similar to: Asterisk <-> Noetel C15K ?

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

[asterisk-users] Asterisk <-> Nortel Phone Switch Date: Thu, 29 Nov 2007 07:52:17 +0000 (GMT) X-Mailer: sendEmail-1.52 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----MIME delimiter for sendEmail-20854.4017086787" This is a multi-part message in MIME format. To properly display this message you need a MIME-Version 1.0 compliant Email program. ------MIME delimiter

Still trying to make my Asterisk PBK talk to our Nortel Phone Switch (C15k). Nortel did an upgrade which changed a bunch of things today, so I thought I'd give it another shot. It looks like I'm much closer this time, but still no go. Can't do calling in either direction. Anyone have any ideas? Thanks! Shawn [nortel] host=10.0.0.10 insecure=very type=peer qualify=no

Still trying to make my Asterisk PBK talk to our Nortel Phone Switch (C15k). Nortel did an upgrade which changed a bunch of things today, so I thought I'd give it another shot. It looks like I'm much closer this time, but still no go. Can't do calling in either direction. Anyone have any ideas? Thanks! Shawn [nortel] host=10.0.0.10 insecure=very type=peer qualify=no

Hi all, I've seen a couple of posts recently from people who are doing something with Asterisk and a T100P and a Nortel PBX. However it's not clear exactly what they are doing. Does anyone know if it's possible to use a T100P or T400P as a DSX-1 interface to connect to a T1/PRI CO module in a Nortel PBX? We have a Nortel Norstar Modular ICS PBX and I'd like to plug its CO

Is it possible for a Cisco 7960 phone with SIP firmware to connect to 2 different SIP servers @ the same time? I currently have an asterisk box @ home with several sip extensions and a Nortel C15k phoneswitch at work (not the pbx, the full phone switch). I can connect from the SIP phone to the Nortel phone switch, but cannot make asterisk talk to it at all (if anyone has any ideas on this one,

Thanks Brian, and thanks again for the included definitions <grin> - that helped too. Your comments are really helping clear many questions. I suppose our intensions are to become an IXC. So if my local carrier is sporting old technology, they'll provide TDM services. So if I understood you correctly, the "in-band signaling" is typically SS7, and the alternative is typically

Hello, I am using a Cisco-2,811 as a gateway between the Asterisk PBX and our Nortel TX-1 university's PBX. It is working but no names are exchanged. From the debug mode I see that the Cisco sends the display name (which does not appear on the Nortel's phones) and the Nortel does not bother to send it at all. I recall that when I had a pilot with Cisco CCM two years ago we had to set

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

I've been trying to look up information on upgrading firmware on a nortel i2004 ip phone. I have this phone leftover from a trial, and it's supposed to be upgradable to current firmwares. Since I also run a DMS I was able to login to nortel's site and get all the firmware files, but All the NTP's regarding firmware upgrading these are how to tell you BCM to send the file to it.

Hey All, I have an Asterisk box connected to a Nortel Option 11C via a T1. In the Asterisk box we have a Sangoma A101C and in the Nortel we have a TMDI card. The Nortel is also hooked to the PSTN via a T1 on a different NTAK09 PRI card. I've included the Zapata.conf and zaptel.conf files below. Our issue is that when a call is sent over the tie line between the two systems, the audio on the

Pardon my ignorance, but I was hoping someone could clear up something for me. - For a few POTS lines, digium has a single port card for that, or a T1 card to a channel bank. - For 10 or more lines, digium has a T1 or E1 card for that too based on PRI channels - For 100's to 1000's of lines, I suspect a soft-switch is in order??? A traditional phone company will sell: - POTS lines for

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

I think your phone may be trying to register with the username '1234', while your sip configuration is expecting 'luca'. Can you try changing your phone registration credentials to use 'luca'? Can you give us a sip transcript when you try to place a call from it? On 15-05-28 05:09 PM, Luca Bertoncello wrote: > Darryl Moore <darryl at moores.ca> schrieb: >

help me in another issue related also to registering asterisk with another softswitch: A) If nat=yes, then I have to set canreinvite=no to be able to register, correct? B) In case of using firefly softphone, how it possible to set it to have nat=yes (at the firefly it self and not at the sip user configuration section)? As most of the sip endpoint give an option to set nat=yes and so on, how it

Dear List; I am trying to create a link between Asterisk and My softswitch, the link to be SIP Trunk. I did the below configuration and I do not know if any one can help me and advise me to have better configuration to be sure that link is fine. But I do not know how to determine the SIP username to be sent for my softswitch as sometimes the softswitch need to check it. Also, does asterisk

Hi list! Finally I got my wife's phone working in my Asterisk. Unfortunately I have some problems, too... Current situation: - AsteriskNOW with 4 Accounts (00493511111111, 00493512222222, 00493513333333, 5678). This is "for test" and it will be replaced by "the real world", when I got my Asterisk to work... - A second Asterisk (Ubuntu-PBX) on another VM, logging in

If one of the authors is listening: http://www.asteriskdocs.org/html/apas02.html lists usereqphone 2 times. One of the entries should really be useragent. And the example for usereqphone is wrong. Regards, Philipp Kempgen -- amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de Let's use IT to solve problems and not to create new ones. Asterisk? ->

Hi All, I want to use Asterisk for VoiceMail for a softswitch. I can dial in to leave voicemail and retrieve. Now there are many SIP Endpoints registered to the Softswitch. The Asterisk is sending a NOTIFY msg to the Softswitch on <ip addr>:0 Somehow Asterisk Looses the port from where the INVITE came in, this NOTIFY msg is not going out of the Asterisk, I cannot see in Ethereal.

Darryl Moore <darryl at moores.ca> schrieb: > Ahh. Seen that before! That suggests to me that you don't have your > sip.conf records setup right. > > What's your sip.conf look like? Well, here what I wrote in my sip.conf: register => 00493511111111:MYSECRET at pbxluca/00493511111111 register => 00493512222222:MYSECRET at pbxfax/00493512222222 register =>