similar to: Only call me once

Hi, I've sucessfully completed an Openser 1.3.2 + Mediaproxy 1.9.1 + Asterisk 1.4 + CDRTool with freeradius telephony system. Asterisk is used only for voice mail and redirectioning calls. Every calls should pass through mediaproxy so that i can account them. The goal was to create a simple prototype of what could be a VoIP provider. Now i need to dimensioning this system to work

Hi All; I do not know if anyone faced such case in dealing with open vpn (as we need it for fring to be used from the mobile: Which mobile can be used to install the open vpn client on it, so we can use it to do a vpn channel with the server that has open vpn server? Regards Bilal

I have a customer installation with an Adtran DS3 mux. The DS1's go into my Asterisk servers that run IVR/Call recorders. The DS3 provider is Qwest, and they tell me that they routinely drop the DS3 service to redundant back-up's and that this is a common practice that happens thousands of times to DS3 lines daily across the US without any service interruptions. They say that the

hello all, i have 2 asterisk boxes on that 1 have public IP Address and another is only have local IP address now on public IP there are some 7 DID forwarded , now i want to forward 3 DID out of 7 DID to local machine we called server B , I know there are DIal , and Switch statement in asterisk , but is there any other convenient way to do this. because if call ratio is high then my call legs

Asterisk 1.2.24 seems to crash repeatedly under any substantial call load (and sometimes without a substantial call load - just one SIP leg is enough to do it) when using the G.729 pre-compiled binaries from: http://asterisk.hosting.lv/ As per: http://www.voip-info.org/wiki-Asterisk+G.729+Licensing Time to crash is variable, but seems to require at least an hour of production performance

Just an FYI for Digium. I received a mailing today from you guys which was nice. The price of mailing was ~$1.60 and inside was an inflatable beach ball. Cool, but I tried to blow up the beach ball and the the seam where the part opens to inflate the ball was not connected to the ball whatsoever, so it went right in the trash. I wonder if the sick heat had anything to do with it, was mine just

This is a global message to all to announce our callcenter / dialer / predictive dialer / vicidial program is now open. Codecs: G711, GSM, G729, G723 Protocols: SIP Duration Rate : 30/6 (6/6 with monthly minutes over 100,000) Channels : 100 to start with , more on demand. We are predictive dialer friendly , your account will not be shut off. Contact us to do a test run. Mike

Dear List; To have better security, how can I put a password on the international calls (if the user dialed the international call, then it will be asked for password to send the call outside)? Can this password read from the CDR file to know whom did these international calls (using which password? As I might have mutliple passwords). Regards Bilal

http://www.theregister.co.uk/2008/12/01/richard_bennett_utorrent_udp/ FUD? Interesting? Boring? New news? Old news? -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (706) 338-8599

I've got the ztdummy kernel module loaded and seem to have all the desired prerequisites in place, but Asterisk never seems to compile with MeetMe() application support enabled, nor does there appear to be a module I am failing to load that would contain this application. Is there something really obvious I am missing? Thanks, -- Alex Balashov Evariste Systems Web :

Is there a way to limit simultaneous calls. I like to limit simultaneous outgoing calls as more than few simulataneous calls are charged by my voip providers. However, I do not want to have any such restriction for internal calls. Thanks Jim

Hi all, I am trying to send an extra header in SIP INVITE Message , i.e (email="me at me.com") but when I check the Message at the target that header is not there So I is Askterisk altering the Message and Is there away to include extra headers for SIP INVITE Message? Thank u

I made a little write-up that attempts to synthesise a lot of the information out there about how to get HylaFAX working with Asterisk by way of IAXmodem for inbound faxing: http://blog.evaristesys.com/?p=24 Of course, there are bound to be some things I've left out or are grossly in need of correction. So, before I link it off the voip-wiki I am extremely eager to solicit the input of

Hi, all I want to add more than 200 sip accounts into sip.conf, username from 6000 to 6199, password is the same, i remember there is a better way to do this case, however, i have not searched the method yet. Anybody can tell me this method, TIA. BR Mike Li -------------- next part -------------- An HTML attachment was scrubbed... URL:

i am asked to implement a call center of 50 seats for my company , and i was wondering if Asterisk can fit this as a relaibale and low price system is it mature enough for this task?? best regards Gers -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090712/b5bab36d/attachment.htm

Dear, is any way to change , the size of voice packets? I want to increase the quality by decreasing the size of each packets, because of bandwidth failure. ? thanks in advance Mani -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081110/c1b2ed9d/attachment.htm

I installed asterisk, astguiclient, php and mysql. but when i dialled one number to another number my asterisk server give the following error: > /var/lib/asterisk/agi-bin/agi-VDAD_ALL_inbound.agi > install_driver(mysql) failed: Can't load > '/usr/lib/perl5/site_perl/5.8.8/i486-linux-thread-multi/auto/DBD/mysql/mysql.so' > for module DBD::mysql: libmysqlclient.so.15:

I have a Vitelity DID which generally works, but calls from a particular caller do not reach it. Vitelity has thus far disavowed any responsibility for working through this problem. I recognize that some action might be required by another provider which is outside Vitelity's control, but it seems that they should at least be trying to help resolve the problem by helping me determine

Really? Me? Oh Pavel! I would be inestimably honoured. On 04/27/2012 01:55 AM, Pavel Ismailov wrote: > Hello! > > My name is Pavel Ismailov > and I`m CEO of www.flashphoner.com project. > > We noticed that you quite active in Asterisk-user > mail list, and would like to offer you buy signature > in your messages for some monthly price. > > Is it interested for

I need to insert/update multiple MySQL columns in a single row with the func_odbc function at the SAME TIME. Someone showed me how to use ARRAY to retrieve multiple values at the same time, but I need to SET multiple values. Can this be done? If not, I will just stick with MySQL, but that's a pain in the ass because the asterisk-addons package has no default rpm spec file for building an