similar to: FAX detection not working

This is a follow up to an earlier post. Looking for a means to "individualize" incoming FAX, so as to distribute them to the intended recipient. While the PBX is based on Asterisk, it is not possible for me to "enter" the box to modify things, to any great degree. I thank those who mentioned IAXMODEM, earlier, but that seems a no go. Currently, there is a dedicated T1 into

I have an existing Hylafax system using a mainpine 4 port board, 4 POTS lines. Have a recently installed Asterisk system, with a dedicated T1 line. (Well, it's really a fonality system). What would I need to do, or where is the reading material, for what I need to do, to convert the Hylafax server to use the T1 line? Reliably. Preferably to use DID's as well. The current FAX works

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

Any ideas on how asterisk could accept an email (such as an email to SMS or "number at mybox.org" sort of thing) and make a phone call to a specific number and make an announcement? I imagine the first part is the big question. joe a.

Since the beginning (of my Asterisk life) I have an install that is, supposedly, set up for call waiting. Using a TDM400p, with FXO and FXS modules. On the Analog phones, I can hear the Incoming call (call waiting) tone, but the system does not respond to a "hook flash", to place the current call on hold and answer the incoming call. I have not attempted, nor research how/if this can

While pondering several issues, poor quality PSTN POTS lines, potential cost savings with multiple cell numbers, the FAX problems over TDM400p, etc, I wondered about: Cell phone "Base stations" to replace POTS lines. Devices to "cradle" cell phones and connect to TDM400p, for instance, to mimic PSTN. Are there such beasts, how do they play with asterisk? Will FAX work over

My Polycom phones are displaying time, off by one hour. Seems they are on the old DST rules. How do I fix this? joe a.

Having had various issues with local vendor (begins with "V"). am looking to move to all wireless. Anyone know if current vendor can refuse to port the current land line numbers to a wireless provider? >From what I've read, the Fed's seem to say "no", they cannot refuse, or impede this. joe a.

Excuse me if I recently posted on this, but I cannot find it, in my, or the list archives. Is it possible, when transferring a call, to set the user ID to that of the "outgoing number" instead of the incoming number? I believe the answer is (was) yes. New twist, does it matter what the destination "media" is? Meaning, the call would be coming in on a T1, going out on a T1,

Any great disadvantage to using polycom 300/500/600 vs the 301/501/601? joe a.

Is there more than one version of the Cisco 7960? I see some items advertised as 7960 or 7960G, but searching on 7960 only brings up 7960G info, or ambiguous stuff. joe a.

http://www.wired.com/print/politics/security/news/2007/08/wiretap

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

Hi folks, I was hoping that someone might be able to help clarify some confusion I have on DAHDI Fax detection after spending some time searching. My understanding is this: 1.) Echo cancellation is automatically disabled upon recognition of a CNG tone, regardless of the faxdetect setting. This can only be disabled at compile time. 2.) faxdetect=incoming will, upon detection of a CNG tone,

As a follow up to my previous post, I have now identified what is causing the bug with the grandstream phones. When the line faxdetection=incoming is in the zapata.conf file, the grandstream phones will not ring, nor connect a call to the zaptel interface. Can anyone else confirm this bug? I'm going to play with the different options (incoming/outgoing/both) to see if it makes a

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf:

Hi, I continue the discussion from https://issues.asterisk.org/view.php?id=19103 If T.38 reinvite detection should still work, why it doesn't? If I use faxdetect = t38 it does never detect the fax, even using alaw. Cheers, Darkbasic

Experiencing one way audio using IAX2. I did see some other posts on this, and see there may be some internal issues with asterisk and one way audio. Can this be a widespread problem? So many seem to be using IAX, I find it puzzling. Some information points to this being a problem on asymmetrical connections. This is a decidedly asymmetrical connection, with 1.5 Mbs download and 256 kbs,

Asterisk 16 latest DAHDI 3.0.0 latest Excerpt from chan_dahdi.conf is shown below. I'm trying to enable fax detection on inbound calls so that I can take appropriate action in the dial plan. "dahdi show channel 1" shows "Fax Handled: no". Does that mean that I don't have it configured correctly? [channels] ; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span

I've got a Digium Wildcard TDM410P with one POTS line and three extensions. One of the extensions is connected to a fax modem. This kind of works, but there's a gotcha. If I set faxdetect=incoming in chan_dahdi.conf, then incoming faxes do get routed to the modem and this all works, but outbound faxes fail, with a message like this: [Oct 29 21:57:09] WARNING[16732][C-00000000] app_dial.c: