similar to: meetme conference using g729?

Hello, Is there a way to change the format from the default? 'r' - Record conference (records as ${MEETME_RECORDINGFILE} using format ${MEETME_RECORDINGFORMAT}). Default filename is meetme-conf-rec-${CONFNO}-${UNIQUEID} and the default format is wav. - requires chan_zap.so Many thanks ******************************************************************** This email and any attachments

I have noticed that when I try to connect multiple G729 VoIP devices into a MeetMe conference that I can only add up to the number of G729 licenses I have. Now I would think that because all the devices are G729, this wouldn't be the case and the only license that would ever be used would be if a non G729 device or Zap channel was a part of the Meetme conference. This is apparently note the

We have recently started making more frequent use of the meetme conference of our * system. We are using v1.0.8 with a 2.6.11 kernel on our system. We generally have 4 callers in it: two with the gsm codec and 2 with g729. Initially, the conference works fine and there is little latency. After about 15min., though, the latency is very noticable and by 25min it's unbearable. If we all leave

Hi, im using asterisk-1.2.24 and zaptel-1.2.20, im having a problem running meetme conference, when i try to call meetme i get this from the asterisk console Aug 24 00:14:12 WARNING[15466]: pbx.c:1720 pbx_extension_helper: No application 'MeetMe' for extension (sample, 65000, 1) i recompiled my zaptel and asterisk, but the app_meetme file still didn't install, what am i missing

I haven't seen this appear on the list, so I thought I would resend it... Sorry for the repost if it did appear before... ----- Forwarded message from Michael George <george> ----- Date: Wed, 3 May 2006 21:48:09 -0400 From: Michael George <george> Subject: meetme conference latency degrades... To: asterisk-users@lists.digium.com We have recently started making more frequent use

Hi list, we have 2 asterisk boxes in VM (kvm) on 2 different Dell servers, one is Lenny kernel 2.6.26 asterisk 1.6.2.20, the second CentOS 2.6.18 asterisk 1.4.36 (Elastix). Both 64bits, no hardware involved, dahdi on both machines for meetme timing. Doing core show translation give on the Lenny server Translation times between formats (in microseconds) for one second of data

Can Meetme be made to work with G.729? (I gather not) If a call comes in (internally or externally), the call comes in as a G.729 call, which then re-negotiates to a G.711u call when if gets transferred to a MeetMe room. Is there a way to set up asterisk that will allow me to have internal phones renegotiate to G.711, with the external lines instead transcoding within asterisk. (runtime is more

List, I purchased 2 g729 licenses but I can't get it to answer a g729 call from a cisco router with a vwic card. In the debug output below you will see that asterisk thinks it only supports: (gsm|ulaw|alaw|h263) when it should support g729 according to the config also listed below. The real odd thing is I can place g729 calls to the router, just not from the router to *. Anyone have any

As stated here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+MeetMe A Meetme room uses Ulaw as the audio codec, so if the other channels use different codecs, then * will transcode. Does the app_conference application works the same way? Or if i have SIP/g729 users and i create a conference with other users also at g729 asterisk will not transcode (when using app_conference)?

I installed a hardware g729 codec card in my asterisk, and I'm getting the following error when calling from a g729 sip extension to a SIP trunk also set to g729. The call goes through just fine, but these error messages keep flying by until I disconnect the call. Any ideas? ERROR[11871]: channel.c:1316 queue_frame_to_spies: Translation to slin failed, dropping frame for spies Jun 5

Hi I seem to have installed the G729 codec properly but can't seem to get it to work .. in the Asterisk startup I see .. [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator) == Detected 1 licensed G.729 transcoders WARNING[1074408160]: File translate.c, Line 218 (calc_cost): Translator 'g729tolinb' does not produce sample frames. == Registered translator

Hi Group, i have a MeetMe Question. I use "MeetMe(,Ms)" in the Dialplan and if a Conference Room does't exist Asterisk play (conf-invalid.slin) If i use "MeetMe(${room},Ms)" (value from DTMF Read) and the Conference Room doesn't exist Asterisk don't play (conf-invalid.slin) and Asterisk Hangup the Call. there is a solution for the kind my problem? Thanx and

Ok, I built a test system to duplicate my problem and provide myself a platform that I can mess around with to try and break any features. My problem is G729 pass-through from a gateway to a phone. I think I even have transcoding working, which makes me more confused on what's wrong with my pass-through. It must be a configuration issue. The basics... *CLI> core show version Asterisk

I am trying to create a %100 g729 (with no transcoding) system (using a Soekris, of course). I am running AstLinux with the native sounds, g729 is the only codec allowed, %100 SIP (g729 only allow=) - I think I am covering all of my bases. I have only "format=g729" in voicemail.conf. On an incoming call to a mailbox, everything goes well until recording the message. When the

I haven't been able to find the answer online, and am not currently able to conduct an experiment to find the answer... I understand that in a SIP call where G729 has been negotiated as the preferred codec, a G.729 licence is not consumed until there is a need to perform transcoding, e.g. play a non-g729 sound, or do voicemail, or enter a Meetme, etc. What happens when a SIP call in progress

I upgraded my server from Fedora Core 4 to Fedora Core 5. I was wondering if anybody else has run into the problem and know's the fix? I recompiled asterisk and if I don't have the /usr/lib/asterisk/modules/codec_g729a.so file in place it works. I use or used to use the licensed G729 Codec from Digium. This is the error message from asterisk -vvg: [app_playback.so] => (Sound File

I'm sitting here with my dunce cap on. My weak excuse is that I haven't ever played with g729 before. I have a Sipura 841. I have the phone config set to use g729. Its appropriate sip.conf entry, and the IAX stanza for my ITSP all set to disallow=all, allow=g729. But as soon as I dial, I get a complaint from the server: -- Call accepted by 66.225.202.72 (format g729) --

Hello Everybody, Since I upgraded to 1.4 I always get the difficulties as below, which I have never had in 1.2: [Dec 28 21:05:59] VERBOSE[1734] logger.c: -- Call accepted by 202.153.128.34 (format g729) [Dec 28 21:05:59] VERBOSE[1734] logger.c: -- Format for call is g729 [Dec 28 21:06:00] VERBOSE[1756] logger.c: -- IAX2/VoIPRakyat-2 is ringing [Dec 28 21:06:00] DEBUG[1756]

Yep I did the same. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Francesco Peeters (Asterisk) Sent: Saturday, 21 January 2006 5:34 PM To: fbraeuer@gmail.com; Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users]

Hi all, Some simple questions about codecs: What codec does the Zap channel use by default? Can this default be changed, and to what? (g729 too?) What codec does meetme use? (I think this is ulaw, but asking to be sure) Can you use another codec, or does everything have to be transcoded to ulaw? Finally ... if I have a 3way call going, between 1 g729 caller and two other callers, do I need one