable Esaote ultrasound machine to connect to a Samba server. The unit has an integrated laptop with a Windows XP version that can hardly be modified. Upon delivery the vendor only changed the user name and workgroup for us. When I asked for the user password to make a matching Samba account, the vendor refused because they use
2013 Mar 19
3
SIP account registration fails after upgrade to 1.8
Hi folks, Following an upgrade from Debian squeeze to wheezy, and Asterisk 1.6.2.9 to 1.8.13, my server is no longer able to register a connection to a SIP account at my ISP (XS4ALL in the Netherlands). At the same time, it is still able to register a different account with another SIP provider, so it must be that they no longer have the same basic requirements. The relevant part of my
2010 Aug 03
1
Asterisk 1.6 and PrivacyManager with SIP
Hi all, My latest Asterisk system is based on Debian squeeze with Asterisk 1.6.2.6-1 and SIP only. One of my favorite features that I had working with Asterisk 1.4 is the PrivacyManager. However, this was not straightforward, because anonymous SIP calls arrive with ${CALLERID(num)} = "anonymous", instead of being blank. So, to get it to work I added the first three rules to
2008 Feb 05
2
Can't delete voicemail messages
Hi list, After recently setting up voicemail for Asterisk 1.4.14 on my Debian etch server, I noticed that I can't delete any old voicemail messages. The voicemail menu option "Press 7 to delete this message" is available, but when I press 7 the response is always "message undeleted" and the message is still there. What could I be missing here? Thanks, Jaap
2008 Feb 18
2
SPA-3000 caller ID and KPN
Hi list, Hopefully, some of our Dutch members can help with this one. I'm also based in the Netherlands and am using a Sipura (Linksys) SPA-3000 (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test system. It works fine, except that the Called ID (CID) is not working. I'm aware that KPN (our local telco) requires a separate subscription to activate CID on POTS
2007 Dec 28
2
Problems with zaptel and HFC-S PCI card
Hi list, Now that I've got my Asterisk server to recognize my HFC-PCI card, I've run into some serious problems. The first thing I noticed was this message that would show up every five seconds on the CLI: Dec 27 15:46:42 WARNING[12484]: chan_zap.c:2512 pri_find_dchan: No D-channels available! Using Primary channel 3 as D-channel anyway! == Primary D-Channel on span 1 down
2007 Dec 24
1
sip.conf for internetcalls.com
Hi all, Perhaps someone here could help me with this. I'm new to Asterisk, but have already met with some success at getting my first system to work with two different VoIP (SIP) providers: XS4ALL and InternetCalls.com. The config for the former works fine, but my InternetCalls.com config works only intermittently for incoming calls. It currently looks like this: [general] port=5060
2012 Mar 27
1
Constantly changing USB product ID
Hi folks, Recently I learned how to configure libvirt with USB pass-though functionality. In my case I configured my guest domain with this block of code: <hostdev mode='subsystem' type='usb' managed='yes'> <source> <vendor id='0x0c93'/> <product id='0x1772'/> <address bus='1'
2008 Mar 05
1
Linksys SPA devices and CID
Hi list, After successfully configuring Linksys SPA3000 and SPA3102 devices as Asterisk PSTN gateways, the only thing I can't get working is the PSTN Caller ID. The analog and SIP phones I've used can both display CIDs for internal calls, while the analog model also displays CIDs correctly when attached directly to the PSTN line. However, when PSTN calls come in via the SPA
2012 Mar 29
2
PCI passthrough error
Hi folks, Has anyone encountered the following PCI passthrough error? error: internal error Process exited while reading console \ log output: char device redirected to /dev/pts/1 assigned_dev_pci_read: pread failed, ret = 0 errno = 2 It's produced after I've detached the PCI device from the base OS and have tried to start up the guest domain. To get to this point, I
2010 May 10
1
Simulating a commercial SIP provider
Hi all, The kind of configuration that I use in my sip.conf to connect to various commercial SIP providers looks like this: [general] context=incoming-calls canreinvite=no qualify=yes register => jwinius:passwrd at sip.provider.com/0201234567 [provider] type=peer host=sip.provider.com fromuser=jwinius secret=passwrd This works. However, how would I
2009 Jun 10
1
PrivacyManager no longer working properly
Hi all, Previously, I had the PrivacyManager working for me exactly as would be expected, but after upgrading the OS to Debian lenny and Asterisk to v1.4.21.2 that's no longer the case. Anonymous callers are still confronted with the PrivacyManager, but now no matter what I set the minlength value to, e.g.: exten => jaap,n,PrivacyManager(1,1) ... (I'm not using a
2008 Feb 11
2
Automon reliability issue
Hi list, Can someone please explain how to get one touch recording (automon) to work reliably? I'm using Asterisk 1.4.14 on a Debian etch system. My current configuration includes the following settings: In /etc/asterisk/sip.conf: [2000] ; Siemens Gigaset S675 IP wireless SIP phone. type=friend secret=1234 context=phones-j dtmfmode=rfc2833 qualify=yes
2010 Apr 01
2
Problem with Sangoma A104 and euroisdn pri
Hi all, My problem boils down to these errors: ... Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time This is triggered by lines in extentions.conf such as: exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W) The system is CentOS v5.2 with Asterisk 1.4.23 (druid-asterisk-1.4.23.1-2), a Sangoma A104
2007 Dec 29
2
Cirpack KeepAlive packets causing SIP errors
Hi list, After a recent upgrade to Asterisk v1.4.14, my message log is now filling up with the following error messages: <-------------> [Dec 29 17:24:52] WARNING[10655]: chan_sip.c:6645 determine_firstline_parts: Bad request protocol Packet --- (1 headers 0 lines) --- bitis*CLI> <--- SIP read from 82.101.62.99:5060 ---> Cirpack KeepAlive Packet <-------------> Seeing
2010 Apr 13
2
cat /proc/zaptel/*
Hi all, On an Asterisk/Zaptel 1.4 system, one way to gather diagnostic info is: ~# cat /proc/zaptel/* Span 1: ZTHFC1 "HFC-S PCI A Zaptel Driver card 0 [TE]" (MASTER) AMI/CCS 1 ZTHFC1/0/1 Clear (In use) 2 ZTHFC1/0/2 Clear (In use) 3 ZTHFC1/0/3 HDLCFCS (In use) Span 2: ZTHFC2 "HFC-S PCI A Zaptel Driver card 1 [TE]" AMI/CCS 4 ZTHFC2/0/1 Clear 5 ZTHFC2/0/2