similar to: Where to download Junghanns ISDNguard software?

Hi all, I recently purchased a Junghanns ISDNguard and to my horror I found out: - Junghanns technical support is non-existant - I can't use it without recompiling Asterisk with res_watchdog My situation: - Recompiling Asterisk with thrid party code is not an option us - We only need it for manual failover - don't require all the fancy monitoring stuff I need a simple shell script

Hi, 1. How have you connected your ISDNGuard (see http://www.junghanns.net/en/ISDNguard_produkt.html) box to your server ? Datasheet mentions RS232 requirement so I'm wondering if a USB-serial cord could fulfill this requirement ? 2. How does it go back into standard mode from failover mode ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I tried "upgrading" from debian's 1.4.21.2 package to vanilla 1.4.22 but then my TE410P alarms stay RED and no zap channels can be created, even if they are correctly listed by "zap show channels". I tried adding "dahdichanname = no" to asterisk.conf's [options] to no effect. Going back to 1.4.21.2 brings my alarms back to OK. This is with zaptel

First, Something seems to be wrong with the list. I'm not the only person who has expressed seeing their messages either arrive late, or not at all. With that out of the way.. Is anyone aware of any type of failover device for PRI on asterisk? I've found the ISDNGuard, however it is currently not made in the U.S., nor does it run on U.S. power. Is anyone aware of a device that will

Hi list, Last Friday, an Asterisk server became unresponsive after ~8,5 months of smooth operation (~320000 calls). Server did reply to pings, but no ssh, no more console login. Also Asterisk no longer took calls, but ISDNguard watchdog was still alive. Looking at the logs after reboot, I could not find anything significant, except in a file created by the following command via a cron job:

Hi, I'm wondering what the best option to obtain a high availability asterisk server is. I currently use a TE410P (4 x E1) card. I'm thinking of 2 different solutions: - 2 servers configured with Heartbeat + DRBD (drbd mainly for voicemail....) and the E1 span plugged to the 2 servers (with a TE410P in each server). - 2 servers configures with Heartbeat + DRBD with the E1 span hooked

For high-availability Asterisk when using PRI Lines, you might also want to check out our product (FSV-4PFS). It's available at www.failsafevoip.com Bill Also to add to the last post does this device have hardware echo cancelation? if it does it could be a great replacement, if not may not be what I'd really want to use. Thanks, tom I've been looking at the RedFone foneBRIDGE2

Hi, I've been developing some CTI software around asterisk for a while, mainly with the help of AMI and fast AGI. It works quite fine, but I have some trouble sometimes with the un-synchronized property of these 2. Let me explain, we have a dialplan like this one : exten = s,n,UserEvent(useful_input_data) (...) a few actions exten = s,n,AGI(agi://127.0.0.1:3333/fetch,queuename) The idea is

Hi everyone, I am considering writing some code using libiax2. Are there any good resources to get started with this? Books? Sites? Thanks -- "I never look back darling, it distracts from the now", Edna Mode (The Incredibles)

Hi all, I'm planning on connecting our Asterisk to our legacy PBX (an Avaya INDeX). I was originally going to sit it between our ISDN connection and the INDeX (tried it, worked ok) but now I intend to hang it off a spare PRI card just so should the * fail we keep our ISDN's at the INDeX, yes I've looked at ISDNguard but little info from the manufacturers. Anyhow, I'm now

Hi All Does anyone have any ideas around what processing power is needed when bridging PRI channels and recording? I am not sure how the bridging takes place with and without recording? I basically have a situation like this: Telko <----> Asterisk <-----> Legacy PBX Where the lines are PRI's between Telko and Asterisk and Asterisk and the Legacy PBX. At what level does

Hi Everyone... I am running Asterisk 1.2.22 on Debian "Etch". I installed it from sources. I have also installed tiff-v3.6.0, spandsp-0.0.3. and downloaded http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_rxfax.c http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_txfax.c and a Digium TDM card with 4 FXO ports When my dialplan

Does anyone have any recommendations on how to connect 160 analogue phones to an asterisk PBX? Background information: A client wishes to replace their current PBX with a new VoIP system. Currently they have 2 PRIs. I intent to set up 2 asterisk PBXs with Debian GNU/Linux on raided drives. These drives will be mounted only read-only to recover gracefully from power-cycles. I am considering 2

I know it is a strange arrangement but due to contracts, it is what it is, no PRI for now. I wonder if anyone on the list has run a server with both types of cards installed? Results? I have never touched a BRI except in concept and Cisco lab. Not sure what the BRI stuffed package may or may not do to anything else that might relate to zaptel or Sangoma. Thanks, Steve Totaro

Hi! Asterisk in Debian/Lenny claims to be bristuffed, not? At least the the Debian patch tracking system shows the bristuff-patches: [1] http://bit.ly/bRRHe7 We have a QuadBRI-Card and recently needed support from Junghanns.net but they refused telling us there is no bristuff installed because of the show version output: *CLI> show version Asterisk 1.4.21.2~dfsg-3+lenny1 built by pbuilder @

Good afternoon, I have to develop an Asterisk system in Spain that can support up to 8 simultaneos ISDN calls (4 BRI), initially only 6 simultaneos calls. I have been looking into VOIP-INFO and I found that the Junghanns card QuadBRI is a very good option. But when I look for a server to develop the system, the information is a bit more confuse. Any one have experience with this card? Which

Hi, has anyone succesfully installed such scenario ? I'm having problem with Award bios mb pc's... it do works with others, what's your idea ? Tnx ! -- Best regards, Alessio mailto:afoc@interconnessioni.it

Please can you explain in more details as to what your problem is? I have 2 cards working in one PC, but have had problems with Dell motherboards. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Alessio Focardi Sent: 17 June 2004 11:41 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] HFC ISDN card

We have set up an HP DL380 with 3 4BRI cards, Fedora core 2 (kernel 2.6.10) and asterisk (bristuff-0.2.0-RC7f with asterisk 1.0.5). 4 ports are configured in TE mode and connected to the PSTN; the other 8 are in NT mode and connected to isdn phones. the other outbound calls to PSTN are fine, however, when we call cellular phones, often audio is one-way (i.e.: the cell phone user can not hear,

Good day all Is there a fix for these errors yet for the junghanns cards Jul 26 17:15:05 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 1 z2 107 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 5 z1 118 z2 97 Jul 26 17:16:33 pbx1 kernel: qozap: dropped audio card 1 cardid