similar to: asterisk integration with panasonic analog pbx

Hi, We had modified some configuration in our cisco 800 series router. We set all the UDP packets from our servers to ip precedence 5 and also allocate 75% of bandwidth for UDP packets. However we still facing latency and low volume problem. Is it our 512k outbound bandwidth not enough to handle it? Thanks Regards, jorain ----- Original Message ----- From: jorain To: asterisk-users

Hi Guys, I'm looking for a light on the next problem integrating an Asterisk server with a Panasonic PBX using a PRI. The follow config has been working for two weeks and works almost fine, except for some little problems... 1- PSTN provides the E1/PRI (EuroISDN) 2- Asterisk receives the PRI 3- Asterisk provides a second PRI to Panasonic 4- Panasonic receives the asterisk PRI People can

We have a setup running Asterisk interconnected to a Panasonic TDA200. The Asterisk server has a two port E1 card, one connected to the phone company and the other to the Panasonic. Everything is running fine and we can send and receive calls from the Panasonic and phone company. We are using MFC/R2 for both links on Asterisk 1.4.4 and Zaptel 1.4.3. The only detail we have is that we cannot

Hi, Anybody have an idea how to integrate * with a Panasonic td-1232? We one at the main office, and are installing * in a branch office. We'd like to be able to make calls from * extensions to Panasonic extensions and the other way around. Making outgoing calls from extensions one one side to lines on the other would be nice too. I can put another * machine at the main office, but what is

Dear Pals One customer has a Panasonic PBX KX-T336 with 60 ext. and a E1 (R2) for Trunks working perfectly now, This customer has 10 wireless links to his branches, wireless working great now, no voice at the present MY IDEA : T1Card into the Panasonic (additional to the E1) connected to a T1 Digium Card into Asterisk as far as I know the T1 Card can be configured as E&M to act as

Hello! I have following connections over isdn pri: avaya definity---pri--asterisk--pri-panasonic 500 Just because panasonic 500 can't send user's names. I also want to have reverse callerid for avaya users. But if there is no answer in dial plan: exten => _XXXX,1,Set(CONNECTEDLINE(name)=${DB(names/${EXTEN})}) ;exten => _XXXX,n,Answer exten => _XXXX,n,Dial(DAHDI/g4/${EXTEN})

Hi all, We are using - a dell sc440(Single dual-core intel xeon 3040, 1.86GHz,1066MHz front size bus 2MB cache) as the asterisk server - dell 400sc(Intel P4) as a SER server - digium isdn card, TE120P at Asterisk server - Bandwidth: 2Mbps/512kbps All SIP Phones are registered to SER server, and SER will route all outgoing calls to Asterisk server. My problem is the sound quality goes down if

hi, anybody know how to make a sip trunk between trixbox and panasonic kx tde 100? i've tried, but always failed when calling from trixbox to panasonic. thanks,,, -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130312/1dd5170b/attachment.htm>

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax Thanks in advance, Regards, Ikka - Jakarta, Indonesia -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear Harry, Thx for the explanation. My team manage building's PBX that use Asterisk 13.x. We use Asterisk PBX for this buildings that have apartment and office customer. >From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter (cisco SPA112). Others are using PBX like panasonic analog, audiocodes SBC, etc, and we use ATA Converter to convert from SIP to Analog (CO Line)

Im a 3-days-asterisk-newbie. In 3 weeks, I must have a PBX installed in a new office of ours: Panasonic or Asterisk. Asterisk would be, if I can emulate some Panasonic functions on Asterisk fast, to convince the executives. What I have done until now: Bought 1 Linksys pap2 (2 FXS), 1 Linksys SPA3102 (1 FXS + 1 FXO) for making asterisk tests. Configured Asterisk/Fedora 9 so I can make SIP->PSTN

I have a client who has a Panasonic Hybrid system. They are taking in another company as a building tenant and the tenant will be on a new 12 station Asterisk system. This new asterisk system will have 4 FXO ports plus ITSP. The two systems will be separate except that they should tie together for the purposes of dialing extensions directly on the opposite phone system and for transferring

I want to replace a Telebutler software auto attendent system that used a 4 port Dialogic board connected to a Panasonic KXTD 1232 6 line system. We have spare computers here. How do I connect asterisk to this Panasonic system? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Is it possible to connect the Panasonic KX-T7665 IP phone to Asterisk? Kind regards Michael Felder IT Medic Australia Pty. Ltd. P: 03 9557 2213 F: 03 9557 2214 M: 0419 568 217 E: Michael@ITMedic.com.au http://www.ITMedic.com.au Keeping your computer systems healthy.

Hi. I've searched the archives and found nothing regarding collaborating Asterisk with a Panasonic PBX (TD1232 to be exact) Here's my question: Can I use a Wildcard X100P to connect an outgoing line jack (on the Panasonic) to Asterisk, so I can route calls from the PBX to Asterisk, and calls from Asterisk to the PBX? On the hardware page for the X100P card is says it's great for

Panasonic PBX KX-TDA600 it doesn't support SIP protocol for VoIP technology it only support H323 Trunk through 4 or 16 channels gateway card and TDM technology with ISDN BRI and PRI card. Mc GRATH Ricardo

Last week I asked about MWI indicators on wireless phones that would work with Asterisk. I sent a message off to Panasonic asking them about it because in their ads they specifically stated that the indicator works with and requires phone company voicemail subscription. The is the model TG5631. Specs here... http://www.amazon.com/Panasonic-KX-TG5631S-GigaRange-Cordless-Answering/dp/B000F4C2CA

Hello We have around 50 phones in our company, and I am playing with the thought to gradually go over to using sip services and ip-phones internally. However at first I would liked the Asterisk just to sit between the phone line and the Panaosnic, so I can take out one lin/number at a time to use ip phones. I am new to Asterisk, and haven't done much configuring of the PBX either. So I also

Hi all. I`ve installed a X100P on my box and is working well with incoming and outgoing calls as a trunk with one PTSN line. I want to connect the X100P to my Panasonic 616 EASA-PHONE as an internal extension to permit to users to make calls to SIP devices from analog phones, the problem is when I dial the ext number where the X100P is connected I get busy tone. What config I need to change to