similar to: Needed Hardware

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hi All; I tried Firefly softphone with IAX and it gave very poor quality. Any one advise a good strong softphone that can work with IAX fine? Regards Bilal ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

hello guys, i am using acts_as_ferret plugin(0.4.1 Latest) with ferret gem(0.11.4 Latest) on rails 1.2.5 and ruby 1.8.6(UBUNTU Gutsy) i have this :Stores Model acts_as_ferret :fields => {:name => { :boost => 2 ,:store => :yes}, :short_desc => { :boost => 1.5,:store => :yes }, :tag_list => {:boost => 1

Hi All; Which is better (to have more stable or release versions) of zaptel, libpri and asterisk: to use cvs or svn? In case of using cvs, why I need to type: export CVSROOT=:pserver:anoncvs:anoncvs at cvs.digium.com:/usr/cvsroot In other words: what is the use of pserver, anoncvs, ... with cvs checkout? Note: How can I know all the variables needed for cvs checkout so I might need to do

Dears; To patch libpri: I just place the patch file in the libpri source directory and then I run make and make install? Or I need to compile the dahdi and asterisk also? If the problem stayed, do I have to go for previous libpri version? Or for previous dahdi version and asterisk version? Regards Bilal ----------- > bilal ghayyad wrote: > > But I am afraid it is a bug because I

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at

Hi all, Am setting up a internet cyber cafe of roughly 50 or so boxes running on CentOS 5.0. Now the question is. Does someone on the list know of a open source cyber timer/cybermanager which runs on CentOS(LINUX) and where i can download it? All that am getting are M$ based.(grrrh). Thanks. ------------------------------------------------- David Maina. Systems/Network Administrator. PdE-Kenya.

I make a file zpool like this: bash-3.00# zpool status pool: filepool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM filepool ONLINE 0 0 0 /export/f1.dat ONLINE 0 0 0 /export/f2.dat ONLINE 0 0 0 /export/f3.dat ONLINE 0 0 0 spares

hmm... your cut-and-paste looks like ascii, but is the cuesheet in utf-8? --- Ariel Arelovich <aarelovich@gmail.com> wrote: > Hollo I'm new, My name is Ariel Arelovich > > I've encountered the following problem trying to sue metaflac. I used > the > following command: > > c:\Archivos de programa\FLAC>metaflac >

Does anyone know where I can get an rpm spec file for zaptel 1.4.x? Thanks, Doug. ____________________________________________________________________________________ Be a better sports nut! Let your teams follow you with Yahoo Mobile. Try it now. http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ -------------- next part -------------- An HTML attachment was

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file

Hi List; Is there an Digium cards support GSM SIM cards so we can fix an SIM card to be used for calls within mobiles as it is less rate? Or I have to use an FXS to SIM adaptor? If yes, then anyone advise a models and prices? Regards Bilal ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo!

I am talking about the SIP. Now the new mobiles (Nokia, Erecson, Panasonic, iPot, ... etc) all of them support SIP capability. They are able to register to any SIP server (by giving the IP address, username and password). Fring is one of the software that can be installed on the mobile devices and can register on the SIP servers. BUT, the new mobiles currently come with built in SIP (no need to

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

I make a file zpool like this: bash-3.00# zpool status pool: filepool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM filepool ONLINE 0 0 0 /export/f1.dat ONLINE 0 0 0 /export/f2.dat ONLINE 0 0 0 /export/f3.dat ONLINE 0 0 0 spares

Hi all I don't have idea how to write this script, please help I have thousand records in this format. eg: file No.3 is File No: 003 Customer: Ann Email address: xxx at info Country: England Created by: 20071102 file No. 4 is: File No: 004 Customer: James Email address: xxx at gov Country: Australia Created by: 20071105 I need to write a

Hi All; Anyone knows if there is an Asterisk version that setup can be stored in Database instead of the configuration files (.conf)? Any advise? Regards Bilal

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

Hi All; Any one advise for open source prepaid billing other than A2Billing that can work with Asterisk and it is rich by features (for large business)? Regards Bilal