similar to: Basic connection to Nortel C10k?

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

Still trying to make my Asterisk PBK talk to our Nortel Phone Switch (C15k). Nortel did an upgrade which changed a bunch of things today, so I thought I'd give it another shot. It looks like I'm much closer this time, but still no go. Can't do calling in either direction. Anyone have any ideas? Thanks! Shawn [nortel] host=10.0.0.10 insecure=very type=peer qualify=no

[asterisk-users] Asterisk <-> Nortel Phone Switch Date: Thu, 29 Nov 2007 07:52:17 +0000 (GMT) X-Mailer: sendEmail-1.52 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----MIME delimiter for sendEmail-20854.4017086787" This is a multi-part message in MIME format. To properly display this message you need a MIME-Version 1.0 compliant Email program. ------MIME delimiter

Still trying to make my Asterisk PBK talk to our Nortel Phone Switch (C15k). Nortel did an upgrade which changed a bunch of things today, so I thought I'd give it another shot. It looks like I'm much closer this time, but still no go. Can't do calling in either direction. Anyone have any ideas? Thanks! Shawn [nortel] host=10.0.0.10 insecure=very type=peer qualify=no

I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed to asterisk and the call cannot proceed. This only

I am using asterisk 1.4.32 and wish to connect using SIP to a nortel 1000 switch with the ability to have 90 calls at a one time outgoing or incoming. the nortel reseller is asking me what to do. I dont know nortel at all. I thought I just needed a "SIP trunk and IP address of the their server and an account name, and provide her my IP address". They didn't know what to do with

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back and forth to an asterisk box. Right now,

Hi, I have asterisk running a single T1 card with a connection to a nortel CS 1000. All calls to extensions, local and long distance are working just fine. My issue is this: The nortel CS 1000 supports connections to and intercom system that is just line level audio to speakers. When my PRI tries to call this "extension" it is never answered so my AGI never runs to play a message

All, I am connecting to a CS 1000 nortel PBX. I can call out, I have limited success with call in. I get debug traffic that a call is coming in but I get the message "Unable to create/find channel". I was expecting that incoming calls over the trunk would be handled from my sip definition and goto the nortel context. It is not. Below is the actual incoming call debug information. I am

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Hi Srs. we have to integrate a Nortel MATRA M6501-L with Asterisk with a TE410P. All call from outside get into asterisk and asterisk send to Nortel in a correct way. My problem is when a call is made from Nortel to Asterisk. If we digit a national Number in Spain([98]ZXXXXXXX or 6XXXXXXXX) all work find. But if we digit an international number call doesn't progress. I Have seen in

Hello, I am using a Cisco-2,811 as a gateway between the Asterisk PBX and our Nortel TX-1 university's PBX. It is working but no names are exchanged. From the debug mode I see that the Cisco sends the display name (which does not appear on the Nortel's phones) and the Nortel does not bother to send it at all. I recall that when I had a pilot with Cisco CCM two years ago we had to set

Does anyone know if Asterisk can function as a voicemail system for a Nortel Option 11 PBX? We will be connecting Asterisk to act as an IVR before sending calls to the Nortel and as a Voicemail system in case the user does not answer. That part is trivial, the only problem we have is that the customer wants the Voicemail light on the Nortel phones to light up when a user gets a new message.

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

I am connecting to a Nortel CS 1000. I can place calls out to an extension so we are half way there. When calling into the box I get the following from sip debug ip X. I get dead air when calling into the box. In my sip.conf I have a context of nortel and in extensions.conf the nortel context just has a s,1,Playback(demo-congrats). Any suggestions as to why the call in might not be working but

Hi. I had successful confiured my Asterix PBX, but now I need to connect it to a Nortel Meridian phone plant, I got a Digium T100P on the machine I got the Asterisk and I already connect it with the phone plant, I need to know what configuration do I have to do so the ip extensions can make calls to the extensions of my plant Nortel. And extensions from the Nortel plant can call ip extensions of

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is