similar to: Dial problem

Hi. I am using asterisk 1.4 (latest as of today) and zaptel 1.4 (latest as of today) and I cannot dial out using my 400P card with one fxs module and one fxo module. I am using kernel 2.6.24 and get the following log entries: [Feb 25 17:28:13] VERBOSE[25071] logger.c: -- Executing [s at macro-dialout-trunk:23] Dial("Zap/1-1", "ZAP/4/www411|300|wW") in new stack [Feb 25

Below is a copy of my log, zapata.conf & extensions.conf that relate to the ZAP lines. Basically when we dial out it takes on 10-12 seconds before the ZAP line actaully picks up. I'm hoping to find out what the cause is for this as it's causing user grief with extremely long connect times, and I believe it may be causing issues of cross lines (an outgoing call gets mixed with an

I am new to Asterisk and the protocol/language complex world of VoIp and PBX. But I have a dedicated machine running A@H 2.8, a single TDM400P with one FXS module card connected to a standard analog phone. The second card is an X100P connected to my analog PSTN phone line. I also have Grandsteam IP phone plugged into the network and a couple of x-lite SIP softphones. I can make outgoing calls on

We have an asterisk box with the following configuration: - AMD Athlon XP 2400+ - 512 MB RAM - SUSE Linux 10.1 - a Digium card TDM400P with 3 FXO - another Digium card TDM400P with 4 FXS - asterisk 1.2.7.1 - zaptel 1.2.4 I already checked that those cards aren't sharing interrupts (by cat /proc/interrupts): 0: 14119786 XT-PIC timer 1: 10 XT-PIC i8042 2:

I am running Asterisk 1.2.14 and Zaptel 1.2.12 and using a Digium TE110P card in E1 mode. I've recently noticed in my logs the following Jan 5 01:27:11 VERBOSE[22490] logger.c: [chan_zap.so]Jan 5 01:27:11 VERBOSE[22490] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) Jan 5 01:27:11 VERBOSE[22490] logger.c: == Parsing '/etc/asterisk/zapata.conf': Jan 5 01:27:11

I've been monitoring this problem for almost a month now. I realized that it is more extensive than what I described previously. I can very easily replicate this problem on every Zap channel. Following is the senario: 1. Call Zap/5 via say SIP/15 -> Zap/5-1 created and starts to ring 2. Call Zap/5 via say SIP/21 -> Zap/5-2 created and starts to ring 3. Hangup SIP/15 ->

Hey everybody, I've, within the last 3 weeks, moved over to a PRI from SBC/AT&T. I've received several complaints about dropped calls. Reviewing the archives on PRI and dropped calls shows that I should set the resetinterval=never in the zapata.conf and restart. This hasn't helped. The dropped calls have to date only been on outbound calls. Usually within 2 to 3 minutes

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

Hello, When I start Asterisk, I get the following in my log (/var/log/asterisk/full): Mar 15 17:16:55 VERBOSE[4242] logger.c: == Parsing '/etc/asterisk/zapata.conf': Mar 15 17:16:55 VERBOSE[4242] logger.c: == Parsing '/etc/asterisk/zapata.conf': Found Mar 15 17:16:55 DEBUG[4242] chan_zap.c: Failed to read gains: Invalid argument Mar 15 17:16:55 DEBUG[4242]

Did you compile and install libpri *before* Asterisk? I had same problem (among others) b/c I didn't install in the correct order. Try the awesome asterisk_update.sh shell script. Are you trying to emulate CPE or NET? Try signalling=pri_cpe Check for whitespace behind the statement, zapata.conf seems bitchy about whitespace. hth -----Original Message----- From: Steve Totaro

Hi, Does any one experience that SIP phone to SIP phone (Polycom phone) calls can't hear each other, but Monitor application records both end's voices. It also happens in group pickup calls. Zap calls to queue (Local channel) also experience this problem (sometimes, our SIP phone can't hear any voice from incoming Zap calls when pickup, sometimes this happens after 10-50

Any ideas? 51] logger.c: [chan_zap.so] => (Zapata Telephony) Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing '/etc/asterisk/zapata.conf': Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing '/etc/asterisk/zapata.conf': Found Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing '/etc/asterisk/zapata-auto.conf': Sep 28 00:42:35 VERBOSE[5151] logger.c: == Parsing

Sorry I should have stated that I've tried +x, -x, x.y and x and I still get the same. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric "ManxPower" Wieling Sent: 05 January 2007 08:10 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users]

Hi!I've this problem to another asterisk@home machine, without digium cards, but only with a bri isdn card.It doesn't connect in the amportal graphical,(it's stopped), if I make tha amportal start command this is the result: STARTING ASTERISK Asterisk ended with exit status 1 Asterisk died with code 1. Automatically restarting Asterisk. Asterisk ended with exit status 1 Asterisk died

hi i'm trying to configure a TE205P on asterisk@home i've edited /etc/sysconfig/zaptel adding this line: MODULES="$MODULES wct2xxp" now, when the system is loading, i can see that the wct2xxp module is loaded correctly but if i try the command: /usr/local/sbin/genzaptelconf i get: STOPPING ASTERISK STOPPING FOP SERVER Generating '/etc/zaptel.conf' Generating

Hi - I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't make it work- currently, asterisk will not startup because of a bad module. Below are some log files/config files. If anyone has any suggestions, I'd appreciate it. I used Trixbox 2.0 and followed instructions on (http:// sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems running through or

Hi There. I have the following setup : Asterisk 1.2.4 , freePBX 2.0.1, spandsp-0.0.2pre24 My problem is as follows : If I set up a very simple extensions.conf. when I dial from a fax machine, it seems as if no fax is being recognised. If I answer the call, I can hear the fax machine beeping. extensions.conf :

Hi, sorry for the long debug output below. I configured Asterisk with AMP to send the whole number including the extensions of the callers to the called party. Whatever I configure in AMP it looks like it is used, In my eyes it is ok, but doesn't seem to work. 033811234451 is the call id i configured, and it seems to use them, but the caller will only see a 0338189040 instead of my

Hi What causes deadlock? Apr 5 14:02:43 WARNING[2413] channel.c: Avoided initial deadlock for '0x82acb10', 10 retries! Apr 5 14:02:43 WARNING[2413] channel.c: Avoided initial deadlock for '0x8298160', 10 retries! Here is the portion of the log: Apr 5 14:02:42 NOTICE[23363] chan_zap.c: Got event 18 (Ring Begin)... Apr 5 14:02:42 VERBOSE[23363] logger.c: -- Executing

hi, after upgrade from 1.0.x to 1.2.x i cannot send faxes my topology: PSTN<-wct4xxp-asterisk- -sip- ata (ht496,ht488,asus vp100) - samsung sf2500 fax log: Feb 13 23:50:35 DEBUG[27914] chan_sip.c: Allocating new SIP dialog for 20d700003cb20000@192.168.1.209 - INVITE (With RTP) Feb 13 23:50:35 DEBUG[27914] chan_sip.c: **** Received INVITE (5) - Command in SIP INVITE Feb 13 23:50:35