similar to: Is there real benefits on a SMP machine for Asterisk?

Hi list, I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "*No such command 'zap show'*". I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too. zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!! Any ideas???

I am testing Asterisk 1.4.22, zaptel 1.4.10.1 and libpri 1.4.4 on RHEL5 on DELL PE2950 and using ISDN-10. I thought about cutting over to production tonight when I noticed a serious problem. SIP calls are fine but if I dialed to outside (Dial(Zap/g1)) a few times or someone called in a few times, Asterisk just froze (cannot enter anything on the CLI console) and then even the machine had to be

Hi Guys, I am getting a complain that call on analogue lines (Sangoam A400D) drops all of a sudden. Here is what I see in logs: [Jul 28 15:49:08] DEBUG[21438] dsp.c: ast_dsp_busydetect detected busy, avgtone: 75, avgsilence 135 [Jul 28 15:49:08] VERBOSE[21438] logger.c: -- Executing [h at macro-dialout-trunk:1] Macro("SIP/2111-b6a400b0", "hangupcall|") in new stack [Jul

when I run dmesg PE2950 Dell Server I see the following line Linux version 2.6.18-92.1.6.el5 (mockbuild at builder15.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Wed J un 25 13:45:47 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 -

Hello, Is it possible to alter how XCP enumerates multi-core cpu’s such that a Vcpu represents a “socket”, rather than a “core”? A server with dual quad core processors, no HT, presents each of the 8 cores as a Vcpu to the guest. Windows Server 2008 R2 see’s each Vcpu as a unique “socket” and we are therefore coming up against licensing issues with Windows and more importantly SQL Server 2008

I have CentOS 5 installed on a few Dell PE2950 systems. ? ?The SMART daemon claims the drives included with the server do not support SMART, which rather surprised me. What, then, are my options for monitoring the health of the server hard drives? ?It would be nice to have some service running I could email to myself on the status of each drive. Thanks. Scott

I've purchased an LG DVD Burner (GSA-E60L) External super Multi DVD Rewiter for my PE2950 Dell Server attached via USB. Can someone guide me to set up the DVD with Linux, and which tools should I use to burn DVD? [root at PowerEdge1 /]# cdrecord -scanbus Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J?rg Schilling Note: This version is an unofficial (modified) version with

Hi, I'm currently (re-)planning my email setup and have been doing some research. I have done some searches and read several threads in the areas of my questions here. While there are some that come close I haven't yet been able to get all my questions answered. I currently run a postfix, dovecot & roundcube setup and have about 2000 active accounts. I have a separate SMTP server

Greetings all- I have a CentOS 5 (Final) system that is serving up content to several other hosts via NFS. The amount of data transferred is rather small as most of the files are under 100kb and each export has maybe 100 files that are accessed regularly. I'm finding that as I add more hosts accessing the NFS server, the performance seems to be getting poorer. There are obvious delays when

last night I checked the log messages on the server Dell PE2950 6xSAS 146G I found the smartd running , I did not request such daemon [root at PowerEdge1 pons]# tail -f /var/log/messages Aug 25 08:27:30 PowerEdge1 smartd[8039]: Home page is http://smartmontools.sourceforge.net/ Aug 25 08:27:30 PowerEdge1 smartd[8039]: Opened configuration file /etc/smartd.conf Aug 25 08:27:30 PowerEdge1

Hi guys, do you know if it's possible to handle more than 1 call per card with astcc ? Thank you.

I've got a new PE2950 rack system with PERC controller and 6 drives set up contiguously as one RAID5 volume on the PERC controller. Using 64-bit CentOS 4.4, I partitioned for /boot having 100 Meg, swap having 2 gig, and / with the rest (removed LVM). After the install was complete, the system rebooted and just gave me a broken grub prompt (not the graphical Grub boot selector, but

hi, I have to configure Xen server and DomU''s which should be able to talk to different vlans - depending on services put on DomU''s. I would like to enslave 2 NICs via bond interface. Both NICs are on trunk ports which are configured in the same way, the same native vlan. I don''t know, if I have to add vlans tagging to eth* interfaces then enslave tagged eth*

Hi list, I'm having problems transferring certain calls made by the attendant between the PSTN and to an internal extension. Although, transfers between the majority of the calls ends successfully. Debugin this, I've found that calls made to certain "numbers" (Telephony Providers), aren't detected as ANSWERED in the CDR, so they are not properly accounted (for billing),

Hello! Recently I posted a question about an installation I have that was experiencing glare problems. The solutions presented were to use inverse inbound and outbound line groups and to use groundstart signalling. As it turns out, the Sangoma A400D card that is in use does NOT support groundstart. I've confirmed this with a Sangoma engineer and their support staff. I've also read that

Hello! As the subject states, I'm experiencing an odd issue with one of my client's systems. We're running a Sangoma A400D card with 8 FXO channels. The POTS line on channel 5, whenever called, generates the following message on the asterisk console: Apr 29 10:35:08 WARNING[16927]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 5 Apr 29 10:35:09

supervision. Verify if for those "numbers" the CO revert the line polarity when callee answer. callprogress=no is a good test too. Jorge Ra??l G??mez C. wrote: > Hi list, > > I'm having problems transferring certain calls made by the attendant > between the PSTN and to an internal extension. Although, transfers > between the majority of the calls ends successfully.

Hi list, I'm wondering if it's possible to transfer a call that is still ringing??? Actually, the problem is that my telco provider doesn't offer an uniform method for answer/disconnection supervision, and by that I mean, some of it's line (I think) offer a polarity reversal, but other lines (of the same service provider) do not offer anything at all, so the answer of a call

CentOS 4.6 x86_64, Dell PE2950 with DRAC5, onboard SAS RAID 1, 2 arrays. After booting installed system, /dev/sda exists but does not appear to be a hard disk. fdisk -l displays nothing for sda. CentOS is on /dev/sdb and the second RAID 1 array is now /dev/sdc. It's been suggested (in the Dell Linux mailing list) that it is related to the virtual CD device of the DRAC. But why would it

Hi, I know it''s a problem that has already been discussed, but as I didn''t see any solution, I''m asking... We''ve been trying to use Xen 3.0.3 HVM mode with windows or linux in the past few weeks, and have been suffering from bad network performance. First, I must say that we didn''t succed to setup Windows 2000/2003 directly using  Xen, we had to