similar to: Asterisk is not adding Via field

Hi All, I am stuck with an issue in the Openser+Asterisk Forking. In this solution we are using Openser as the Registrar. Hence it will store all the contact bindings along with the q values for a given user, say ua1. The current setup is such that the INVITEs are sent to Asterisk by Openser and Asterisk sends out the INVITE. Now if ua1 is registered with two different contacts having

Dear ALL: I find a program named "asterisk_b2bua" on http://developer.berlios.de/projects/b2bua/ And I also download them(two components) and try to test it. But I have not enough knowledge about asterisk. It seems a Software PBX. Does asterisk_b2bua work? Does anybody ever try it? I have questions about my scenario. |======================> UA2

Hi, I have been experimenting with NAT and Asterisk a bit now. Though I have made progress along the way, I have come across the following problem. I'll really appreciate if anyone can provide me any help or pointers. Thanks! Successful Scenario: ------------------- All sorts of NAT calls are successful with full two-way media when both end points are locally subscribed users. Problem

Hi, We are using asterisk version 1.0.5. We have registered two UA's with asterisk. (Registration was successful) UA1 <-------> * <--------> UA2 Now, UA1 subscribes for UA2 to asterisk. asterisk sends NOTIFY to UA1 with UA2's state as open. But if UA2 gets un-registered then, asterisk is not sending NOTIFY to UA1. But when there is state change from UA2, asterisk is

Hi I have the following configuration | UA1 --|------ asterisk1 -----------------------+ UA2 --|------ asterisk2 -----------------------+ DB UA3 --|------ asterisk3 -----------------------+ UA4 --|------ asterisk4 -----------------------+ | All UA is located in the same area. A seperated PC is used as a centralized DB for storing a common dial plan, user account and register

This is not really a problem just something I noticed in my testing.. When two or more Asterisk servers are connected by IAX2 trunks it does not make use of any "shortest path" type system.. (maybe this is still planned somwhere down the line, but may come in handy to those who have multi asterisk installations) Here is the setup.. UA1--- Asterisk1----[IAX2 Trunk]---Asterisk2---UA2

[Resent due to non-descriptive subject line.] Hi folks When connecting two SIP users, is there any way to stop Asterisk from sending SIP 183 Session Progress messages, either globally or per-peer? Scenario as follows: Call from UA1 to Asterisk (UA2) to UA3. UA3 sends RTP before SIP OK to Asterisk (UA2). Asterisk (UA2) detects early audio from UA3 and sends 183 Session Progress with SDP to

Hi folks When connecting two SIP users, is there any way to stop Asterisk from sending SIP 183 Session Progress messages, either globally or per-peer? Call from UA1 to Asterisk (UA2) to UA3 UA3 sends RTP before SIP OK to Asterisk (UA2) Asterisk (UA2) detects early audio from UA3 and sends 183 Session Progress with SDP to UA1. Instead I would like it to just send on the early audio, is this

I have this configuration: UA1 ---> FW1 ---> Asterisk ----> FW2 --> Internet --> UA2 UA has provate address (192.168.x.x) Asterisk has public address I want to be reach somebody at the internet. My idea was that asterisk works as a Proxy. Then i would have a SIP/RTP connection between UA1 and Asterisk and an other SIP/RTP connection between Asterisk and UA2. (asterisk is

Dear ALL: My scenario lists below: Assume: UA1 with sip id "1011" And dial number to PSTN is "0939749xxx" There is no modification rule at my CISCO. (It will not change any dialed number) UA1 ==> SER ==> UA2 (SIP to SIP) UA1 ==> SER ==> Asterisk ==> CISCO 5300 ==>

I've got the following situation where a UA is trying to call another UA via Asterisk and SER according to UA1 -> * -> SER -> UA2. Now in the event that SER generates a 404 Not Found for UA2 I would like Asterisk to return or relay or forward or whatever the 404 to UA1. Anyone know this might be able to be done (or maybe not possible at all?) Craig

Hi all, i have a little problem to understand this warning message, it's annoying and it cause a lot of spurious in the log files. Im working with this scenario: a sip outgoing trunk (Trunk-out) that support only ulaw and all calls are always routed to this. a list of sip UAs that potentially can use any codec apart g729/g723. I setup the asterisk to do as mediaproxy so directmedia=no and

Hi everybody, I am trying to make up call flow diagrams for for a setup which include ser as a sip proxy/registrar and asteriks as a voicemail server. Is my sequence correct?: UA 1 send an invite to SER. SER forwards this invite to UA2. UA2 sends back a sends back a 100 trying and 180 ringing message. SER forwards these. However UA2 doesnt answer the phone,so what happens then?...is there a

Hi, It seems that the "switch" parameter has a priority in the dialplan that is higher than the wildcard extensions.. This I am finding to be a problem.. My setup.. UA1--[AST1]--{IAX}--[AST2]--UA2 | | PSTN1 PSTN2 I use switch on AST1 to connect to AST2... As you can see I have PSTN connections on both and also the IAX connection is not permanent.. I

Thanks Alex, some great ideas. I think, however, I'm leaning towards Asterisk at this point- since I have quite a bit of experience there, and very little with SER. At this point, I'm wondering from a dimensioning standpoint, what kind of capacity my machine will have (Dual Core Xeon 2.4GHz 4GB RAM). As I said, I don't plan to do any transcoding. I read the voip-info page on

Good afternoon everybody. I first would like you to excuse me for my english. I have an issue with a SIP call ID which is not changed in the call configuration described bellow : I have an Asterisk Server A using only SIP protocol. Behind A there are 2 distant clients (using softphone X-lite) C1 and C2 and a proxy server OpenSIPS (ex OpenSER) P. The idea is that when C1 want to call C2,

Trying to find a solution to a sticky problem here. We have 3 OpenSER systems. Phones register with the OpenSER systems, and after they authenticate the user, pass the registration info using OpenSER's send() command to all Asterisk boxes sitting behind them. Each asterisk system then knows about every phone. For this to work, I had to turn off authentication in Asterisk for both

Hello, everyone. I'm interested in one thing: as I know asterisk retranslates the media stream with the next way 1. Gets the frame with the UA1's codec 2. Retranslates it to slan 3. Ratranslates slan to UA2's codec 4. Send the frame It seems to me, that it follows these steps anyway, the question is: Will Asterisk retranslate the frame ua1->slin->au2, if the codecs of the 1-st

I am curious if it is advisable to use implement Asterisk as a Session Border Controller for a VoIP reseller environment. Users will terminate calls SIP to my server, which will authenticate them via RADIUS, perform a LCR lookup, select an appropriate trunk (based on LCR), and terminate the call (update RADIUS accounting at end of call). All while acting as a B2BUA to prevent the users from seeing

Hi asterisk, openser, ser users. I have to check video support between asterisk, open(ser) and rtpproxy . ASTERISK (b2bua+registrar server) | | | | SER + rtpproxy | | NAT | | sip agents (with video support) Both signalling and media channels are kept in the path of SER+rtpproxy and ASTERISK . I can