similar to: blf and misdn

Hello all, I am using asterisk 1.4.17 together with misdn, once in a while: -when a call was put on hold -the operator tries to call a internal party for transfering the call -the internal party doesn't answer the phone -the operator wants to get the external line backup again by putting the call "off hold" And then the external line is disconnected. an exact log of events is

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Hello All, can anybody tell me how can i integrate asterisk and skype users so that skype users can dial my asterisk number or dial internal dialplan form skype regars Dhaval -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090708/cccd4587/attachment.htm

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

Is there a way to set/clear a BLF LED on a phone from the dialplan? I want to use one as an indicator of some state in the PBX - in this case it's "night mode" but I can think of other applications. I have BLFs working just fine for "normal" stuff, just wonderin if I can use them for more! Cheers, Gordon

Hi there. My problem, I can't figure out how to ask this question. So, hopefully someone out here can point me to the FM on this. I would like to have either a web page or an application that I can view that whenever a call arrives on the Asterisk server the application will display the callerid information. I've found quite a few examples of the reverse of this. To where a script is

Hi, 1. You can now find several SIP harphones with bicolor BLFs (see Polycom, Cisco, ...). Is there a protocol which best describes how to use this bicolor BLD feature ? 2. I would like to map these BLFs to the following user activities : - user is logged off: no light - user is logged in: green light - phone is ringing: blinking light - user is on call: red light It seems that

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Is there anyway to "spoof" a BLF signal to a phone from within a dialplan? That being so I can turn a BLF light on or off on a phone when a certain thing happens in a dialplan?

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm having a problem getting a snom 300 to work with BLF (extension 222). I've set it to watch extension 220 in the function key config pages as per the wiki (BLF, <sip:220 at server.com>) but I can't get the light to come on when 220 is ringing. The SIP trace page doesn't show anything coming from my PBX when 220 is ringing or in use. Any help much appreciated as this

Hi The blf-crypt password schema mentioned in the docs could be a solution to my auth problem. However, the docs state that actual support depends on the glibc. Mine apparently doesn't. Does support depend on the glibc's version (mine is 2.15-r2)? Maybe someone with access to a box with a good enough glibc could do the following and post the hash for the plain password "test"?

I have servers setup in versions 11 and 13. Between two 11 servers, I had no issues sharing BLF, and assigning the hints on my Cisco 525G2 phones. I've upgraded to 13 on one of these servers, and now can't share BLF. I get something like... [2017-07-15 22:35:49] NOTICE[3483]: res_pjsip/pjsip_distributor.c:347 log_unidentified_request: Request from '"Travis Ryan" <sip:612

I'm trying to get the BLF to work correctly on my Polycom phones. I have the buddy watch working correctly, but can't get the BLF to change based on the state... Example: When an extension is ringing, I get the same 'red light' that I get when the extension is actually in use... I was wondering if anyone had any experience with getting the Polycom phone to

I have a setup with Yealink phones & Asterisk Server (all latest patches). I am using BLF to display the states of other phones. While this works MOST of the time (busy, being called) it does NOT work when a phone is NOT regisstered at all, the yealink phones display a green dot EVEN if a phone is turned off (try explain this to users, they are shaking their heads!!!) I can see on the

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

Greetings, this is less of a bug report or a help request, but we would like to know if someone can explain the following: Environment: Centos 7 with Dovecot 2.3.4-2 default_pass_scheme = BLF-CRYPT password hash in database : BLF-CRYPT login = works default_pass_scheme = SHA512 or SHA256-CRYPT password hash in database : BLF-CRYPT login = also works default_pass_scheme = BLF-CRYPT password

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

Hello list, Can I do something like this for BLF functionality : [test-blf] exten => _XX,hint,Macro(GetSIPaccount,${EXTEN}) exten => _XX,hint,SIP/${SIPACCOUNT} GetSIPaccount is a macro that looks at a MySQL-database for the realtime table sip_buddies where the SIPusername is taken from. It works great for internal calls... but how about BLF-functionality ?? Feedback is appreciated !