similar to: register => to let Asterisk register to another softswitch via SIP

help me in another issue related also to registering asterisk with another softswitch: A) If nat=yes, then I have to set canreinvite=no to be able to register, correct? B) In case of using firefly softphone, how it possible to set it to have nat=yes (at the firefly it self and not at the sip user configuration section)? As most of the sip endpoint give an option to set nat=yes and so on, how it

Dear List; I am trying to create a link between Asterisk and My softswitch, the link to be SIP Trunk. I did the below configuration and I do not know if any one can help me and advise me to have better configuration to be sure that link is fine. But I do not know how to determine the SIP username to be sent for my softswitch as sometimes the softswitch need to check it. Also, does asterisk

Hi List; If I need to do a trunk between Asterisk and another SIP softswitch (so Asterisk will send a SIP calls to that softswitch), then I have to configure this on the sip.conf file or where exactly? And is it the same when I configure iax trunk? Should I determine the context in this case for this SIP trunk? Regards Bilal

Hi All; Alot of softswitches or PBX's does not accept to manipulate any SIP call without being registered firstly. So that means, I need asterisk to register firstly then I can route my calls to that SIP trunk. In IAX2, we use the register => , so what shall we do in Asterisk? And how its format will be (if we will use register)? Or what is the solution? Regards Bilal

Dear all what is softswitch what is difference between asterisk and softswitch ?? regards satish patel --------------------------------- Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings, and more! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello averybody, I'm looking the softswitch in digium website, anyone test the softswitch? Best Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071202/2440f782/attachment.htm

I've been working in the VoIP industry for just a bit over a year now... Mostly taking care of the underlying systems. I've now reached the point where I'm being drawn more and more into the call processing side of things. My background is in computer and "classic" telephony systems (DMS250/MTX, DSC 400, T1, channel banks. telabs analog echo supressor modules and

Pardon my ignorance, but I was hoping someone could clear up something for me. - For a few POTS lines, digium has a single port card for that, or a T1 card to a channel bank. - For 10 or more lines, digium has a T1 or E1 card for that too based on PRI channels - For 100's to 1000's of lines, I suspect a soft-switch is in order??? A traditional phone company will sell: - POTS lines for

I'm confused a bit about the following and was hoping to get some answers on this group - What is exactly implied when we say asterisk can connect to a PSTN. Does it mean connecting to the PSTN via PRI/T1/E1? If yes, then I assume asterisk does not need to do any SS7 signaling and all it does (playing the role of a PBX) is to connect to a Class 5 Switch at the CO. Is this a correct statement?

Hello everybody, Im new to the list and also new to asterisk, Im wondering if I could set up asterisk as a softswitch, I guess for what I've been reading that It could be possible but almost all the info and documentation Ive found so far is about asterisk as a PBX, etc. Im willing to set a small voip wholesale traffic bussiness and Im not quite sure asterisk is the right chocie for that.

As an example....if we have a call that: 1. originates via PSTN line to one of our local DID's in Seattle 2. comes into our Asterisk server in Los Angeles or Denver 3. is routed by Asterisk for termination back to a different Seattle PSTN ....and if our VOIP call termination provider requires (in order to get their best rate) all calls to go through their Nextone

Hi, has anyone connected Asterisk to Cirpack softswitch sucessfully ? Any howto or more info about needed Asterisk SW and setup ? Thanks in advance, regards, Rob.

Hi List; Where I determine the codec to be used for the SIP Trunk (between Asterik and another SIP softswitch)? Regards Bilal ____________________________________________________________________________________ Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545433

Hi All, I want to use Asterisk for VoiceMail for a softswitch. I can dial in to leave voicemail and retrieve. Now there are many SIP Endpoints registered to the Softswitch. The Asterisk is sending a NOTIFY msg to the Softswitch on <ip addr>:0 Somehow Asterisk Looses the port from where the INVITE came in, this NOTIFY msg is not going out of the Asterisk, I cannot see in Ethereal.

Hi All, I've been experimenting during this weekend with asterisk as a softswitch, talk about me being completely lifeless, but let not talk about that. I've been conducting some really funny tests, trying to get an optimal SoftSwitch functionality. Here is my current setup: Source: Windows XP Pro + SJphone Box 1: Asterisk running in PassThorugh mode Box 2: Asterisk running in

HI all, I have the following setup running: EP<--->Calling Asterisk<--->Relaying Asterisk<--->Softswitch<---> PSTN The Endpoint EP is registered with the Calling Asterisk. Calls are forwarded from this machine to Relaying Asterisk which in turn forwards it to the Softswitch. In addition, this machine also relays back responses from the Softswitch to the Calling

I'm trying to move the asterisk server to an Amazon Web instance. We have teliax for our sip provider. I'd like for our DID lines to be connected to a users cell phone. Seems simple enough, but I'm getting the dreaded one-way audio, even with nat=yes everyplace I can think of. The dialplan is real easy: [from-teliax-sip] exten => _j.,1,NoOp("From teliax sip with exten

>I spoke with someone today who is interested in an IP Centrex solution that >starts with about 3500 extensions in a multi-tenant application. And >growing from there. > >I'm wondering about scalability of Asterisk. I'm trying to put my head >around how to put the whole thing together, if it can be put together. > >The nice thing about it is that if I can show

Hi guys. I'm working on a VOIP service provider. We have two customers running asterisk. Customer A and B. When A call to B everything is ok. When B call to A the call ring but sip messages didn't arrive on asterisk A. In my softswitch i see the invite sip message sended to A. When every other numbers(TDM and SIP) call do A everything is ok. Have any issue in asterisk that can resolve

I'm having problems getting Asterisk SIP to register with an Entice softswitch SIP Gateway. My provider tells me that all thats needed is a user name, password and the IP address and to register and it needs to be using MD5 authentication. I continualy get a "603 Decline" message. The provider of the gateway says they are not receiving any authentication information. Registration