similar to: IMAP client in asterisk not trying to contact IMAP server

Hello, I am wanting to close a specific channel for example; SofthangUp(SIP/EXTEN-UNIQUEID) but the problem is the channel is assigned a unique id as well. The need fits into the idea of receiving a call from a higher status user and thus closing a specific channel to allow the higher priority call to route through the dial plan to the freed extension. Any ideas welcome. Many thanks

Hi, did anybody manage to configure Asterisk (1.4.8) with imap voicemail storage together with an Microsoft Exchange Server (2003)? I can connect my asterisk to a local dovecot imap server without problems. But if I change the settings to our exchange server I can?t connect... Here is my config: imapserver=exchangeserver imapport=143 expungeonhangup=no imapfolder=INBOX imapflags=notls

Hello, everyone. No need to read this message. I'm posting for documentation for other poor, ignorant slobs like me who are struggling to pull together the many technologies to make converged networks happen. Hopefully, this will help save someone else the time I spent. I started the below email until I realized I had solved multiple parts of a compound problem but not all at the same time.

I am doing some testing with 1.4 and the imap storage and a exchange 2003 server. I have not had any positive results so far using the notes on the wiki or the docs in the release. My current settings are imapserver=<server> imapport=143 imapfolder=Voicemail ;imapflags=novalidate-cert expungeonhangup=no [default] 1114 =>1114,Bruce Reeves,breeves@titanspecialties.com

Hello, all. I am attempting to use IMAP voice mail storage in Asterisk 1.6.1.1 on CentOS 5.3 using Zimbra 5.1.6. I will not be using it as it has proved terribly unstable - Asterisk segfaults on every voice mail message although the message is successfully deliver to my email inbox - but I thought I should report it. Here are the errors from the Asterisk console: -- Executing [210 at

Hi - I just deployed a system using IMAP Voicemail. During my testing, voicemail worked fine. I could check vm from the phone, and the messages would get marked as read, or I could read the messages in a mail client, and the phone's mwi light would turn off. Very neat. I'm not exactly sure when things got munged up, but something broke. I can record messages with Voicemail(), but now

Hello, am attempting again to resolve an issue with multi-tenancy and the forwarding to VMs between mailboxes. If in a multi-tenancy environment one uses custom contexts ie. [a1-ext1](a1) mailbox=101 at a1 and the associated voicemail.conf entry: [a1] 101 => 1234,My User 1,addr1 at email.com,,tz=eastern|imapuser=addr1 at email.com|imapfolder=Inbox 102 => 1234,My User 2,addr2 at

Hello, I have several voicemail accounts that share the same IMAP mailbox (same imapuser), and I'd like to store their messages in separate IMAP subfolders. I tried to set 'imapfolder' settings on a per voicemail account basis, but it does not seem to work. All messages keep being stored in the same INBOX folder. Should I file a feature request on the asterisk-dev list, or is there a

I have built samba 3.0.8 with ADS support. From the Solaris 9 end it appeared to join the active directory server domain OK. However when I look using Windows Explorer on the ADS (Windows 2003) machine it appears as Samba 3.0.8 server under WORKGROUP, and I cannot access the shares. I am using the MIT kerberos. The Howto guide on page 74 is a bit ambiguous. I read it to say that if you are

1.6 UPGRADE.txt: > * If you use any interface for modifying voicemail aside from the built in > dialplan applications, then the option "pollmailboxes" *must* be set in > voicemail.conf for message waiting indication (MWI) to work properly. This > is because Voicemail notification is now event based instead of polling > based. The channel drivers are no longer

I thought I would give the new IMAP support a spin on my home server, but without much luck so far. Asterisk 1.4.0 Dovecot 0.99.14 Maildir format C-client 2006d The imap server is also the Asterisk server, so connections are on the localhost. The error posted to the logs is: IMAP Error: Can't open mailbox {127.0.0.1:143/imap/authuser=root//user=dan_austin}INBOX: invalid remote specification

Hello! I just joined the list and will be happy to help where I can in my limited experience, but also come to the table with a question. I think there's something I'm missing regarding shared mailboxes and ACLs, so I will describe my situation and see if I am understanding correctly (running Dovecot 1.1.10). I have read over the Dovecot Wiki many times and have scoured many forums but

I know some of this doesn't belong on this list, but I am just including it for problem history. I am trying to setup IMAP Voicemail with our email server. We are using a non-standards based groupware server called FirstClass. The server has some built in support for IMAP. My problem seems to be that the authuser flag is not supported. When I use mtest in the imap toolkit to connect to

hi all If I try to register a cisco 7945 phone (firmware sip v 9.2) to a asterisk server 1.8.5 I set in the xml file SEPmac.cnf.xml <callManager> <processNodeName>IP_ADDRESS_ASTERISK</processNodeName> ... and in the line 1 settings <proxy>USECALLMANAGER</proxy> it works good . Now I need to use the phone with 2

mailboxes). Are you certain that removing either 612 or 610 mailbox would keep Asterisk from complaining ? > > However, the MWI does not indicate voice mails for 610 and I keep seeing > this error message: > > ERROR[2549]: app_voicemail.c:1630 messagecount: Couldn't find mailbox > 610 in context a10 > > However, mailbox 610 is clearly defined in voicemail.conf: >

On Mon, September 14, 2015 14:51, James B. Byrne wrote: > The Logwatch imapd service script distributed with CentOS-6 does not > generate anything when I run logwatch --service all on a cyrus-imapd > host. Is this expected behaviour? Is there a separate script for > cyrus-imapd or are their configuration options required to get the > existing script to work. > > I have found

continuing discussions of 79xx issues. i've seen referenced and am experiencing difficulty getting a 7970 to work behind NAT to a public asterisk server. i am successful with 7960s. 1. SIP load is 70.8-3-3SR2S 2. config works fine if 7970 is connecting to an asterisk server a local LAN (same subnet) 3. when debugging it in a NAT'd environment I see the register and

Not sure if this is a bug yet, so I wanted to ask around to see if anyone else was having this issue. I have pollmailboxes=yes set in voicemail.conf but externnotify is not called. I know it isn't the externnotify script because if the changes are done in asterisk then it is called properly, if the changes are done via our webserver then it is not. Also, we use odbc voicemail storage. Thanks

Hi, I have been using Cisco 7960's with Asterisk for years. I am trying get a 7961 working and have a problem. In my configuration, not all of my line appearances register to the same Asterisk SIP server. I have an Asterisk server at home and another at work. My Line 1 button registers to the home server and my Line 2 button registers to the work server. This has worked for years

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any