similar to: Asterisk and MRTG, a little help please...

I have tried to get MRTG to graph my Asterisk box but have run into a problem. When I run the perl script provided at: http://karlsbakk.net/asterisk/ I get the following error: [root@tsr asterisk]# ./asterisk-mrtg -h myasteriskip.mydomain.com<http://myasteriskip.mydomain.com>-v -1 SIP -2 IAX2 -u 109 -p xxxx Asterisk Call Manager/1.0 Action: Login Username: 109 Secret: xxxx Response:

Hi guys, I''m new to TC HTB traffic shaping.... I installed it at my first try on my Bearing Leaf Router/Firewall I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it''s figures, of which at current momment looks like French to me, I would like to see exactly what these figures looks like in a GRAPH style... I know I can use MRTG, I do have

I'm trying to get MRTG up and running on CentOS, but the displayed http page says that I don't have permission to access /mrtg/ on the server. Here are my commands yum install mrtg vim /etc/httpd/conf.d/mrtg.conf /etc/init.d/httpd restart cfgmaker --global 'WorkDir: /var/www/mrtg' --global 'Options[_]: bits,growright' --output /etc/mrtg/mrtg.cfg public at 10.200.200.1

On 1/28/08, JR Richardson <jmr.richardson at gmail.com> wrote: > > You need to take a step back and first test the script without using > > MRTG. Execute it like this: > > # /opt/bin/asterisk-mrtg -h localhost -u XXX -p XXXX -1 SIP -2 Zap > > 10 > > 10 > > 10 > > 10 > > > > You should get 4 lines of numbers. That respresents your SIP

I have created shell script for MRTG statistics of droped/rejected packets: ftp://slovakia.shorewall.net/mirror/shorewall/mrtg/ http://slovakia.shorewall.net/pub/shorewall/mrtg/ rsync://slovakia.shorewall.net/shorewall/mrtg/ example: http://slovakia.shorewall.net/pub/shorewall/mrtg/example/ It is not based on /var/log/messages (syslog), but iptables counter. A lot of packets are droped/rejected

Hi, I have setup MRTG with 14all.cgi cgi script. I downloaded it from below URL. http://my14all.sourceforge.net/14all-1.1.txt and did only below 3 changes to that file. those can be seen in BOLDletters. # if MRTG_lib.pm (from mrtg) is not in the module search path (@INC) # uncomment the following line and change the path appropriatly: #use lib qw(/usr/local/mrtg-2/lib/mrtg2); use lib

Hi, i'm running CentOS 6.0 on my server and installed mrtg from the rpm-package mrtg-2.16.2 . I also installed the depending packages perl-IO-Socket-INET6 perl-Socket6 .... mrtg works fine with IPV4-Addresses. When i specify a Target by IPV6-Address (or hostname resolving to a V6-address) mrtg fails. Here i have a small sample-config for V4 which is working: LogDir: /tmp ThreshDir: /tmp

I got itchy fingers over the weekend and decided to fix what wasn't broken and upgraded one of the older servers from Centos 5.2 to Centos 5.3. Following the recommended process of updating glibc and such before the rest, it appeared to work perfectly and rebooted without problem. However, MRTG 2.15.2 started complaining about unexpected values. I installed/updated both MRTG (2.16.2) and

Is there any way to find-out the peak number of calls that an asterisk system has had? Not the total number of calls, but the maximum number of simultaneous calls. I know I can porobably go through the CDR logs and look for calls which have overlapped in time, but I'm wondering if there's some counter somewhere I could access... (I'm looking for evidence for an ISDN client who

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

Ok, I'm having a major brain hemorrhage or something. I just can't get mrtg setup on my box. I've done it before and it's not like it's brain surgery but there's a mental block or something that I just can't get around. All I want to do is have a nice, simple graph of the traffic on the box and the gateway in the standard day/week/month/year thing. I've got the

Hi all Just wondering if anyone has pointers for graphing data from Samba using MRTG. I already have MRTG graphing things like signal strength (cisco aironet pci), total kbps in/out each interface, mem and disk i/o usage. I'd like to graph, for example, average number connections over time; or maybe logins per hour .... or failed logins per hour. I know MRTG's requirements for input

I want to check some client OpenVPN TUN interfaces with MRTG running at my VPN server, so I have to specify their OID interface numbers in mrtg.cfg. The problem is, these numbers are dynamic, as they may change whenever OpenVPN restarts for any reason... so, how can I write stanzas such as Target[somehostvpninterface] : ifInOctets.X&ifOutOctets.X:public@ <SOMEHOST.IP> without wiring up

any help/tips/document/link to setup and configure MRTG under Centos. Thanks

I check system load like so: [root at server cron.daily]# w 10:07:33 up 4 days, 15:01, 2 users, load average: 4.22, 3.17, 3.09 I would like to to graph the 3.17 5 minute average with MRTG. Anyone know of some examples of doing this?

Is there an easy way to graph ethernet eth0 on Centos 7 with MRTG without using SNMP? I thought I found a way to do this in past by using a shell script to poll the interface but cannot find it back.

Has anyone written any MRTG scripts for monitoring domain CPU usage? It''s probably pretty simple to do, but there''s not much point re-inventing the wheel. Thanks James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I would like to write a simple guide to getting MRTG up and running on CentOS 5. I was thinking the Tips and Tricks - Tools and Applications section would work well. My username on the wiki is ChrisNaude. Thanks, Chris Naude

i''ve installed mrtg to make graphics of the trafic from the interfece throw the snmpd, and the same with ipac witch put iptables accounting rules colect them and store, and gets the output, but the "problem" is that ipac graphics are 3 times smaller that the snmpd. Why??? i did catch all the trafic with ipac so no problem here, and i know that ipac/iptables is at level 3, and

Hi, Steff. Next file are not found on your website: http://www.docum.org/stef.coene/qos/tc-snmp//example/html/mrtg.cfg can you post it ? Thank you ! Andres _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/