similar to: Odd bug in Siemens C460IP ?

Hello list, my case is as follows: SIP1--asterisk--SIP2. SIP2 is IVR type device. SIP1 and SIP2 both use g729. When SIP1 calls SIP2, it hears the IVR, and prompt the SIP1 to punch the keypad on the phone. As suggested by you, I need to configure the SIP1 with out band dtmf mode , what is about the sip.conf, should I specify the SIP1 with demfmode=rfc2238 ? do I also need to make same kind

Without using Dundi or SER, any thoughts on the following anyone? Has something similar been implemented anywhere so as to me not having to horribly butcher code... 4 servers SIP1-4 User1 -- -- SIP1 -- \ / \ User2 ------ Go to register ------- SIP2 ----- Whereis? --> DB / \ / User3 --

Hello list. When using SIP DNS SRV to define a production Asterisk server with high priority and a backup Asterisk server with a lower priority on this DNS-server, will this work as follow : - production server is reachable, so registration of the IP-phone goes to this server - production server is unreachable, so registration goes to the backup Asterisk server - production server is

Hi, I am trying to write dial plan for sip to auto answer (auto attend) the incoming call to the sip phone. - If i call from sip1 to sip2 then sip2 should automatically answer the call and play some sound file. I am trying to do this but as new to the asterisk dial plan configuration , so not able Todo this. help me if anyone already done this setup. Regards Upendra. -------------- next part

Dear all, I'd like to know if there is a way for multiple asterisk servers to share a common SIP and/or IAX registry. The setup I imagine would be something like : - several asterisk servers called sip1.isp.com, sip2.isp.com, ... - a DNS alias sip.isp.com pointing to all the addresses (thus providing a round robin resolution on each server) - each SIP client would register with sip.isp.com

> -----Original Message----- > From: Alexander Lopez [mailto:Alex.Lopez@OpSys.com] > Sent: Thursday, March 16, 2006 8:46 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Feedback from VON expo! Info on > *HAandPolycomphone!! > > > > > > "Q: What are the plans for HA? > > That's BS. Last time I

Hello, is it possible to rout ALL RTP Data over Asterisk, like SIP1 <---RTP---> Asterisk <---RTP---> SIP2 I know it seems quite useless. But I want to simulate a IAX -> SIP connection and have no Phonecard installed on my computer ;) Thanx, Kalle

Is it possible to split sip.conf into two files (sip1.conf sip2.conf)? I have an Audiocodes gateway with two FXO ports, and (according to info I received, and it appears to be correct) Asterisk find the peers based on their IP and not on their IP+PORT. Thus, Audiocodes with two FXO ports registered on the same devices (=> one single IP with different SIP ports), the last entry into my

Hey, You know, the Digium guys said both are good. They said the the DNS method is better because you dont have the extra point of failure (SER) but said the SER method is better in that it gives you more exact control in the handling of the calls and registration. They did acknowledge there would be a possible downtime only for incoming calls to users with dynamic IPs if the

Hi all. I have 2 ip phones (Grandstream Budgetone): -budgetone1 -budgetone2 All two are connected to an Asterisk server. When I make a call from budgetone1 to budgetone2, I can speak with budgetone2 whith no problem. But when budgetone2 hangs up, budgetone1 does not play any tone (like busy tone). Budgetone1 seems to be still in conversation, but what conversation! Has anyone had a problem

Hey, I am running default Asterisk 11.16.0 on a FreeBSD-Machine. I need to register to several other SIP-Services (actually 3): short sip.conf register => XX at a register => XX at b register => XX at c If I remember correctly this worked quite well, but I now checked the system again and it is only obeying the first register statement. "sip show registry" only reports the

Hello, I am experiencing weird problem in Asterisk 16.2, possibly a bug. Same thing works fine in Asterisk 11. Here is the situation: I have 2 extensions on 2 phones. 4 extensions in total. phone 1: 8882 8382 phone 2: 8884 8384 And I have 2 SIP trunks for outgoing calls. I want to call via SIP1 when called via 8882 or 8884, and SIP2 when called via 8382 or 8384. And one last detail. SIP1

Dear all, I am currently trying to configure a PBX make use of a multiple of outgoing lines, currently my extensions.conf looks something like below >> ; extensions.conf ; 20th October 2008 [globals] sip1=201 sip2=202 sip3=203 sip4=204 [general] autofallthrough=yes [default] [incoming_calls] exten => _89859715,1,Dial(SIP/201) exten =>

Hi All, I have 2 SIP clients configured and connected to Asterisk. When I place a call from SIP1 to SIP2, if both codecs are the same then everything works as expected. I then allowed one of the clients to use alaw instead of ulaw and there were audio problems (couldn't hear the other end, etc). Same thing happened when I tried to use gsm<->alaw/ulaw. Any ideas? I'm using

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

I have 2 sip phones and an analog phone attached to a Digium USB fxs device. I would like the analog phone to ring when transfers are made to it, but I don't want it to ring when a call comes in from outside, although I would like the person at that phone to be able to pick up the phone and answer the incoming call. Is that possible? Thanks Sean Garland, MCP+I, A+ Siskiyou Technology

Hey, all. I'm trying to do some fun with auto-provisioning of Polycom phones, and one thing that would make life easier for me would be if I could have a per-phone sip.conf file. If not, no biggie -- but if there's a way to do an include (as per extensions.conf) or something, that would be great. I've gone through docs, and an older version of "Asterisk: the Future of

Hi :) I hope someone has a hint concerning Early Media. The situation: My Asterisk is connected to small local carrier who works with several SIP servers. I traced some SIP headers and find something like this: Via: SIP/2.0 UDP sip1.provider1.de In the SDP part I found something like this: o=- 2268929 0 IN IP4 sip2.provider1.de c=IN IP4 sip2.provider1.de If I send

Hi I would like to send a text to the called person when he picks up the phone before the call gets connected through. Is there a way to do this? Example: I'm registered to multiple SIP providers. They come in to a context each and then get through to my phone. Now I would like to send myself an announcement about from which SIP provider this call came from. -- Beno?t Panizzon,

Hello All, I have 4 Broadvoice lines. If I call any of the lines it shows that is coming from the first line. exaple register=XXXXXXXXX1@sip.broadvoice.com:passwd:XXXXXXXXX1@sip.broadvoice.com register=XXXXXXXXX2@sip.broadvoice.com:passwd:XXXXXXXXX2@sip.broadvoice.com register=XXXXXXXXX3@sip.broadvoice.com:passwd:XXXXXXXXX3@sip.broadvoice.com