similar to: SPA-2100 into Paging System "Hangs"

I just bough a Sipura SPA-2100 to use with Asterisk. When I use the analog handset plugged into the SPA-2100, the person on the other end can hardly hear me. I check the SPA-2100 setup and their is no mic/spk gain control. Is this a problem with the SPA-2100 or with Asterisk? Any way for asterisk to compensate for the poor audio level (if the problem is the SPA-2100)? Thanks, Mike

Hi, I'm looking for a full list of xml provisioning variables of the SPA-2100/3000. Currently the Sipura website has example XMLs only for the SPA-841 [1] and SPA-941 [2]. I'm mostly interested in the CallerID type selector variables and whatever variables control the PSTN<->VoIP settings. Sipura Configuration website form field names are numeral only. :( [1]

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able to pick IVR items with DTMF reliably. The

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

I have been looking into how to setup distinctive ringing on a SPA-2100. So far the only thing i have been able to find is how to define a distinctive ring in the spa config. What i cannot figure out is what SIP message i need to be sending to it in order for it use the ring. I did find out how to add the sip message for distinctive ring i just dont know what variable needs to be passed in order

Hi Friends, I have successfully implemented Intercom, Voicemail and International dialing using Asterisk. Now I want to connect my PSTN Lines to Asterisk server. I have 3 PSTN number (lines) to connect to Asterisk. For this, I want to use Sipura SPA-2100. Is my decession is correct or not? Is there any disadvantages with this Sipura SPA-2100? Please tell me. Thank you. Regards, Chandramouli

sorry to be a little off list, but I am provisioning sipura spa-2100 with firmware 3.2.1 Finally they got it working with fullduplex ethernet wan. The wan ethernet mode can be configured only by provisioning but I didn't find the provisioning field's name and the possible values. Is there some one that has just done it? thanks Rosario -------------- next part -------------- An HTML

This post is simply documenting a spouse-friendly way of using the spa-3000 as both a fxs and fxo port for basic soho environments in the US, allowing asterisk to participate as needed/wanted. All home phones are connected _only_ to the spa-3000 fxs port. The incoming home pstn line is connected _only_ to the spa-3000 fxo port. Defined Line 1 (fxs) to register with asterisk via sip (extn

Hi list, After successfully configuring Linksys SPA3000 and SPA3102 devices as Asterisk PSTN gateways, the only thing I can't get working is the PSTN Caller ID. The analog and SIP phones I've used can both display CIDs for internal calls, while the analog model also displays CIDs correctly when attached directly to the PSTN line. However, when PSTN calls come in via the SPA

Sorry if this was posted yesterday, I was having issues with being auto-unsubscribed because of my spam filter. Not sure if my post made it through. Hi everyone, I'm wondering if I'm missing something obvious here, or if Asterisk just doesn't support what I'm trying to do. It seems like it should be simple, but appearances can be deceiving. I've got an Asterisk box

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

I've a problem. I've some spa3000 and spa2100. Asterisk 1.2.4. Prefered codec g711u in both. Calleng from a fxs of spa2100 to the fxo of spa3000, all works ok. Then I call from a sip phone configured for using g729, to the fxo of spa3000, it also works ok. The problem is that after this, when, making again a new call from spa2100 to spa3000, spa2100 receives only white noise. I suspect a

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,

Hi to everybody, I have an spa 3102 where i connected an analog phone (in the fxs port) and the pstn line (in the fxo port). This is my problem: the incoming call doesn't arrive to asterisk. In the spa web page i configured this dialplane: (<:line01@192.168.1.220:5060>) where line01 is the context in sip.conf, 192.168.1.220 is the asterisk ip and 5060 is the asterisk sip port.

Hello, I've been experimenting with Asterisk 1.0.6 and a Sipura SPA-3000, and I've run into a couple of questions I haven't yet found clear answers to: It appears that the SPA-3000 has no call progress on it's FXO interface? Asterisk considers a dial() as answered when the SPA-3000 has dialed the number on the PSTN line, not when someone has answered a phone on the

Hi All, I'm on of those brave souls who bought into the preproduction beta of the Sipura SPA-3000 FXS/FXO adapter. I've had the unit a few days and am exploring it's workings. I really want it mostly as a straightforward FXO adapter, to replace an X101p. Let me be clear, I'd love to support Digium in every way possibe, and will likely buy a TDM40 card shortly. But, the X101p has

My SPA-3000 finally arrived and I'm trying to get the FXO port on it to work as if it was a X100P card as far as Asterisk is concerned. I have Asterisk dialing out over the SPA-3000 FXO port no problem. The issue I'm having problems with is having the SPA-3000 automatically forward all incoming PSTN calls to the Asterisk "mainmenu" context (or ext I guess). Currently the

I've been trying to get fax reception to work using an SPA-2000 to ring the fax machine or modem that's taking fax calls. I was curious if anyone else had tried something similar, and if so, had any luck getting it to work reliably. I've been able to get it to work, but it isn't reliable. (Pages/lines of black dots result more frequently than not.) The incoming lines are FXO

I've just made an interesting observation that I'd like to share with you all: the popular Sipura SPA-2100 just doesn't seem to be as great as I'd hoped. I've been trying to get inbound AND outbound faxing working via Asterisk and at least one of my termination services: Voicepulse or Sixtel. In general, inbound has been working flawlessly but outbound has been pretty