similar to: Cisco Phones

Hello List, Does anyone have access to the soft key configuration files for the Cisco 7911/7941/7970/7971 phones? Checked up on the Cisco site and didn't find much up there. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part

Just wondering if this is possible: Make a call from a registered sip extension (Doesn't matter if it's internal or external) during the call press a key sequence let say *90 to start recording call. When the call ends the recording automagically goes to their voicemail. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee,

I've been reading up on followme app for asterisk 1.4 and I have it working but I was wondering if the following was possible: Based on followme.conf present the caller with the option to locate the person: Call comes in (external or internal) and rings extension with followme configured. Before the followme app is initiated the caller is prompted to locate the person (by pressing 1 which

Hello List, I'm looking at the page command. I was wondering if there was a way to set a wild card to dial all registered sip devices. For example page all 1XXX extensions. Thanks in advance Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next

Is there a way to tell asterisk to beep every few seconds rather than play MOH. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list, Can someone outline the steps for selecting OSLEC canceller in 1.4.6? I know there was a bug fix for this but I can't figure out how to select it. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part -------------- An HTML

I'm not sure if anyone has done this before or not but, I was able get the Cisco IP Communicator soft phone to work with Asterisk using SIP. Thought I would share my experiences. The key is on the installation. To have the software use the SIP protocol type the following command: "msiexec /i CiscoIPCommunicatorSetup.msi /qb SIP=1". After installation configuration is just like

Hello List, For those of you using Cisco phones, did you have to purchase a 'SIP license' for each phone? Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy at manistee.org -------------- next part -------------- An HTML attachment was scrubbed... URL:

Just wondering what web GUI people like for asterisk. I installed asterisk from source and I was looking at possibly installing web GUI for system management. So far freepbx.org looks promising anybody else have any suggestions. Thanks Roy Anciso Director of Technology Manistee Intermediate School District 1710 Merkey Road Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-723-1690 roy

Hello List, Not sure if this will be helpful but I made changes to the original Cisco directory.php.txt script and applied them for use on the Polycom phones. This will create an extension directory and alphabetize it based on the sip registrations you have setup in sip.conf. Note that this only seeds the phones and does not synchronize them. Anyway thought it might save people some time. To

Hello List, We purchased a TE120P card from Digium and it works great. The only problem is that we are still experiencing echo on some calls. I've tried various echo cancellers (right now we are using OSLEC) and still no luck. My question has anyone gone from the TE120P to a Sangoma A101D-X Single Port T1/E1/J1 w/ echo cancellation? Have you noticed a difference? Also I called

Hello List, After seeing a few positive responses for the Linksys SPA-942 phones I was hoping to get some answers on the following questions: * How do the phones handling system wide paging? Is it similar to the Polycom phones? * Can a corporate directory be configured with the phones using Asterisk? * How is the speaker phone quality? Thanks Roy Anciso Director of Technology Manistee

Anyone use the LDAP feature yet on the polycom phones? If so how well does it work? How are you using it in your environment? http://polycom.com/usa/en/products/voice/desktop/soundpoint_ip/applicati ons/corporate_directory_access.html Roy Anciso Director of Technology Manistee Intermediate School District 772 East Parkdale Avenue Manistee, MI 49660 Ph: 231-723-4264 Fx: 231-398-3036 roy at

I'm trying to understand something that just doesn't seem to compute. How can companies like Cisco justify selling their hard phones for as much as they do? I know there is a matter of recouping R&D costs but when you look at the iPhone with all its amazing features for less than $500.00 it just doesn't make sense. Am I the only one that thinks this? Roy Anciso Director of

phones or extensions in the system. On 3/12/08, Anciso, Roy <roy at manistee.org> wrote: > Is there a limit on how many phones you can use? I couldn't find > anything on the website about this. > > > > ________________________________ > > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joshua

I am wondering if anyone has sample XML config for the Sipura 2100 ATA. We have been autoprovisioning our 2002s with success and the 2100's take the same XML that we have come up with, but I am not sure of the syntax for specific things that I need these boxes to do, such as turning T.38 on. If anyone is willing to share their xml for autoprovisioning Sipura 2100's, it would be much

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for

Dear List, If any of observed and/or expected data has less than 5 frequencies, then chisq.test (Pearson's Chi-squared Test for Count Data from package:stats) gives warning messages. For example, x<-c(10, 14, 10, 11, 11, 7, 8, 4, 1, 4, 4, 2, 1, 1, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1) y<-c(9.13112391745095, 13.1626482033341, 12.6623267638188, 11.0130706413029, 9.16415925139016,

Hi I am trying to setup asterisk to do a mass deploy of some snom phones. I can't find where i configure asteriks to listen to the multicast address, nor where to set the notify reply. I was hoping to not have to use dhcp options alex -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc:

Dear all, I need to process large amounts of data (two or three variables for 6,000 cases) cluster analysis. In the end I need to fill the source data to the obtained clusters. I need to trace the sequence of data fusion. In this case, I can fill in a cluster (with any level of linkage distance) by data. This procedure is implemented in the package Statistica, but this package can not work with