similar to: Asterisk+Sipura 3102+PSTN line

Hi list I'm kinda new to asterisk and I'm woriking for a company that sells Asterisk solutions and appliances. I installed TrixBox on a litle PC @ home and a x100p card which is recognized as a Zaptel card, I made some in/outbound routes and they seem to work but I have a problem with SIP softphones. I created 2 estensions 1000 and 1001 they're both in different cities, when I 1000

Hi to everyone! I have succerfully instaled my new Asterisk 1.4 on my debian etch. I have my users in sip.conf like this: [200] type=peer host=dynamic context=home secret=200 callerid= 200 dtmfmode=rfc2833 nat=yes mailbox=200 at home disallow=all allow=ulaw I can make calls in my LAN but i can?t ear comunications with another client trought Internet. My Asterisk is in my LAN and i not have a

Hi all: Im kind of new on R and I need help changing a table. The thing is, i read a file on R using the read.table command and the table looks like this: Item 3d Plot XY plot 001 1 0 001 0 1 001 0 1 002 1 0 002 1 0 002 0 1 ...

Dear all, I use Trixbox as my PBX. Until a couple of days I've installed a GSM Gateway to communicate with our three cellular phones: 15 64227777 15 64228888 15 64229999 The GSM Gateway has just one SIM. I use the Free PBX web interface in order to set up the route and trunk parameters: Trunk: ******* Name: SIM1 Peer details: host=10.10.1.2 (IP from GSM Gateway) port=5060 type=peer

Anyone else got a Sipura 3000 in the UK? Apart from CID not working it also seems to not notice any of the line state changes on the PSTN when the remote party terminates the call. It only recognises the offhook signal which gets sent much later. Chris

Hello, I'm configured Sipura-3000 to forward IP calls to PSTN number on no answer (In User1 tab Cfwd No Ans Dest: 123456@gw0) IPPhone ---IP---> Sipura-3000 ---PSTN---> PSTN User Generally it works fine, but Sipura sends back SIP OK to IPPhone just prior to dialing to PSTN number. How to configure Sipura to detect that the remote side on PSTN picks up the phone and only then to

On 16 Jan 2018, at 10:18, Tim Northover via llvm-dev <llvm-dev at lists.llvm.org> wrote: > >> Is the above list complete? Do I understand their purpose correctly (sort >> of)? > > There are components in libunwind (especially) and compiler-rt you'll > also need to look at if you're not on top of an existing runtime. The libUnwind parts are relatively

My apologies for the off-topic post ... No matter what settings I try, when I dial in to the SPA-3000 on the PSTN line, it picks up the call and immediately gives me a fast busy tone then hangs up. The info tab says under PSTN Line status: Last PSTN Disconnect Reason: PSTN Disconnect Tone which seems to indicate that the SPA thinks the caller has hung up. Since I am in Japan, it is possible

Incoming calls from my Sipura 3000 don't seem to be correctly routing to Asterisk (or something?) Here is my Asterisk configuration for my incoming PSTN line: Code: [1000] type=friend host=dynamic context=incoming secret=6769 dtmfmode=rfc2833 disallow=all allow=ulaw insecure=very Inside of extensions.conf, I have this: Code: [incoming] exten => s,1,Answer( ) exten =>

I have two old Sipura 3000 original (green) boxes and they are running perfectly faxes going through, no echo. Firmware 2.0.13(GWg), hardware 2.0.1(1813) Does the number in the bracket means anything? In addition I have Linksys 3000 running the same firmware and same hardware (except the number in the bracket). I can not get to work correctly. The unit has a lot of echo, can not get rid of it,

Hi all, I want to set up a firewall on CentOS 4.4. I wnat to know the diiffrence between port filtering and packet filtering ? Can iptables do both? Is there another pkg better than this? if so, pls let me know. The purpose of this is to setup a firewall for production use. -- Thank you Indunil Jayasooriya -------------- next part -------------- An HTML attachment was scrubbed... URL:

when i wnat to working with realtime and mysql for any context i have to insert (switch => Realtiem/context at extensions) statment into extensions.conf for example if i want to have 10 context, i have to insert these lines into extension.conf : [context1] switch => Realtiem/context1 at extensions [context2] switch => Realtiem/context2 at extensions [context3] switch =>

Hi all, i need sample xml configuration files for linksys pap2, linksys pap-2t, sipura 2100, sipura 2102, 1001, 3000 and 3102. All of these are linksys/sipura products. So if anyone has these sample files then plz share. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am using Dovecot IMAP and added an IMAP folder to an Outlook client which is also popping another account. Both account folders exist in the same client. I am wondering if I can drag the pop-ed mail to the IMAP folder, thereby transferring old mail to the IMAP folder? Outlook allows me to click and drag folders into the IMAP folder. You see where I am going with this, I wnat to

Hi, I've made mysqlf a RPM and installed it. After that i did what i shouldn' do: remove the files it installed. Now, i wnat to install it agai and i can't. Already rebuilt the rpm database ( rpm -vv --rebuilddb), used --force, --replacepkgs, --replacefiles, --justdb, --erase, --initdb, but no good. Been at rpm.org, but found nothing that i already know. Any help would be

I have a router with about 300 clients connecting to it. It has htb with a class per client. I wnat to create a script to prioritise www trafic and ssh trafic over p2p trafic.... this is a sample of what i have now: /sbin/tc class add dev eth0 parent 1:5 classid 1:8012 htb rate 35Kbit ceil 281Kbit prio 6 /sbin/tc qdisc add dev eth0 parent 1:8012 handle 8012 sfq perturb 8 /sbin/tc filter add

Hi all, I am using polr(). The resulting coefficients of first levels are always 0. What to do if I wnat to get the coefficients of the last level 0. For example, suppose x has 3 levels, 1, 2, 3 probit <- plor(y ~ x, data1, method='probit') will get coefficients of level 2, 3 of x, but I want coefficients of level 1, 2 Thank you, Tian [[alternative HTML version deleted]]

Can this be done: Directory structure under ~/News News/agent/nntp/(various server names)/=> thousands of actual news messages/ But also a few files I wnat backed up. Example News/agent/nntp/some.news.server/agent.lib I want agent.lib directory but not all the other stuff under some.news.server ls News/agent/nntp/some.news.server/ agent.lib comp gnu alt The other directories

Dear All, 1)Can I use lm() to fit more than one response in single expression. e.g data is a matrix of these variables R1 R2 R3 X Y Z 1 2 1 1 2 3 .... Now i wnat to fit R1:R3 ~ X+Y+Z. 2) How can i use Singular Value decomposition (SVD) as an alternate to lsq. Regards,

Dear All, Can I use lm() to fit more than one response in single expression. e.g data is a matrix of these variables R1 R2 R3 X1 X2 X3 1 2 1 1 2 3 Now i wnat to fit R1~X1 R2~X2 R3~X3 in turn, and I don't want to do it use loops of couse it it easy to make it using loops,but the proceed is very slow since the data is very big Can't anybody give me some tips or help, my eamil: