similar to: Presentation Restricted h.323-SIP issue

Hi all, A few days ago I found out with help of some of you guys how to set CLIR. (Calling line identification restriction) My first idea was to use the keypad protocol to set the CLIR with dialing *31* before the number but this was not possible. So thanks to Damon Estep I got it to work with executing 'SetCallerPres(prohib)' before the dial command. This works perfectly! But now

Hello! I just encountered a strange thing in my mysql cdr records. From a certain date on Asterisk (1.4.6) stopped to populate the CLIR and SCR flieds in the cdr table. As far as I know no changes happened to the system on that date and until then CLIR are recorded properly. The CLIR is still transmitted by the PRI and is shown in the console when a call comes in. But no traces of it in the CDR.

hi I have a passive isdn port configured in modem.conf in extention.conf i use this two channel (ttyI0 and ttyI1) with the string: exten => _NXXXXXXXXX,1,Dial,Modem/g1:${EXTEN}|60|r how can i hide my msn? is it possible to activate the clir with the @ before the ${EXTEN}? thanks Cristian

When a user calling over the PSTN network calls one of our SIP users with a restricted number (CLIR), our PSTN gateway is sending us incoming calls with the following additional headers: Proxy-Require: privacy Anonymity: uri Remote-Party-ID: <sip:41781234567@192.168.0.100:4000>;privacy=uri as opposed to Remote-Party-ID: <sip:41781234567@192.168.0.100:4000>;privacy=off when CLIP

Let''s say that I have a procedure that: * gets the number of bytes to write into some file * and returns the number of successfully written bytes def save( text, len ) This procedure is being used all over the place especially inside the method "process" which I want to test. Thus in order not to polute my filesystem I stub the "save" procedure. But of course in

Hello, I am trying to use * to handle anonymous ISDN callers. Something like exten => 5150/0,1,Congestion should work but doesn't. Apparently because the ISDN CAPI doesn't use 0 for callers who don't send their number. Is there a way to make * identify ISDN callers who use CLIR? -Walter -- Walter Doerr =*= wd@infodn.rmi.de =*= FAX: +49 2421 962001

On 05/16/2013 10:06 AM, Eric Christopher wrote: > On Thu, May 16, 2013 at 3:17 AM, reed kotler <rkotler at mips.com> wrote: >> On 05/15/2013 10:53 PM, Richard Smith wrote: >> >> On Mon, May 6, 2013 at 9:09 AM, reed kotler <rkotler at mips.com> wrote: >>> On 05/06/2013 08:51 AM, Rafael Espíndola wrote: >>>>> It's working fine just that

Hello everyone, The review http://reviews.llvm.org/D20951 implements initial support for the ARM architecture in LLD. To keep the patch size down, and to avoid the complexities of interworking between ARM and Thumb, there is just enough support for an ARM only Hello World to link and run on ARM Linux [*]. My main aim is to get this functionality committed as the basis of an ARM port and would

Hi, I've just read the postings regarding the interworking between * and SER. As these persons seem quite knowledgeable on this, I would like to have their advise on my planned installation: - I have broadband cable access - I plan to install a SIP-aware router - I plan to install a Linux server with Digium analog IF card(s) for connection to my analog line (incoming and outgoing) - I plan

Hi, Ive been playing on a asterisk to orion gsm box E1 pri setup. I have achieved incoming calls to be passed to my asterisk box successfully but outgoing calls will just I have tried playing with various pridialplan and overlapdial settings and with no success. If anyone can make more sense from the log, I'd certainly appreciate it. I am sending a 10 digit number to be dialed. I guessed

I've been working on supporting ARM/Thumb interworking thunks in LLD and have encountered a limitation that I think it is worth bringing up in a wider context. This is all LLD specific, apologies if I've abused llvm-dev here. TL;DR summary: - Thunks in lld may not work if they are added to InputSections that have already been scanned. - There is a short term fix, but in the longer term I

> ../llvm-gcc-4.2-2.7.source/configure > --enable-llvm=/home/anatolyy/qctp406/pakman/depot/users/anatolyy/proto/crosscompiler/llvm-2.7 > --enable-multilib --enable-target-optspace --enable-interwork > --with-newlib --with-gnu-as --with-gnu-ld --enable-languages=c,c++ > --target=arm-elf This means that the compiler is built for ARMv4 which is not pretty good supported. Try to switch

Hi, Thanks a lot. Is it possible to implement that functionality as a pragma? Ex. .. [code] ... #pragma A .. .. #pragma B .. .. Lets say I want to reserve registers X9 and X10 only within pragma A and B. Is it possible to achieve this in llvm? Thanks Nisal On Mon, Jun 12, 2017 at 9:54 PM, Tim Northover <t.p.northover at gmail.com> wrote: > Hi Nisal, > > (Adding llvm-dev back

Dear Ladies and Gentlemen, I am writing to ask your help with what may be an nmbd interworking problem. The situation is as described in the samba distribution documenet BROWSING.TXT. I have LANS connected by routers to a central site. FreeBSD 2.2.2R/Samba 1.9.17 nmbds at the remote LAN act as WINS proxy's to a a Samba WINS at the central site. All is well when the WINS proxy samba and the

I am looking to get the info about QSIG support in Asterisk. Does Asterisk have QSIG support? Does Asterisk support QSIG SIP Tunneling or QSIG SIP Interworking? If so, How to configure that? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060503/3cb7f966/attachment.htm

On Thu, Oct 13, 2011 at 11:25 AM, Joe Abbey <jabbey at arxan.com> wrote: > LLVM Supports: > ARMv4T  -> ARM7TDMI > ARMv5TE -> ARM926EJ-S >         -> XScale > ARMv6   -> ARM1136J(F)-S > ARMv6ZK -> ARM1176JZ(F)-S > ARMv7A  -> Cortex-A8 >            Cortex-A9 > ARMv7M  -> Cortex-M3 Does the LLVM code generator generate Thumb code in addition to

Hi all, on sourceforge.net I added the fixup release 0.5.4 of chan_capi-cm driver. The changes from 0.5.3 to 0.5.4 are: - fixed 'group' setting according to Asterisk defaults. - use SetCallerPres(prohib_not_screened) instead of CallingPres(32) for CLIR. - full CallingPres support added. - use mutex when debug/verbose messages are printed. - set dnid on incoming call. - catch errors in

What is CFU and CFNR? > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Michel Koenen > Sent: Tuesday, August 30, 2005 1:46 AM > To: asterisk-users@lists.digium.com > Subject: RE: [Asterisk-Users] How to use * and # as part of > numberindialcommand > > > From: "Damon

Hello, I'm using Asterisk 1.2 with MySQL support. I use sip_buddies table for SIP clients definition. My problem is that I can not define CLIR. Sip.conf docs says that restrictid = yes hide caller identification. The problem is that definition of sip_buddies field named restrictid is char(1). I tried to set restrictid = y, = 1 - no results. I changed definition of the filed to restrictid

Hello - Here's my first impression review of the first SIP 802.11 phone. I got my hands on the "first" one sold, so that perhaps makes me the first person to have a real 802.11 SIP phone commercially in the US interworking with Asterisk. Whee! Can someone point me to other commercially shipping phones to prove me wrong?