similar to: Help 60Hz Hum?

Ok Guys, I've done a tonne of hunting around on this problem, but can't find much help. I'm running: asterisk 1.4.19.1 libpri 1.4.3 and zaptel 1.4.9.2 which I believe has been modified by RedFone to add the ztd-ethmf module. My interface is a RedFone foneBridge2 4 Span; and I'm connecting to a BT E1 PRI / ISDN30e with 15 lines on span 1, and a legacy Panasonic PBX on span 4. Upon

Hello List Does anybody have any experience with the FoneBridge line of products from RedFone? I think their HA implementation sounds interesting, and like the prospect of having dedicated hardware for our PRI connections. Kind Regards Jon Leren Sch?pzinsky

I've been asked to look at deploying Asterisk in a high availability environment and I've been looking so I've been searching for methods to decouple the voice PRI circuits from the Asterisk server so failover to another server could take place. I've been looking at the RedFone foneBRIDGE2 2e1 product here:

So here is my setup. Hardware: Intel P3 1.2 Ghz 1 GB RAM 36 GB Drives Mirrored Software: CentOS 5 2.6.18 Kernel Asterisk 1.4.14 Zaptel 1.4.7 (redfone) LIbpri 1.4.2 I'm using TDMoE with my PRI using a product called fonebridge from a company called redfone. They require that I use their own build of zaptel and I am trying to figure out if the problem is with them or something else. The

I'm looking for reports of recent experience with redfone fonebridge2 (with echo can) TDMoE gizmos. Anybody? Good? Bad? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080609/23aeddd6/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s

I'm scoping out HA for a relatively simple Office/Call Center PBX. Current setup uses a TE412P with 4 PRI our telco with SIP hard/soft phones for users. Some outbound also goes to a SIP provider. Active/Active looks to be too much hassle for an installation this size, so we're looking at adding an extra * in an active/passive configuration with Linux-HA in between them. Does anyone

Need to add some fxs and fxo ports behind a fonebridge2 box any recommendations a channel bank Thanks Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070829/1131cad4/attachment.htm

Hello, I'm trying to decide between the foneBRIDGE2 ($1135) and foneBRIDGE2-EC ($1610). Has anyone here directly compared the two? Would we really suffer without the onboard echo cancellation? The manufacturer's site doesn't really give much helpful information about choosing one over the other. Thanks. -- Kevin DeGraaf

Has anyone on the list used a Soekris engineering PC as a TDM - Ethernet bridge? For example something like a net4801 with a TE110p in it and then using TDMoE to get it into a bigger server where the call processing proper will occur. Anyone know if it might handle a quadspan card ok? (no transcoding, just pure PRI to TDMoE bridging). Craig

Hello Out of curiosity, has someone managed to run Asterisk on a Beagleboard for home-use? www.beagleboard.org As an alternative to a PC, it can be powered from a USB hub, so that would make for a compact, fanless Asterisk server. Thank you.

We tried them out early last year when we were looking at a large deployment and they gave us a lot of the redundancy that we wanted. However we did run into issues where calls seemed to get caught up in the system. It was as far as we could tell rather random. No consistency to it at all. Asterisk hung up the call but the telco side of the line didn't actually hang up. The channel was left

I hope someone can help me out with this issue. It has been dogging me for months and I can't seem to get it to go away. I have a Rhino Ceros box running Asterisk 1.4.21.2 connected via eth0 (nVidia MCP61 Ethernet) to a RedFone FoneBRIDGE2 dual-port with EC. The FB is the latest hardware rev and the latest firmware. I'm running the latest fonulator version and I'm running Zap-1.4.11

Rich Hi, After Qwest pronounced my circuits as within spec. (yes, disconnected from the house) I listened on the lines with my butt set. Clear of all noise and hum. I then got my box of Cat3 and laid a circuit around the outside of the house and into my lab. Still clear of all noise and hum. I then connected the circuit to the Adtran and made a call. Lots of hum and buzzz. As I said,

Hello, I want to create channel bank in this case: "channel bank" |-----------------------------------------| | FXS,FXO<----->TDMoE<--|---------------------------------->Asterisk |-----------------------------------------| How can it?

Hi all I am looking at implementing asterisk at a company with two ISDN bricks (60 lines). I know that the VoIP will absorb at least on brick worth of lines but that still leaves me with a need for 30 ISDN lines. As far as I can tell most of the Digicom cards have 4 FXS ports and I've read on this list that at most two could coincide in a box simultaneously without causing an interupt

It is amazing to me at this point that there is not an official Digium list of supported servers (including 1u models!). Clearly the number 1 issue with the Digium PRI cards is the server that they are used in. The new cards even go as far as listing server that DO NOT work on the Digium site! The wiki references are old and do not have any testing parameters. C'mon guys! Certify a

First, Something seems to be wrong with the list. I'm not the only person who has expressed seeing their messages either arrive late, or not at all. With that out of the way.. Is anyone aware of any type of failover device for PRI on asterisk? I've found the ISDNGuard, however it is currently not made in the U.S., nor does it run on U.S. power. Is anyone aware of a device that will

We have been using Red-fone foneBridge2 Quad T1/E1 for last few years. As these devices are not available anymore, we are looking for alternatives. Are there any similar devices available ? -- Regards, Tirveni Yadav www.udyansh.org What is this Universe ? From what it arises ? Into what does it go? In freedom it arises, In freedom it rests and into freedom it melts away. Upanishads.

For high-availability Asterisk when using PRI Lines, you might also want to check out our product (FSV-4PFS). It's available at www.failsafevoip.com Bill Also to add to the last post does this device have hardware echo cancelation? if it does it could be a great replacement, if not may not be what I'd really want to use. Thanks, tom I've been looking at the RedFone foneBRIDGE2

We have been running around than 40 asterisk servers running on Debian Squeeze for last three years, handling traffic of more than few hundred thousand calls per day. Our setup's PRI-banks were using Redfone's Fonebridge. We had PRIs from multiple telephony providers. And Redfone's Fonebridge handled all that easily. But all good things come to end. Redfone's Fonebridge was not