similar to: Loosing IAX/SIP user's registration

Hello list, hope some one could help me find the answer. Asterisk 1.4.16.2 installd as no-root user The main issue is that every now and then, cd * box seems to loose the user's registrations, there is nothing in the console, absolutely no messages, only when another friend trys to dial an extension I can see this on messages logs [Jan 26 10:35:46] WARNING[23015] app_dial.c: Unable to

Asterisk 1.4.21.1 built by asterisk @ lnxca Fedora 7 Well, I did the upgrade from version 1.4.16.2 to 1.4.21.1, activated the qualify for iax users, and Asterisk is still loosing the iax user's registration. Once again this is really wired because no configurations changes have been done to the system, the only change was a reinstallation of asterisk with user "asterisk" instead of

Hi All, I am having problems with some SIP peers. I seem to loose registration. If I reload SIP the registration comes back. They usually stay registered for about 2 days before they drop. The problem is not all of them drop usually just the list 2 in the list. The other strange thing is that the 2 the do drop their registration do not occur at the exact same time. It could be many hours

Hi, I have a nufone connection (IAX2), works fine. In my iax.conf I do not specify a time interval that * needs to renew registrations with nufone server. However I can see following registration messages on my cli every 90 seconds (approximately) --Registered to '198.22.67.70', who sees us as 69.5X.XXX.XXX:4569 --Registered to '198.22.67.70', who sees us as 69.5X.XXX.XXX:4569

Hi there, I'm having problems with the current Debian unstable package of Asterisk. I'm not sure if it's package related or a general problem with Asterisk, so bear with me please. I'm running my Asterisk on my home net behind NAT. Deutsche Telekom's ADSL is slightly braindead in that they drop the connection after being online constantly for 24 hours so you have to reconnect

I'm hoping someone can help me out with this. I am basically just trying to separate my outbound and inbound calls into separate contexts instead of having everything in a single context. Any help would be appreciated. Perhaps I've missed something really obvious.... Here is the network layout: <remote> <--TDM400P--> <nattedbox> <--IAX--> <liveipbox>

I have a handful of 7912's connected to my asterisk 1.2.14 server. (6 to be exact). I get the X on the display sometimes for loosing registration. I have the config file for the 7912's SipRegInterval: 60 and asterisk is the default. ; maxexpirey=3600 ;defaultexpirey=120 I've not changed them. How can I keep these phones online and stop loosing registration? Thanks, Jerry

Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing

Good morning, I am trying to use the Windows iax client. My iax.conf looks like this: [general] port=5036 bindaddr=10.1.3.111 bandwidth=high allow=gsm ; Always allow GSM, it's cool :) tos=lowdelay [pos| type=friend context=default auth=plaintext secret=pos deny=0.0.0.0/0.0.0.0 permit=10.1.3.0/255.255.255.0 host=dynamic defaultip=10.1.3.2 In the registrations dialog

Hi, I'm trying to get my * server connected to a softswitch through an SBC. I get the following error when * trys to register. Got SIP response 423 "Interval Too Brief" back from xxx.xxx.xxx.xxx Jan 20 12:43:54 NOTICE[2138]: chan_sip.c:5473 sip_reg_timeout: -- Registration for '1234561234@xxx.xxx.xxx.xxx ' timed out, trying again (Attempt #9) Is there something I can

Hello All, For some odd reasons my Asterisk is keep on loosing registration of my SIP devices. On the SIP device it shows I am RESISTED but when I do "sip show peers" it shows my sip endpoints are "UNREACHABLE". And it keeps on flapping "Peer '9099993456' is now UNREACHABLE!" and "Peer '9099993456' is now REACHABLE!"... I changed my

I'm looking for some help in how to keep asterisk from doing this. If we loose Internet or routing to our upstream provider even for only a few short minutes asterisk quickly gives up & never tries again. I have to do a manual reload to get it to register with my sip provider(s) again before incoming calls are accepted. This is really bad as it causes us to loose the ability to get

Has anyone written an app that monitors SIP/IAX registration attempts? A couple of clients are being flooded with SIP registrations (but the source IP changes every few hours so IPtables won't do).. I would think that any attempt to reg 5 times with a bad password should cause a 5 minute timeout until reg is considered again. Has anyone written such an app? The name app_hackblock is my

Hello, I have a problem with an LAN-Server behind an NAT-router. Asterisk Version 1.2.1 or 1.2.2 doesnt matter 10 minutes after starting Asterisk I loose all registrations at external SIP-proxys. The reason seemed to be that Asterisk send every second an request to every sip-proxy "Request: OPTIONS sip:sip.domain.tld". Every request is responded by the sip-proxy. After some minutes

Hello, I have a local Asterisk server that keep loosing its registration to main Asterisk server. The local asterisk server is on the local subnet, it acts as a client with extension 808. Local server Sip.conf register => 808:password at as2.xxxxx.com registertimeout=20 registerattempts=10 Main Asterisk Server sip.conf [808] type=friend context=sip-phones call-limit=99

Hi all, I've had a strange problem this morning and I know someone who has reported exactly this problem to me too last week: - I've setup a new server running Asterisk 1.2.4. Currently there is no Zaptel hardware install (but there will be soon). This server is behind a NAT router on an DSL line. The remote IAX server on the Internet (which handles the call termination / origin)

I have a customer that has recently upgraded their network and now their Aastra 9133i phones are loosing their connection to the Asterisk server. They were using an external Asterisk server and now we have installed a new internal server with Asterisk 1.4.8 on a SIP/IAX implementation with no Zap cards. Only hard phones seem to be having problems keeping a connection to the server, soft phones

Hi, I'm new to this list. I tried to google and did a _bit_ of searching in teh archive but didn't find anything related to my problem. I use samba 2.2.8a as the PDC on SuSE-linux 8.0. I administrate 7 Rooms with 160 PC, mainly w2k-sp3 and some older with NT4-sp6. In two of seven rooms some PC loose their Domain-membership. I can bring them back into Domain, but they seem to loose it after

I tried to connect my * to IAXtel, but i always get this errors. chan_iax2.c:5849 socket_read: Registration of 'mnetwork' rejected: Registration Refused On dial a iax number i get: chan_iax2.c:5526 socket_read: Call rejected by 69.73.19.178: No authority found chan_iax2.c:5528 socket_read: Immediately destroying 3, having received reject chan_iax2.c:2411 iax2_hangup: We're hanging

I have, in iax.conf the register statement: register => username:password@iaxtel.com This causes registration attempts to iaxtel.com for both IAX and IAX2. Every once in a while there is a packet for port 4569 keeping the IAX2 registration alive. This is fine. But, I have a barrage of registration attempts to iaxtel on port 5036 for IAX. Every UDP packet is answered with an ICMP packet