similar to: Unlocking Cisco 7921

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Hello everybody, im newbie in VoIP, but find this project asterisk very interesting, i tried to install and its a great sw, i really get sorprised about all of its functions, we need to use the asterisk server in conjunction with cisco callmanager. We have a Cisco Callmanager 4.1 and the clients are softphones from cisco IPCommunicator, but all the support service of our company are linux

I have a Cisco Call Manager - and need to use the IVR Feature from Asterisk. My extension is 400 and I am calling 558 on Asterisk In my extension.conf I have these lines : exten => 558,1,Answer exten => 558,2,Playback(message.wav) exten => 558,3,Dial(SIP/439@CallManager) When I call 558 I heared the message then Asterisk tries to call 439 on CallManager but with this error :

Hi, ? I am currently trying to get a Cisco Callmanager 4.1 and an Asterisk server (1.6.2.21) to talk via a SIP trunk so I can use the Voicemail component of the Asterisk (all the phones are associated with the Callmanager). The connection seem to be there. When I do a "sip show peers" on the Asterisk server?I see the Callmanager as Monitored and online however I can't get any calls

Off topic, but involves an Asterisk deployment in a roundabout way. Anyone here intimately familiar with Cisco Callmanager (Version 4-5), that can tell me where a directory of the standard system voice prompts for Callmanager might be obtained? I am looking for the text and filenames of the standard prompt set that ships with Callmanager, have been all over the Cisco site and I can't find it.

Hi folks, I know this isn't an Asterisk question, but I'm really desperate and wondering if someone could help me. I apologise for the off-topic post. Cisco phones connected to CallManager can forward calls. But when they do, CallManager conserves the originating caller's ANI in the new leg that is built. I cannot find a way to get it to rewrite the ANI to be that of the phone.

Hi, I did a standard i386 install of 5.2 on a test machine. Then I ran the following command yum install \* and got the following error. Error: Missing Dependency: pilot-link-devel >= 0.11.8 is needed by package gnome-pilot-devel Checking my local repo and my usual upstream mirrors for pilot-link-devel it's not there. [root at thomond CentOS]# locate pilot-link-devel | grep

Does anyone have any input into integrating asterisk with a alcatel 4400 PBX. Acording to what i've found is that Alcatel uses R2 for E1 -- regards Vikram (http://www.vicramresearch.com)

Hello We have integrated cisco callmanager 4.1 with asterisk and we can dial from cisco to asterisk but we're getting an error if we call from asterisk to callmanager. This is the error I'm getting anybody can help me? Verbosity is at least 3 -- Executing Dial("SIP/2234-e084", "SIP/cme-pbx/4455") in new stack -- Called cme-pbx/4455 -- SIP/cme-pbx-25ae is

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

I am new to Asterisk and currently work mainly with Cisco Callmanager. With Callmanager I can setup partitions and call search spaces to determine where a given phone can and can't dial. Does Asterisk offer this type of functionality, and if so how? Blake Parker -------------- next part -------------- An HTML attachment was scrubbed... URL:

Callmanager does nothing than construct and tear down calls and the actual RTP stream does not flow through the Callmanager but is direct from IP device to IP device. How does this work with Asterisk? I read something that lead me to believe that Asterisk has to process the entire call, is this the case? Blake Parker CCNA Network Engineer Alacare Home Health & Hospice, Inc. Email:

Hi..... I have just successfully setup Asterisk with 2 Cisco 7940 phones (converted for SIP) and a SIP softphone on a W2K box.....and it all seems to work very well.....to those who wrote this software, it is really cool. Anyway, I am new to this software, and I have a lot of questions which I am hoping someone on the mailing list might be able to answer for me.....I am basically trying to

I am trying to get JPilot working. I have configed gnome-pilot-applet, but it is not talking to the USB connected Treo650. My Treo has my name as the user, so from the applet, I see also a userid (my UID on this system it seems). I try to put that on the Treo and nothing happens. I have enabled the Backup Conduit. I am using /dev/pilot, which shows up when my Treo is connected via its USB

Hi, Where can I find information on H.323 for Asterisk and/or integration with Cisco CallManager in particular? <http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration> I have oh323 working on Asterisk. Since the CallManger I am working with is running 3.3.3 I cannot use SIP... Thanks, Adi

I would like to setup Asterisk for voicemail with CallManager 3.3(5). I would like to know what would be the best Distro of Linux to use and version, what version of Asterisk works best to interact with CallManager, and what H323 ChannelType works. As you probably read in another thread I tried FC5 with Asterisk 1.4 and OOH323 (included with the addons package). This doesn't seem to work to

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

* compiled from cvs, i am trying call ip phones in callmanager 3.2 10.17.0.2 is my callmanager i noticed from network dumps that instead of sending rtp to the ip phone, * sends it to 10.17.0.2! thereby causing no audio from * to ip phone. audio from ip phone to * is ok. only callmanager calls fail. netmeeting works ok... here is the debug, thanks for any info ~kelvin H323 debug enabled --

Hi, I'm having trouble getting my Palm to sync with jpilot on my Centos system via USB. When I sync, I get this error in jpilot: pi_accept Illegal seek Exiting with status SYNC_ERROR_PI_ACCEPT Finished I have jpilot syncing fine with this Palm over the network, BTW. For USB, I set things up for udev as described on various websites. Here are the relevant ports & symlink (created