similar to: Newbie: confusion with the new FXO/FXS card

Hi, MixMonitor saves partial conversation when non-standard voice packet size is set (Asterisk 1.4.18.1). For example, if SIP-peer has alaw:30 then saved file would contain only 67% of total conversation. With alaw:20 MixMonitor saves 100% of conversation. It seems that MixMonitor has hardcoded "packets per second" or "samples per packet" values. I did a lot of googling, but

Have you set port 2 as 'NT' in the mISDN config file (not the Asterisk one)? Also, you will probably need to set it to ptmp. You need to configure them in misdn.conf (the Asterisk one this time). Here's the tail of my misdn.conf (4 x BRI): [trunks] ports = 1,2 ; physical port numbers (as defined in mISDN.conf) context = inbound ; context for incoming calls in

Does anyone have any suggestions for connecting analog DID trunks? I have some small locations that will have 2 analog DID trunks each, the only solution that I can see will work will be using a channel bank and T1 card, but it will be close to $1500 to terminate these DID trunks. Was hoping someone had some experience using an ATA or TDM card and analog DID trunks. Rhino Channel Bank - $750 4

Hello, I have asterisk server with two isdn bri cards (billion) using zaphfc driver. Also I have from telephone company routed (for example) 16 pstn numbers. It is technically possible to dial SIP phone from outside before answering isdn pstn line. I have local numbers 201,202,203 and from telecomunication company numbers 555201,555202,555203. I don't want to be "pstn"

Hi everyone, Our company has decided to make a fake POP3 (and possibly IMAP) server, which accepts any user name and password combination and shows there are no new messages. This is for the purpose that when our mail cluster passes out, we can redirect our clients to this server while we fix our mail system. This way we can prevent our users from getting errors. We are using the latest

Hi all, we're buildin an Asterisk box based on an Intel IXP425 board. The board uses a Beronet BN2S0 ISDN card, mISDN 1.1.4 and asterisk 1.4.2. hfc_multi has been patched to compile under big endian cpu, and so also capi kernel files. All the modules seem to load correctly (configuration was made with misdn-init config), but when starting cha_misdn, asterisk outputs the following lines: P[ 1]

Hello, I would like to consulate with you guys. I'm setting up an Asterisk server on Debian. The problem is that Rhino drivers are only compatible with Zaptel 1.2. By default debian stable offers asterisk 1.2 and zaptel 1.2, and that suits our needs. Is there a bleeding need to use latest version of asterisk? I have managed to install Asterisk 1.4 and Zaptel 1.2 but then i got the

Hello Folks, I'm trying to decide here between a few cards for connecting an Asterisk box to a single E1 channel (either PRI or R2 signaling): - Digium E100P: has been replaced by the TE110P below, but can still be had at places like digitnetworks.com for $475, and I guess there's always a place for good-olde-obsolete cards in the world as long as they work :-) - Digium TE110P:

Hi Railers, Does anyone have any guidance on setting up a simple way to handle product variations (e.g garment size/color)? Initially, I had thought that I would make a variation model which defined the extra bits, but it seems quite inflexible especially so if a store were to sell non-clothing items that also had variants of one flavor or another. product has_many variations title

Newbie Q: Building a webstore and need to have SLL-encryption on the checkout pages... I have no previous experience with SSL. I understand that I need a SSL-certificate. I''m planning on purchasing the cert from RapidSSL, but to do that I need to generate a CSR (Certificate Signing Request). How do I do that? How do I install the certificate on the server? Are there any guides on

I've been asked to look at deploying Asterisk in a high availability environment and I've been looking so I've been searching for methods to decouple the voice PRI circuits from the Asterisk server so failover to another server could take place. I've been looking at the RedFone foneBRIDGE2 2e1 product here:

Hi all, I can't find a working archive search for this list, so please forgive me if this has been discussed before. Has any thought been given to supporting websockets in the ssh client? I'm talking about solely using a websocket as the transport layer, and leaving the actual protocol intact, as opposed to the (to me, frankly terrifying) idea of allowing a web server to act as an ssh

Hy, I have dowloaded the R-version for Windows. I would want to plot different pictures on the same device, but I am not able to do it (i.e I would like make 2 qqplot on the same graphic). Can you help me? Thanks in advance Davide reply to: d.tarfanelli at libero.it -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read

On 07/02/2015 04:44 PM, David Keaton wrote: > On 07/02/2015 03:17 AM, Kuperstein, Michael M wrote: >> You want to redefine ["won't break the program"], by specifying a new >> abstract machine, which is >> more conservative than standard C/C++. The proper way to do that would, >> I believe, be to work towards setting up a working group within the >>

On 29/01/15 21:15, Alex Bligh wrote: > Be frightened: > https://chrome.google.com/webstore/detail/secure-shell/pnhechapfaindjhompbnflcldabbghjo?hl=en > That's a ssh client implemented in chromium, not a web server acting as sshd. However... ?Secure Shell also knows how to connect to an HTTP-to-ssh relay that was built inside Google. Unfortunately that relay isn't open source,

Hi, folks: I remain intrigued by the gap in BRI implementation between North America and Europe, and I wanted to get feedback from the list members on the matter. I'm seriously considering making the leap in our office. In Europe, the idea that an office that does not have enough lines to justify PRI would use analog lines is perceived as technologically backwards, and yet that's what

Good afternoon all, I'm a web developer (c#) who also manages a small hosting environment. Roughly, our configuration is: Two IIS7 (Windows Server 2008 Web) servers which share configuration data and site files from a SMB share located on a ubuntu server. The ubuntu server is currently running 3.0.28a which is quite old, but read on. We've been having a problem with the change

I'd be interested in using this but I have to wait until someone ports this to firefox (or at least chromium). Thanks for sharing it though! On 3/31/20 2:16 PM, River Riddle via llvm-dev wrote: > For those interested I've uploaded to the chrome store to make installs > easier. An install link is now included on the repo. > > -- River > > On Mon, Mar 30, 2020, 1:44 PM

I am very new to RoR. I need to do: 1. credit card authorization only and / or 2. charge the credit card via the Authorize.net payment gateway via RoR? QUESTION 1. I came across the payment module available as a ruby gem. I am wondering if anyone has used this gem in a real life application to do the above? The other problem was that on this page:

Hi, i have two asterisk@hotme 2.2 server. i want if one of my asterisk server down. other is taken control of my first server and call goes through. Is it possible in asterisk. Usman -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051216/7b0c169d/attachment.htm