similar to: Detailed Instructions

Hello All, I have a problem. I have tried everything that is in the book "The Future of Telephony" as well as on the FWD (freeworlddialup) website, and there is still a problem. My asterisk box is not able to associate with the FWD server. I get: Registration Rejected by [insert IP], and I can't use my IPCall number to reach my Asterisk box. Any suggestions? -- -Shane Blog:

Okay, here's the dal. Me and my friend both have asterisk boxes. I want to be able to type extension 27 on my end and get his extension 27, and he wants to be able to type 277 on his end and get my extension 9999. We both have FQDN's, and would like to see about doing this either over sip or IAX... Any help much papreciated, Shane -- -Shane Blog: http://blind-geek.com/blog/ CoOwner:

Hello Asterisc-Users List, I am new to the list. I joined with a question in mind: How would you set up an asterisc box so that: (A) Someone dials a number (B) They are presented with a menu (C) Entering a number, like 1, connects a call to me. (D) I am on a mixing board, running an internet radio show. I want to run asterisc into the board, and run an output from the board to asterisc. Is that

Hi, Has anyone information about BRI hardware supported by 1.6 libpri ? In another thread, I was told a basic BRI card with HFC chipset (Bewan Gazel 128) was supported but I would delighted to lear about other harwarde (and specifically about Digium B410P). Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

TODAY, Friday January 4th at 12 Noon EST, 11 AM Central, 9AM Pacific, Mountain figure it out, 17:00 UTC Mark joins us to talk about IAX, the appliance, what's new in the asterisk worldwide communities and answer any questions you may have. Why not take this opportunity to ask questions or make comments? This conference is the largest *live* online meeting of asterisk users in the world. Each

Hi, I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. The problem I'm having is that for one I get no LEDs showing if the unit is in TE and NT mode (not a issue for me but may have some impact on things) I have no errors in any logs I

Hello, I am trying to install bristuff-0.3.0-PRE-1x.tar.gz on debian with kernel 2.6.19.2 and I've got some errors connected with XPP. I was wondering if somebody managed to install bristuff with this kernel or any kind of kernel 2.6.19. The bristuff mentioned above contains zaptel 1.2.10 not 1.2.12. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, kind of need help on the conference module, i'm using freepbx and enabled conferencing, i created a conference number, 6000. when i dial to it, my phone says it is connected but i'm hearing nothing, maybe logs below can help you. also, when i hang up the phone, the conference did not disconnect me. how can i end a conference? thank you -- Executing

What options are available for installing an asterisk system onto a bare-metal system ? Ones that I have seen: pbx-in-a-flash trixbox astlinux What I am trying to achieve is to be able to shove a cd / usb into a machine and have it install asterisk, complete with my .conf files. I also need Cepstral installing. Ideally, I would like to be able to mount an .iso file, chroot into it, and

I am following the guide here: http://updates.xorcom.com/astribank/bristuff/1.4/bristuff-current/INSTALL.html for installing bristuff on a CentOS5.11 box (stock 2.6.18-398.el5.i686). Whilst building zaptel I get the error as follows: CC [M] /usr/src/bristuff-0.4.0-RC4-xr7/zaptel-1.4.12.9.svn.r4649/kernel/xpp/card_bri.o In file included from

hello, Here (http://updates.xorcom.com/astribank/bristuff/1.4/INSTALL.html) you can read : cd qozap modprobe zaptel insmod qozap.o (for kernel 2.4) insmod qozap.ko (for kernel 2.6) ztcfg I thought modprobe was a replacement for insmod. Can someone be kind enough to explain : 1. the difference between modprobe and insmod, 2. why should both commands be issued, 3. how modprobe and insmod compare

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

Ok, I have spent all night trying to figure this out, and hopefully somebody has a similar experience. I have a very basic asterisk config. Sample configs, with the only addition being by SIP phone, and my incoming voip. Last week I got everything setup, calls were working, etc.,. I cam across a tutorial for voicemail, followed it, and it worked. When I call my phone and dont answer, it goes

I'm having trouble getting a xorcom set up. A large part of the problem is that the box is a _long_ way away and I can't get to/at it easily, so while I could probably fix this in a few hours if the machine were in front of me, I'm struggling over a slow unreliable laggy link. Ok, enough whining from me. I have a new Xorcom plugged into the usb of a Suse 11 machine I built Dahdi

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

Hi, all My Asterisk uses a Digium TE120Pand I would like to add an Astribank zaptel_hardware sees is, but I cannot get it working pbx:~# zaptel_hardware Argument "IRQ" isn't numeric in numeric comparison (<=>) at /usr/local/share/perl/5.8.8/Zaptel/Span.pm line 114. usb:005/002 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware pci:0000:04:00.0 wcte12xp+

I'm trying to use a Xorcom Astribank wth Ubuntu 8.04, but got no success. I can see the channel bank with lsusb, but when I tried to use zaptel_hardware, or when I try the /etc/init.d/script, they don't see my Channel Bank. I compiled the latest Zaptel 1.4.10, with Astribank's dependecies, fxload and libusb-dev. Anyone have a similiar experience ? Best Regards, -- Guilherme Loch G?es

I have recently updated from Centos/*1.2 to Ubuntu Server and FreePBX 2.8.0.2. We have an Astribank with 4 T1 ports and 16 FXS ports. After updating, we had it working for a while with one NT PRI and one TE PRI and, in the process of trying to configure another PRI, I ran into a couple problems. (1) As my configuration changes didn't seem to affect the Astribank, I power-cycled it. I

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00:

I have a server with 8 Xorcom Astribank, they're connected to the server via a USB hub, my problem is: when a reboot the server the ID of the Channel Bank changes, cousing a big mess on my server. Anybody know how can I solve this ? Best regards, -- Guilherme Loch G?es Visite nossa loja virtual: http://www.shopvoip.com.br Not?cias e F?rum sobre VoIP com software livre: