similar to: IAX2 failed to authenticate; it uses wrong name

I understood that a timing device (ztdummy if no zaptel hardware is present) was not necessary anymore with linux kernel 2.6. When I enable iax2 trunking I get this warning chan_iax2.c:8908 build_user: Unable to support trunking on user 'xxxxxx' without zaptel timing The linux kernel is 2.6.22-14-386 Can I ignore this message, and is trunking working despite this warning? The ztdummy

I am investigating an issue with IAX2 extensions in Asterisk 1.8.x. My application connects to Asterisk via AMI and attempts to run an Originate command between an extension (such as SIP/5555 or IAX2/8888) and an application (in my case it is AgentLogin). This works correctly for SIP extensions, in all Asterisk versions. With IAX2 extensions, this worked correctly in Asterisk 1.6.2.20, but

Using zoiper on a nexus 4, asterisk 11.5.1, sometimes we see failed authentication. The secret seems correct, so we can't figure out why we're getting failed authentication. But at the same time the device shows as registered: [Oct 8 18:14:14] NOTICE[510]: chan_iax2.c:11071 socket_process_helper: Peer 'n4' is now REACHABLE! Time: 441 [Oct 8 18:15:58] NOTICE[519]:

I'm having a little problem with voicemail. Actually I'm not getting the ability to leave a voicemail-message. This is part of the dialplan : > exten => s,n(voicemail),PlayBack(/var/lib/asterisk/sounds/voicemail/${ARG1}) > exten => s,n,NoOp(${ARG1}@boxes) > exten => s,n,Voicemail(${ARG1}@boxes) > exten => s,n,Hangup() > exten => s,n,MacroExit This is the

On Tue, Dec 23, 2014 at 6:51 PM, Joseph <syscon780 at gmail.com> wrote: > > > Most cell phone don't have a USB port but you are correct, maybe I just need > IAX2 soft-phone like: > Zoiper - it works on most of the platforms. I think Zoiper registers > directly with Asterisk IAX2 (if configured) as an extension, isn't it? If your cellphone is capable of a Wi-Fi

All, I have a simple question and a complicated reason for asking: Is it possible to change asterisk's source port for outbound IAX2 connections? I've tried using "sourceaddress" to no avail. I can set it to: proper.ip.of.box:4569 or 0.0.0.0:4569 and it works as expected. But if I try to set it to: proper.ip.of.box:5000 or 0.0.0.0:5000 it fails around line 8536 in

Hi I have configured IAX2 realtime in Asterisk 1.6.2.13. when I cannect a client to realtime extension, always the state of extension is "UNKNOW" like: * Name : marco Secret : <Set> Context : phones Parking lot : Mailbox : 2345 at default Dynamic : Yes Callnum limit: 0 Calltoken req: Auto Trunk : No Encryption : No

All, I run a bunch of (well 20+ actually) Asterisk boxes at home, work, friends and the lie with our own dialplan in the form 8EEXXXX where 'EE' is the exchange number and 'XXXX' is the extension number. This arrangement has been in for 2+ years and worked well with a central box (asterisk.thorcom.net) acting as the routing hub and SIP exchange point with various public

Hi all, I've setup two * servers which are SIP interconnected ala osaka/toronto from the * book (before anyone sugggests using IAX instead, no, I NEED to have them SIP interconnected for verification/test purposes). Then I have a Zoiper connected to one of them via IAX (so that * will not reinvite (?)). As soon as I try to call (via Zoiper) an extension on the other * I get a "Failed to

To answer my own message, I figured out a solution (untested) about 10 minutes after posting and leaving the office. Doh! Anyway, the solution (now tested) was to make the Asterisk server behind the NAT register with its peers. Despite reserving port 4569 in the firewall, that was not enough in this particular NAT firewall - it was only being reserved for one connection. Kind regards, Sebastian

Hello, I installed 1.6.2.17 version of asterisk. Set the user database to realtime. I have no problems with sip users. They can register talk etc.. With iax clients, they can register also.. And when they call iax to sip, it works. When they make an echo test..no voice received on iax clients. When they make call from sip to iax ..no sound received on iax clients. I didnt see any clue on debug.

The situation is one of my asterisk servers is behind a NAT firewall and one is not. Both servers have multiple IAX peers. The NAT firewall has port 4569 mapped through to the asterisk server behind. But, the natted server is almost permanently unreachable from this non-natted server, even though, the non-natted server is almost permanently _reachable_ from the natted server. Details are below

Im sure this has been thrown around this list 1,000 times, and Im sure its been around the net too.. But I have done everything, and cannot seem to get inward calls to be processed on my asterisk box.. First, Let me tell you what works: 1) Softphones (ZoIPer using IAX2 Protocol) Can make calls behind a Natted Firewall to the FXS Port, and it rings, and calls work full duplex. 2) Soyo IP Phone

A Polycom 550 and a IAX client (Mozphone and ZoIPer were used) are having a conversation. Call quality is reported as good except for an echo with a 3 second delay. Most of my searches are saying echo happens only on the PSTN piece, but there isn't one here. Can someone point me in the right direction? Asterisk 1.4.21.2 Under 40 users Quad-Core AMD Opteron(tm) Processor 2352 and 4G RAM

Using Wireshark I can see that ZoIPer always send a 160 byte payload. First few payloads contain 20 bytes of data (what I believe to be a mode 3 frame, ie first byte in 0x18 - 0x1F range), followed by 0x7B (21st byte), ie. 5 bit 0x0F terminator padded with 011. ... and then zeroes all the way up to 160 bytes. ... but then after a few payloads there are more following these 21 bytes ...

Hello guys! We released a new ZoIPer BIZ BETA (version 1.03). You can experience better look and more advanced features. Finally MS Vista fans can also make use of it. Zoiper BIZ BETA is available free of charge from www.zoiper.com. There you can find out more about the improvements and features. We are also offering customization packages for ZoIPeR Free Windows. Zoiper is a multiprotocol:

We have zoiper connected over iax to asterisk in Sydney. The call is to asterisk in New York. The caller in NZ can hear clearly. Nothing in NY. Here's the sydney server: -- Accepting AUTHENTICATED call from <zoiperipaddr>: > requested format = speex, > requested prefs = (), > actual format = ulaw, > host prefs = (silk16|ulaw|gsm|g722),

Greets all, I'm setting up asterisk and trying to get IAX2 running for FWD. I followed the FWD IAX2 page verbatim but I get the following error. May 14 08:09:31 WARNING[7569]: chan_iax2.c:5569 socket_read: Call rejected by 65.39.205.121: No such context/extension The rsa key is in, that's the only error I'm seeing when I try calling out with this. I haven't tried inbound yet.

Don't be afraid about the info that I'm going to post in this mail, but I want you to give as much info as possible. Also I want to show you what I've tried. What do I want When a voicemail-message is left via the Voicemail()-application, I want the .wav-file send to my mail-address as an attachment. My mail-setup I'm not using sendmail as MTA. I have msmtp as MTA and mutt as

Hi Everyone, Just trying to connect the Zoiper Communicator to connect to Asterisk which is behind Pfsense. Here is what I get at debug and it doesn't register. Error code 16. Can someone please let me know their firewall, NAT, outbound 1-to-1 pfsense settings as it seems to me I am doing something wrong on the firewall? *Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX